Ureteral ectopia

B. C. Bapna,N. Datta,S. Singh,S. Bhargava,B. Walia,K. Thomas

DOI: https://doi.org/10.1007/BF02752950

Abstract:

What problem does this paper attempt to address?

Isolation of D-aspartic acid beta-methyl ester from erythrocyte carboxyl methylated proteins.

S. Clarke,P. N. McFadden,C. M. O’Connor,L. Lou

Methods in Enzymology

Abstract:
Synthesis, Characterization, and Application of Carboxymethyl Cellulose from Asparagus Stalk End

Warinporn Klunklin,Kittisak Jantanasakulwong,Yuthana Phimolsiripol,Noppol Leksawasdi,Phisit Seesuriyachan,Thanongsak Chaiyaso,Chayatip Insomphun,Suphat Phongthai,Pensak Jantrawut,Sarana Rose Sommano,Winita Punyodom,Alissara Reungsang,Thi Minh Phuong Ngo,Pornchai Rachtanapun

DOI: https://doi.org/10.3390/polym13010081

IF: 5

2020-12-28

Polymers

Abstract:Cellulose from Asparagus officinalis stalk end was extracted and synthesized to carboxymethyl cellulose (CMCas) using monochloroacetic acid (MCA) via carboxymethylation reaction with various sodium hydroxide (NaOH) concentrations starting from 20% to 60%. The cellulose and CMCas were characterized by the physical properties, Fourier Transform Infrared spectroscopy (FTIR), Differential scanning calorimetry (DSC), Scanning electron microscopy (SEM) and X-ray diffraction (XRD). In addition, mechanical properties of CMCas films were also investigated. The optimum condition for producing CMCas was found to be 30% of NaOH concentration for the carboxymethylation reaction, which provided the highest percent yield of CMCas at 44.04% with the highest degree of substitution (DS) at 0.98. The melting point of CMCas decreased with increasing NaOH concentrations. Crystallinity of CMCas was significantly deformed (p < 0.05) after synthesis at a high concentration. The L* value of the CMCas was significantly lower at a high NaOH concentration compared to the cellulose. The highest tensile strength (44.59 MPa) was found in CMCas film synthesized with 40% of NaOH concentration and the highest percent elongation at break (24.99%) was obtained in CMCas film treated with 30% of NaOH concentration. The applications of asparagus stalk end are as biomaterials in drug delivery system, tissue engineering, coating, and food packaging.

polymer science
Carboxymethyl cellulose with tailored degree of substitution obtained from bacterial cellulose

Agustina Casaburi,Úrsula Montoya Rojo,Patricia Cerrutti,Analía Vázquez,María Laura Foresti

DOI: https://doi.org/10.1016/j.foodhyd.2017.09.002

IF: 10.7

2018-02-01

Food Hydrocolloids

Abstract:Among the multiple industrial applications of carboxymethyl cellulose (CMC), those related to food and beverages industries (e.g. as thickener, stabilizer, emulsifier, binding agent), involve one fourth of the global CMC consumption. In the last years, a number of abundant and underutilized vegetable cellulose sources have been assayed as raw material for CMC production, as alternatives to cotton linters or cellulose feedstocks obtained from bleached pulps derived from wood. Alternatively, cellulose of microbial origin appears as a very promising highly pure raw material for CMC production.Together with molecular weight and substituents distribution, it is well established that the degree of substitution (DS) of CMC plays a key role in most food and beverages applications. In the current contribution, highly pure cellulose of bacterial origin was used to produce CMC with tailored DS in a two-stage process consisting of alkalinization with sodium hydroxide, followed by etherification with sodium monochloroacetate. Aiming to get insight into how the carboxymethylation extent conferred to BC can be easily tuned within the DS interval allowed for food uses (i.e. 0.2–1.5), the effects of NaOH concentration, molar NaOH/anhydroglucose unit ratio, molar etherifying reagent/anhydroglucose unit ratio, and etherification time, were systematically analyzed. By proper control of those variables, CMC samples with tailored DS within the 0.60–1.52 interval could be successfully obtained. Samples with varying DS were further characterized by means of FTIR, solid state 13C NMR, XRD and TGA. The suitability of using TGA data for estimating the carboxymethylation extent achieved is proposed.

food science & technology,chemistry, applied
Sustainable Production of Carboxymethyl Cellulose: A Biopolymer Alternative from Sugarcane (Saccharum officinarum L.) Leaves

Teerapong Churam,Phairat Usubharatana,Harnpon Phungrassami

DOI: https://doi.org/10.3390/su16062352

IF: 3.9

2024-03-13

Sustainability

Abstract:This study explores the potential of sugarcane (Saccharum officinarum L.) leaves (SCLs), a significant agricultural waste, for the sustainable production of carboxymethyl cellulose (CMC) utilizing an innovative approach of carboxymethylation with monochloroacetic acid and varying sodium hydroxide (NaOH) concentrations (ranging from 20 to 60 g/100 mL). The optimal carboxymethylation condition was identified as 40 g/100 mL NaOH, which yielded the highest degree of substitution (DS = 0.86). Furthermore, a higher ash content in the obtained CMC indicated significant carboxymethyl substitution within the structure. The chemical structure of cellulose and the resulting polymers were characterized using Fourier transform infrared spectroscopy (FTIR). The FTIR spectrum exhibited characteristic peaks of carboxymethyl groups and their salts at wavenumbers of 1588–1591 cm−1 and 1413–1415 cm−1, respectively. The analyses from X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM) revealed detailed insights into the crystallinity and morphology of carboxymethyl cellulose (CMC). The levels of heavy metals, including arsenic, lead, cadmium, and mercury, in the purified CMC were assessed using inductively coupled plasma mass spectrometry (ICP-MS) and were found to be within the recommended WHO/FAO limits, except for lead, which exceeded permissible levels. The prepared CMC demonstrated high purity at 99.34%, surpassing the 98.00% purity requirement for commercial-grade CMC. This product exhibits strong potential for diverse industrial applications, including paper coating, textile sizing and printing, ceramic glazing, and various uses in the oil industry.

environmental sciences,environmental studies,green & sustainable science & technology
Synthesis of highly substituted carboxymethyl cellulose depending on cellulose particle size

Mst. Sarmina Yeasmin,Ibrahim H. Mondal,Md. Ibrahim H. Mondal

DOI: https://doi.org/10.1016/j.ijbiomac.2015.07.040

IF: 8.2

2015-09-01

International Journal of Biological Macromolecules

Abstract:Corn husk is an abundant agricultural waste. It has great potential for use as a cellulose source for the production of carboxymethyl cellulose (CMC). The chemical composition of corn husk, such as cellulose, hemicelluloses, lignin, fatty and waxy matter, pectic matter and aqueous extract was determined. The cellulose extracted from corn husk was carboxymethylated using sodium hydroxide (NaOH) and monochloroacetic acid (MCA), in aqueous ethanolic medium, under heterogeneous conditions. The carboxymethylation reaction was optimized as to the NaOH concentration, MCA concentration, reaction temperature, reaction time and cellulose particle size. The degree of substitution (DS) was determined with respect to the reaction conditions using chemical methods. The produced CMC was identified by FTIR and the crystallinity of the CMC was determined by XRD. The CMC product had an optimized DS of 2.41 and the optimal conditions for carboxymethylation were NaOH concentration, 7.5 mol/L; MCA concentration, 12 mol/L; reaction temperature, 55 °C; reaction time, 3.5 h and cellulose particle size, 74 μm. These optimization factors allowed to prepare highly substituted CMC with higher yield, 2.40 g/g, providing plenty of opportunities for its many applications.

polymer science,biochemistry & molecular biology,chemistry, applied
Carboxymethylcellulose-Based Hydrogel Obtained from Bacterial Cellulose

Kunjalukkal Padmanabhan,Lamanna,Friuli,Sannino,Demitri,Licciulli

DOI: https://doi.org/10.3390/molecules28020829

IF: 4.6

2023-01-14

Molecules

Abstract:In the present study, we have produced a sodium carboxymethylcellulose (CMC) hydrogel from a bacterial cellulose etherification reaction with chloroacetic acid in an alkaline medium. Bacterial cellulose (BC) was synthesized via economical and environmentally friendly methods using the Gluconacetobacter xylinus bacterium. After purification, freeze-drying, and milling, BC microparticles were dispersed in NaOH solution for different time periods before the etherification reaction. This has allowed the understanding of the alkalinization effect on BC modification. All synthesized CMC were soluble in water, and FTIR and XRD analyses confirmed the etherification reaction. The bath of BC in NaOH solution affects both molecular weight and degree of substitution. SEM analysis revealed the change of BC microstructure from fibrous-like to a smooth, uniform structure. The CMC-0 h allowed the production of crosslinked hydrogel after dehydrothermal treatment. Such hydrogel has been characterized rheologically and has shown a water absorption of 35 times its original weight. The optimization of the CMC produced from BC could pave the way for the production of ultrapure hydrogel to be applied in the healthcare and pharmaceutical industry.

chemistry, multidisciplinary,biochemistry & molecular biology
Alkali induced changes in spatial distribution of functional groups in carboxymethylated cellulose

Paul Bogner,Thomas Bechtold,Tung Pham,Avinash P. Manian

DOI: https://doi.org/10.1007/s10570-024-05798-9

IF: 6.123

2024-03-05

Cellulose

Abstract:The aim of the work was to investigate treatment parameters that exert most influence on performance of cellulose fibers carboxymethylated from aqueous solutions. Viscose fibers were carboxymethylated in alkaline solutions of sodium monochloroacetate at two temperatures (30 °C, 50 °C) and with different levels of alkali (0.5 mol/L and 4 mol/L NaOH). The degree of carboxymethylation was assessed with both back titration and conductometric titration methods, and the performance of carboxymethylated fibers was assessed from their propensity for sorption of the cationic dye methylene blue, a putative wastewater contaminant. Higher degrees of carboxymethylation were generally observed for fibers carboxymethylated in 4 mol/L NaOH, but in dye sorption propensities, the fibers carboxymethylated in 0.5 mol/L NaOH performed better. A combination of observations from dye sorption, color measurement and conductometric titration suggested that dye permeation was greater through fibers carboxymethylated in 0.5 mol/L NaOH as compared to 4 mol/L NaOH. As permeability differences were evinced in cases also where the degrees of carboxymethylation were very similar, it appears that the reaction conditions (i.e., alkali content during carboxymethylation), in addition to degree of carboxymethylation, affected fiber performance. The effect of alkali may stem from their influence on the topographical distribution of the substituted carboxymethyl functional groups.

materials science, textiles,polymer science, paper & wood
SYNTHESIS AND PROPERTIES OF CARBOXYMETHYL CELLULOSE FROM AGRICULTURAL WASTE – SUGARCANE LEAVES

ACHARAPORN RATANAMANEE,SUPATTARACHAI SUWANNAPAN,SUPHAPAN SATCHAWAN,RACHANEEBHORN INKUM,,,,

DOI: https://doi.org/10.35812/cellulosechemtechnol.2022.56.43

2022-06-21

Cellulose Chemistry and Technology

Abstract:"Sugarcane leaves are an abundant agricultural waste with the potential for use as a source of cellulose. Cellulose from sugarcane leaves was converted to carboxymethyl cellulose (CMC) by carboxymethylation using sodium hydroxide and monochloroacetic acid in isopropyl alcohol. The yield of CMC was 212.16%. A degree of substitution (DS) equivalent to 0.79 was obtained during the conversion, indicating that the product was water-soluble. Fourier transform infrared (FT-IR) spectroscopy confirmed the presence of major peaks expected for carboxymethyl substitution, compared to commercial CMC. Thermal properties were studied using simultaneous thermal analysis (STA). Melting temperature (Tm) and degradation temperature (Td) of the sample were 116.6 °C and 270.4 °C, respectively, while the residual mass of 36.49% at 800 °C indicated the presence of a non-volatile component fraction. CMC morphology showed a non-circular form with small particles. Results indicated the potential of sugarcane leaves for production of commercial grade CMC."

materials science, paper & wood
Pre-treatment effect on the structure of bacterial cellulose from Nata de Coco (Acetobacter xylinum)

Rusaini Athirah Ahmad Rusdi,Norhana Abdul Halim,Mohd Nurazzi Norizan,Zul Hazrin Zainal Abidin,Norli Abdullah,Fadhlina Che Ros,Nurazlin Ahmad,Ahmad Farid Mohd Azmi

DOI: https://doi.org/10.14314/polimery.2022.3.3

2022-03-28

Polimery

Abstract:This paper presents a structural analysis of various methods to produce bacterial cellulose (BC) from Nata de Coco (Acetobacter xyllinum). BC sheet, BC chem and BC mech powder were successfully prepared using oven drying, chemical and mechanical treatment. The X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and field emission scanning electron microscopy (FESEM) were used to analyze the structure of prepared BC. The structure of bacterial cellulose was compared with the structure of commercial microcrystalline cellulose (MCC) and cotton fabric. The XRD results showed that the BC sheet sample had the highest degree of crystallinity (81.76%) compared to cotton cellulose (75.73%). The crystallite size of cotton was larger than the BC sheet, with the value of 6.83 ηm and 4.55 ηm, respectively. The peaks in the FTIR spectra of all BC were comparable to the commercial MCC and cotton fabrics. FESEM images showed that the prepared BC sheet, BC mech, and BC chem had an almost similar structure like commercial MCC and cotton fabric. It was concluded that simple preparation of BC could be implemented and used for further BC preparation as reinforcement in polymer composites, especially in food packaging.

polymer science
Production of Bacterial Cellulose in the Medium with Yeasts Pre-Fermented Coconut Water or with Addition of Selected Amino Acids

Xue Lin,Zeming Song,Huanyuan Jiang,Yaofei Hao,Xiaoping Hu,Sixin Liu,Congfa Li

DOI: https://doi.org/10.3390/foods11223627

IF: 5.2

2022-11-14

Foods

Abstract:The uncontrolled natural pre-fermentation process of coconut water represents great hidden safety hazards, unstable production, and impact on the quality of nata de coco-the trade name of bacterial cellulose (BC) in food industry. In this study, BC production from Komagataeibacter nataicola Q2 was conducted in the media of coconut water (50%, v/v) pre-fermented by 11 coconut-sourced yeast strains in static. Results suggested that coconut water pre-fermented by different yeast strains had varied effects on the production of BC. Compared with the use of fresh coconut water, the use of coconut water pre-fermented by Saccharomyces cerevisiae SC7 increased the BC yield by 165%. Both natural pre-fermentation and SC7 pre-fermentation altered the concentrations of amino acids in fresh coconut water. The addition of selected amino acids aspartic acid, glutamic acid, serine, methionine, threonine, isoleucine, phenylalanine, and proline at different concentrations had varied effects on the production of BC. The yield of BC was the highest when adding 3.0% (w/v) methionine. Moreover, adding 3.0% methionine allowed the production of BC with larger loops of looser aggregated microfibers, increased the crystallinity of BC from 64.8% to 69.4%, but decreased the temperature of maximum weight loss rate, hardness, and adhesiveness from 223 °C, 8.68 kg, and 92.8 g.sec to 212 °C, 7.01 kg, and 58.5 g.sec, respectively, in the test condition.
Covert visual spatial attention in boys with attention deficit hyperactivity disorder: Lateral effects, methylphenidate response and results for parents

J. Nigg,J. Swanson,S. Hinshaw

DOI: https://doi.org/10.1016/S0028-3932(96)00070-X

IF: 3.054

1997-01-31

Neuropsychologia

Abstract:
Effects of Carboxymethyl Modification on the Acidic Polysaccharides from Calocybe indica: Physicochemical Properties, Antioxidant, Antitumor and Anticoagulant Activities

Ambika Nataraj,Sudha Govindan,Archana Rajendran,Prasanna Ramani,Krishnamoorthy Akkana Subbaiah,Mirian Pateiro,Paulo E. S. Munekata,José M. Lorenzo

DOI: https://doi.org/10.3390/antiox12010105

IF: 7.675

2023-01-01

Antioxidants

Abstract:An acidic polysaccharide fraction was obtained from Calocybe indica (CIP3a) after subjecting it to hot water extraction followed by purification through DEAE-cellulose 52 and Sepaharose 6B column chromatography. The CIP3a was further modified using chloroacetic acid to yield carboxymethylated derivatives (CMCIP3a). The modified polysaccharide was characterized using various spectroscopic methods. In addition, further antioxidant, antitumor and anticoagulant activities were also investigated. The polysaccharides CIP3a and CMCIP3a were heterogeneous in nature and composed of various molar percentages of glucose, arabinose and mannose with molecular weights of 1.456 × 103 and 4.023 × 103 Da, respectively. The NMR and FT-IR data demonstrated that the carboxymethylation on the polysaccharide was successful. In comparison to CIP3a polysaccharides, the modified derivatives had lower sugar and protein contents, and higher levels of uronic acid. The in vitro antioxidant activity showed that CMCIP3a with higher molecular weight displayed an elevated ability in scavenging the DPPH radical, ABTS, superoxide, hydroxyl radical, ferric reducing power, cupric reducing power and erythrocyte hemolysis inhibition with an EC50 value of 2.49, 2.66, 4.10, 1.60, 3.48, 1.41 and 2.30 mg/mL, respectively. The MTT assay results revealed that CMCIP3a displayed a dose-dependent inhibition on five cancer cells (HT29, PC3, HeLa, Jurkat and HepG-2) in the range of 10–320 μg/mL. The APTT, PT and TT were significantly extended by CMCIP3a in relation to dosage, indicating that the anticoagulant effect of CIP was both extrinsic and intrinsic, along with a common coagulation pathway. These findings demonstrated that carboxymethylation might effectively improve the biological potential of the derivatives and offer a theoretical framework for the creation of novel natural antioxidants, low-toxicity antitumor and antithrombotic drugs.

biochemistry & molecular biology,chemistry, medicinal,food science & technology
Enhanced Carboxymethyl Cellulose Based on Empty Fruit Bunches in a High Degree of Substitution and Thermal Stability as a Biocomposite Film Backbone

Susi Susi,Makhmudun Ainuri,Wagiman Wagiman,Mohammad Affan Fajar Falah

DOI: https://doi.org/10.1155/2024/3319401

2024-08-25

International Journal of Chemical Engineering

Abstract:Carboxymethyl cellulose (CMC), a water‐soluble cellulose, can be derived from oil palm empty fruit bunches (OPEFBs). In addition to being highly soluble, it is essential for CMC to exhibit excellent thermal stability when utilized in biocomposites. Reactants in the alkalization and etherification steps to provide high DS of CMC‐based OPEFB have not been standardized. The research aimed to optimize the alkalization and etherification processes using a response surface methodology (RSM). This will help in determining the optimal ratios of 30% NaOH (the center point of 3), isopropanol (the center point of 30) as maceration media, and monochloroacetic acid (the center point of 1.2) needed for the cellulose. RSM determined the optimum ratio of 30% NaOH to OPEFB cellulose, which was 3.36 : 1, an isopropanol ratio of 30.62 : 1, and an MCA to cellulose ratio of 1.19 : 1. The optimization indicates that the OPEFB cellulose‐based CMC have a high degree of substitution of 1.28 and a carboxymethyl content of 31.93%. CMC morphology showed noticeable changes, such as a smoother surface and swelling. There was a significant increase in the wavenumber of 1580 cm −1 due to the presence of carbonyl groups. The OPEFB‐based CMC resulted in a crystallinity of 40.18%, and thermal gravimetric analysis indicated that mass decreases occurred at high temperatures of 500°C, which suggests that the optimal CMC has a high thermal stability. OPEFB‐based CMC exhibits a high degree of substitution and resistance to thermal degradation, which makes it suitable for further use as the main material in biocomposite films.

engineering, chemical
Carboxymethyl Cellulose Hydrogel from Biomass Waste of Oil Palm Empty Fruit Bunch Using Calcium Chloride as Crosslinking Agent

Nur Fattima' Al-Zahara' Tuan Mohamood,Abdul Hakam Abdul Halim,Norhazlin Zainuddin,Nur Fattima’ Al-Zahara’ Tuan Mohamood

DOI: https://doi.org/10.3390/polym13234056

IF: 5

2021-11-23

Polymers

Abstract:Carboxymethyl cellulose (CMC) is modified cellulose extracted from oil palm empty fruit bunch (OPEFB) biomass waste that has been prepared through etherification using sodium monochloroacetate (SMCA) in the presence of sodium hydroxide. In this research, CMC hydrogel was prepared using calcium chloride (CaCl2) as the chemical crosslinker. Throughout the optimization process, four important parameters were studied, which were: (1) CMC concentration, (2) CaCl2 concentration, (3) reaction time, and (4) reaction temperature. From the results, the best gel content obtained was 28.11% at 20% (w/v) of CMC with 1% (w/v) of CaCl2 in 24 h reaction at room temperature. Meanwhile, the degree of swelling for CMC hydrogel was 47.34 g/g. All samples were characterized using FT-IR, XRD, TGA, and FESEM to study and compare modification on the OPEFB cellulose. The FT-IR spectrum of CMC hydrogel showed a shift of COO− peaks at 1585 cm−1 and 1413 cm−1, indicating the substitution of Ca2+ into the CMC molecular chains. The XRD diffractogram of CMC hydrogel showed no observation of sharp peaks, which signified an amorphous hydrogel phase. The CrI value also proved the decrement of the crystalline nature of CMC hydrogel. TGA–DTG thermograms showed that the Tmax of CMC hydrogel at 293.33 °C is slightly better in thermal stability compared to CMC. Meanwhile, the FESEM micrograph of CMC hydrogel showed interconnected pores indicating the crosslinkages in CMC hydrogel. CMC hydrogel was successfully synthesized using CaCl2 as a crosslinking agent, and its swelling ability can be used in various applications such as drug delivery systems, industrial effluent, food additives, heavy metal removal, and many more.

polymer science
Synthesis of carboxymethyl cellulose from coconut fibers and its application as solid polymer electrolyte membranes

Sun Theo Constan Lotebulo Ndruru,Aziz Daka Syamsaizar,Sandra Hermanto,Boy Chandra Sitanggang,Bibiana Dho Tawa,Aseel Ameer Kareem,Atika Nur Hayati,Benni Ramadhoni,Muhammad Ihsan Sofyan,Dicky Annas,Joni Prasetyo,Anita Marlina,Qolby Sabrina,Evi Yulianti,Sudaryanto,Deana Wahyuningrum,I Made Arcana

DOI: https://doi.org/10.1002/app.55629

IF: 3

2024-04-29

Journal of Applied Polymer Science

Abstract:Carboxymethyl cellulose (CMC) has been obtained by molecular structure modification of coconut fibers cellulose. CMC was blended with CMCh to find an outstanding matrix for solid polymer blend electrolyte membranes, where it was complexed with lithium acetate. The CMC/CMCh (80/20) + 20 wt% LiOAc exhibited the highest ionic conductivity (σ), ionic density (n), ion mobility (μ), and diffusion coefficient (D). These results fulfill the minimum standard for ionic conductivity lithium‐ion battery solid polymer electrolytes. Carboxymethyl cellulose (CMC) is one of the important cellulose derivatives, and it can be developed as a host polymer for solid polymer electrolyte (SPE) membrane. This study aimed to synthesis of CMC from coconut fiber cellulose and it was applied to prepare the SPE membranes. Cellulose isolation was conducted through the delignification and bleaching process, while the CMC synthesis was conducted through alkalization and carboxymethylation treatments. SPE membranes were prepared by blending CMC with carboxymethyl chitosan (CMCh) (80/20) and mixed with various weight percentages of LiOAc at room temperature. SPE membranes characterizations were conducted using FTIR, EIS, XRD, SEM, and tensile testing. Cellulose and CMC yields were 23.1% and 65.44%, respectively. Incorporating 20 wt% LiOAc into the CMC/CMCh (80/20) SPE membrane yielded the highest ionic conductivity of 1.37 × 10−3 S/cm.

polymer science
Preparation of Carboxymethylcellulose Sodium from Mild Liquefaction Residue of Woody Biomass

Qing-yang KONG,Bin SHI,Meng-qi FU

DOI: https://doi.org/10.3969/j.issn.1672-5425.2015.10.015

2015-01-01

Abstract:Cellulose was extracted from mild liquefaction residue of woody biomass and characterized by FT-IR and XRD.Then it was used as a raw material to synthesize carboxymethylcellulose sodium(CMC)by alkali-zation and etherification.The synthetic CMC had higher substitution degree than that of CMC synthesized by cellulose extracted directly from woody biomass,and had better water-solubility.The viscosity of 2% aqueous solution of the CMC product was less than 50 mPa·s,and belonged to low viscosity product.
Bacterial Cellulose-Based Biofilm Forming Agent Extracted from Vietnamese Nata-de-Coco Tree by Ultrasonic Vibration Method: Structure and Properties

Tuan Anh Nguyen,Xuan Canh Nguyen

DOI: https://doi.org/10.1155/2022/7502796

2022-08-23

Journal of Chemistry

Abstract:Bacterial cellulose has recently received more attention in several fields including biology and biomedical applications due to its outstanding physicochemical properties such as thermal stability, biodegradability, good water holding capacity, and high tensile. Cellulose, the most abundant biomolecule on Earth, is available in large amounts in plants. However, cellulose in plants is accompanied by other polymers such as hemicellulose, lignin, and pectin. On the other hand, highly purified bacterial cellulose without impurities is produced by several microorganisms. In which, the most active producer is Acetobacter xylinum. A. This study developed a new process using sonication to isolate bacterial cellulose from nata-de-coco Vietnam. Sonicating time and temperature, two important engineering factors, were considered and discussed (Temperature: 55, 60, 65, 70°C; Time: 15, 30, 60, 90 min). Research results have established that the ultrasonic vibration time of 60 minutes at 65 degrees Celsius gives the best structural properties of BC. The morphology, structural, and thermal properties of the obtained films were investigated by SEM, FTIR, and TGA. Besides, tensile strength was also evaluated. The results show that sonication is not only a favorable technique to isolate cellulose nanofibers but it also enhances their crystallinity.

chemistry, multidisciplinary
Effects of Raw Material Source on the Properties of CMC Composite Films

Yao Yao,Zhenbing Sun,Xiaobao Li,Zhengjie Tang,Xiaoping Li,Jeffrey J. Morrell,Yang Liu,Chunli Li,Zhinan Luo

DOI: https://doi.org/10.3390/polym14010032

IF: 5

2021-12-22

Polymers

Abstract:Sodium carboxymethyl cellulose (CMC) can be derived from a variety of cellulosic materials and is widely used in petroleum mining, construction, paper making, and packaging. CMCs can be derived from many sources with the final properties reflecting the characteristics of the original lignocellulosic matrix as well as the subsequent separation steps that affect the degree of carboxy methyl substitution on the cellulose hydroxyls. While a large percentage of CMCs is derived from wood pulp, many other plant sources may produce more attractive properties for specific applications. The effects of five plant sources on the resulting properties of CMC and CMC/sodium alginate/glycerol composite films were studied. The degree of substitution and resulting tensile strength in leaf-derived CMC was from 0.87 to 0.89 and from 15.81 to 16.35 MPa, respectively, while the degree of substitution and resulting tensile strength in wooden materials-derived CMC were from 1.08 to 1.17 and from 26.08 to 28.97 MPa, respectively. Thus, the degree of substitution and resulting tensile strength tended to be 20% lower in leaf-derived CMCs compared to those prepared from wood or bamboo. Microstructures of bamboo cellulose, bamboo CMC powder, and bamboo leaf CMC composites’ films all differed from pine-derived material, but plant source had no noticeable effect on the X-ray diffraction characteristics, Fourier transform infrared spectroscopy spectra, or pyrolysis properties of CMC or composites films. The results highlighted the potential for using plant source as a tool for varying CMC properties for specific applications.

polymer science
Preparation and characterization of carboxylated cellulose nanocrystals from Oxytenanthera abyssinica (Ethiopian lowland bamboo) cellulose via citric acid anhydrous hydrolysis catalyzed by sulfuric acid

Limenew Abate Worku,Rakesh Kumar Bachheti,Mesfin Getachew Tadesse

DOI: https://doi.org/10.1007/s13399-022-03718-0

IF: 4.05

2023-01-04

Biomass Conversion and Biorefinery

Abstract:Acid hydrolysis, which uses concentrated mineral acids to produce cellulose nanocrystals (CNC), is expensive, overdegrades the cellulose material, and is hazardous to human and the environment. Thus recently, research has concentrated on using organic acids to produce CNC for economic and environmental concerns. This study used citric acid anhydrous (85–100 wt%) with a smaller amount of sulfuric acid (0–15wt%) as a catalyst to prepare carboxylated nanocrystals from Oxytenanthera abyssinica cellulose. The highest yield (89.7%) was obtained with a reaction condition of a 9:1wt% ratio of citric acid anhydrous to sulfuric acid, temperature (80 °C), and reaction time (5 h). The carboxyl functionalization of cellulose nanocrystals was affirmed through the conductometric titrimetric method and Fourier transform infrared spectroscopy. The conductometric titration showed a maximum carboxylate concentration of 0.75 ± 0.08 mmol/g; this gave the CNC stable dispersibility. Based on scanning electron microscopy characterization, mostly spherical-like shapes of carboxylated cellulose nanocrystals were obtained. The dynamic light scattering analysis showed that the particle possesses a particle size of 68.06 ± 1.05 nm with a maximum absolute value zeta potential of -33 mV. The x-ray diffraction analysis found cellulose crystallinity in the 60.37 to 81.3% range. The thermal gravimetric analysis showed that rapid mass loss occurred between 245 and 400 °C, with a maximum weight loss of 95%. Introducing the carboxylic group from citric acid anhydrous to cellulose can enhance the application of cellulose. Since the carboxylic groups are simultaneously introduced to the surface of cellulose during the hydrolysis process, it has the advantage of reducing the amount and chemical prices that cost for series and long-step surface functionalizing reactions. Citric acid could be easily recovered through a rotary evaporator, and since it is obtained from fruits, the carboxylic CNC formed has lower toxic risks. These environmentally friendly, sustainable, and nontoxic properties gave the produced carboxylic CNC high potential application for the production of biofilms, food packaging material, UV protection, drug delivery, and new bio-based nanomaterials.

energy & fuels,engineering, chemical
Preparation of Cu-modified bacterial cellulose aerogels derived from nata de coco towards the enhanced adsorption of hydrophobic organic solvents

Hanh H. M. Nguyen,Khang V. M. Tan,Thanh T. T. Van,Hanh N. Nguyen,Anh N. Q. Phan,An T. T. Tran,Phung K. Le,Kien A. Le,Khoa D. Nguyen,Ha V. Le

DOI: https://doi.org/10.1007/s10934-022-01413-z

2022-12-25

Journal of Porous Materials

Abstract:This study presented a simple and eco-friendly method to load copper nanoparticles on the surface of bacterial cellulose from nata de coco produced via the fermentation of coconut water by Acetobacter xylinum . The Cu modification of BC surface was based on the reduction of copper (II) acetate by hydrazine under ambient conditions in a dispersion system of Nata de coco in water, which was followed by freeze-drying, affording lightweight Cu-containing cellulose aerogels. The structural features of the obtained aerogels were investigated by scanning electron microscopy with energy dispersive X-ray analysis (SEM/EDX), thermogravimetric analysis (TGA), powder X-ray diffraction (PXRD), and nitrogen physisorption, indicating the high cellulose crystallinity, three-dimensional matrix and homogenous dispersion of Cu species on the cellulose bundles. The Cu-modified aerogel exhibited a significantly improved adsorption capacity of cyclohexane (66.4 g/g) as compared to that of pure cellulose (45 g/g). The excellent performances of 65.1–109.6 g/g were also observed for other water-insoluble liquids including n -hexane, toluene, tetrahydrofuran, ethyl acetate, chlorobenzene, 1,2-dichlorobenzene, dichloromethane, and chloroform depending their density.

materials science, multidisciplinary,chemistry, physical, applied

Ureteral ectopia

Isolation of D-aspartic acid beta-methyl ester from erythrocyte carboxyl methylated proteins.

Synthesis, Characterization, and Application of Carboxymethyl Cellulose from Asparagus Stalk End

Carboxymethyl cellulose with tailored degree of substitution obtained from bacterial cellulose

Sustainable Production of Carboxymethyl Cellulose: A Biopolymer Alternative from Sugarcane (Saccharum officinarum L.) Leaves

Synthesis of highly substituted carboxymethyl cellulose depending on cellulose particle size

Carboxymethylcellulose-Based Hydrogel Obtained from Bacterial Cellulose

Alkali induced changes in spatial distribution of functional groups in carboxymethylated cellulose

SYNTHESIS AND PROPERTIES OF CARBOXYMETHYL CELLULOSE FROM AGRICULTURAL WASTE – SUGARCANE LEAVES

Pre-treatment effect on the structure of bacterial cellulose from Nata de Coco (Acetobacter xylinum)

Production of Bacterial Cellulose in the Medium with Yeasts Pre-Fermented Coconut Water or with Addition of Selected Amino Acids

Covert visual spatial attention in boys with attention deficit hyperactivity disorder: Lateral effects, methylphenidate response and results for parents

Effects of Carboxymethyl Modification on the Acidic Polysaccharides from Calocybe indica: Physicochemical Properties, Antioxidant, Antitumor and Anticoagulant Activities

Enhanced Carboxymethyl Cellulose Based on Empty Fruit Bunches in a High Degree of Substitution and Thermal Stability as a Biocomposite Film Backbone

Carboxymethyl Cellulose Hydrogel from Biomass Waste of Oil Palm Empty Fruit Bunch Using Calcium Chloride as Crosslinking Agent

Synthesis of carboxymethyl cellulose from coconut fibers and its application as solid polymer electrolyte membranes

Preparation of Carboxymethylcellulose Sodium from Mild Liquefaction Residue of Woody Biomass

Bacterial Cellulose-Based Biofilm Forming Agent Extracted from Vietnamese Nata-de-Coco Tree by Ultrasonic Vibration Method: Structure and Properties

Effects of Raw Material Source on the Properties of CMC Composite Films

Preparation and characterization of carboxylated cellulose nanocrystals from Oxytenanthera abyssinica (Ethiopian lowland bamboo) cellulose via citric acid anhydrous hydrolysis catalyzed by sulfuric acid

Preparation of Cu-modified bacterial cellulose aerogels derived from nata de coco towards the enhanced adsorption of hydrophobic organic solvents