Abstract:Presently, the construction industry demands components that are exceptionally strong and long-lasting. The initial important construction material is concrete, which contains between 1 % and 2 % of air voids. The structural damage caused by water that enters through the air spaces are improved with filler material. Chemical filler materials are environmentally harmful; therefore, eco-friendly materials are selected for this study. The environmentally benign character of agro-waste byproduct usage is a driving factor in the field of research. Numerous uses can be found for waste materials, especially after they have been repurposed. We used a byproduct of an essential oil extraction company, an extract made from the leaves of lemon grass (Cymbopogan citrus), in our research. Alkalization, slow pyrolysis, acid hydrolysis, and bleaching are only some of the chemical treatments that could be used to easily extract microcrystalline cellulose from the discarded waste material. In our study the chemicals used are mild harmful to the environment and a surface reactant (linear alkyl benzene sulfonic acid) is utilised to bleach and purify the microcrystalline cellulose. Thermal analysis, scanning electron microscopy, transmission electron microscopy and Fourier transform spectroscopy were all used to learn more about the cellulose that had been extracted. The extracted cellulose powder comprises a high crystallinity index (68.14 %) and low crystallite size (5.13 nm) found using X-ray diffraction analysis. The smooth and porous surface is observable in scanning electron microscope analysis. The Differential scanning calorimeter curve shows the highest degradation temperature at 218.16 °C. The micro sized particles mostly range between 100 and 120 μm and are found using ImageJ. The surface roughness and permissible skewness of cellulose particles were examined using atomic force microscopy. The density of extracted cellulose is 1.092 g/cm3. The microcrystalline cellulose yield % was notably maximum (40.45 %). This cellulose was introduced in a M30 grade cement concrete as fillers up to 5 % by the weight of cement. The fresh and mechanical properties of the concrete was found to get improved with the addition of cellulose up to 3 %. As a result, the characteristics of cellulose boost its utility within the construction sector.

SYNTHESIS AND PROPERTIES OF CARBOXYMETHYL CELLULOSE FROM AGRICULTURAL WASTE – SUGARCANE LEAVES

Sustainable Production of Carboxymethyl Cellulose: A Biopolymer Alternative from Sugarcane (Saccharum officinarum L.) Leaves

Synthesis and Application of Photo-Active Carboxymethyl Cellulose Derivatives

Synthesis of highly substituted carboxymethyl cellulose depending on cellulose particle size

Carboxymethylcellulose production from sugarcane bagasse: A new approach in biorefinery concept

Preparation of food grade carboxymethyl cellulose from corn husk agrowaste

Isolation, Modification, and Characterization of Local Indonesia's Sugarcane Bagasse Cellulose for Dye‐Adsorbent Application

Optimization of reaction conditions for preparing carboxymethyl cellulose from sago waste

Carboxymethyl cellulose with tailored degree of substitution obtained from bacterial cellulose

Biodegradable carboxymethyl cellulose based material for sustainable packaging application

Synthesis, Characterization, and Application of Carboxymethyl Cellulose from Asparagus Stalk End

Preparation of Carboxymethylcellulose Sodium from Mild Liquefaction Residue of Woody Biomass

Ultrasonic-assisted synthesis for the production of green and sustainable hemp carboxymethyl cellulose

Waste Materials as a Resource for Production of CMC Superabsorbent Hydrogel for Sustainable Agriculture

Recent Developments of Carboxymethyl Cellulose

Effects of Carboxymethyl Modification on the Acidic Polysaccharides from Calocybe indica: Physicochemical Properties, Antioxidant, Antitumor and Anticoagulant Activities

Comprehensive characterization of microcrystalline cellulose from lemon grass (Cymbopogan citratus) oil extraction agro-industrial waste for cementitious composites applications

Carboxymethyl Bacterial Cellulose from Nata de Coco: Effects of NaOH

Synthesis and suitability characterization of microcrystalline cellulose from Citrus x sinensis sweet orange peel fruit waste-based biomass for polymer composite applications

Synthesis and characterization of seaweed cellulose derived carboxymethyl cellulose