New types of phase separation behavior during the crystallization process in polymer blends with phase diagram.

Tanaka,Nishi

DOI: https://doi.org/10.1103/PHYSREVLETT.55.1102

IF: 8.6

1985-09-02

Physical Review Letters

Abstract:

What problem does this paper attempt to address?

Asymmetric Molecular Dynamics and Anisotropic Phase Separation in the Cocrystal of the Crystalline/Crystalline Polymer Blend

Ying Zheng,Navin Kafle,Derek Schwarz,James M. Eagan,Shigetaka Hayano,Yuki Nakama,Pengju Pan,Toshikazu Miyoshi

DOI: https://doi.org/10.1021/acsmacrolett.1c00745

IF: 5.8

2022-01-01

ACS Macro Letters

Abstract:Semicrystalline polymers are categorized as either mobile or fixed crystals, depending on chain mobility in the crystalline region. In this work, we investigate molecular dynamics and phase structure in the cocrystal consisting of fixed and mobile polymer crystals by solid-state (ss) nuclear magnetic resonance (NMR) spectroscopy. It is demonstrated that (i) the mobile component begins large amplitude motions associated with crystal-crystal transition, while fixed ones keep their rigidity in the cocrystal, and (ii) asymmetric molecular dynamics leads to nanosegregations into mobile- and fixed-rich domains in the cocrystal below the melting temperature (Tm). The observed phase separation induced by asymmetric molecular dynamics is similar to the phase separation of the miscible amorphous polymer blend; however, it is limited to two dimensions due to the parallel packing of the stems inside the cocrystal, as well as chain connectivity at the crystalline-amorphous boundary.
Phase Separation and Crystallization of Binary Nanoparticles Induced by Polymer Brushes

Dong Zhang,Yangwei Jiang,Xiaohui Wen,Linxi Zhang

DOI: https://doi.org/10.1039/c2sm27123k

IF: 4.046

2013-01-01

Soft Matter

Abstract:The aggregation behaviors and phase separation of binary nanoparticles immersed in semiflexible polymer brushes are explored using molecular dynamics simulations. The conformations of the binary nanoparticle-brush mixtures are very sensitive to the size ratio q = sigma(l)/sigma(s) where sigma(l) and sigma(s) are the diameters for large and small nanoparticles, respectively, and the attractive interactions epsilon(M) between the nanoparticles and polymer brushes. The phase separation of the binary nanoparticles is observed at a relatively strong attractive interaction under the effects of inter-nanoparticle depletion attractions provided by polymer brushes. Furthermore, the crystallization of small nanoparticles occurs at a strong interaction and a hexagonal close-packed-like (hcp-like) ordered structure is formed. The present results may promise a new approach for controlling the self-assembling behavior of nanoparticles and constructing a better macroscopic performance of the material.
The Phase Behaviour of Single Polyethylene Chains with and Without Fixing One End

Su Jia-Ye,Zhang Lin-Xi

DOI: https://doi.org/10.1088/1674-1056/17/8/058

2008-01-01

Chinese Physics B

Abstract:The phase behaviour of a single polyethylene chain is studied by using molecular dynamics simulations. A free chain and a chain with fixing one end are considered here, since the atomic force microscope (AFM) tip can play a significant role in polymer crystallization in experiment. For a free chain, it is confirmed in our calculation that the polymer chain exhibits an extended coil state at high temperatures, collapses into a condensed state at low temperatures, i.e. the coil-to-globule transition that is determined by a high temperature shoulder of the heat capacity curve, and an additional liquid-to-solid transition that is described by a low temperature peak of the same heat curve. These results accord with previous studies of square-well chains and Lennard-Jones homopolymers. However, when one of the end monomers of the same chain is fixed the results become very different, and the chain cannot reach an extended coil-like state as a free chain does at high temperatures, i.e. there exists no coil-to-globule-like transition. These results may provide some insights into the influence of AFM tip when it is used to study the phase behaviour of polymer chains. If the interaction force between AFM tip and polymer monomers is strong, some monomers or one of them can be seen as being fixed by the tip, which is similar to our simulation model, and it is also found that AFM tip could induce polymer crystallization.
Rheological Behaviors and Structural Transitions in A Polyethersulfone-Modified Epoxy System During Phase Separation

Wenjun Gan,Guozhu Zhan,Minghai Wang,Yingfeng Yu,Yuanze Xu,Shanjun Li

DOI: https://doi.org/10.1007/s00396-007-1758-x

IF: 2.4

2007-01-01

Colloid & Polymer Science

Abstract:The rheological behaviors and gelation transitions in a polyethersulfone (PES)-modified epoxy system during phase separation were studied by rheometry, time-resolved light scattering, and differential scanning calorimetry. Two separate structural transitions in the curing process of the blend were identified as the first one because of phase separation and the second one related to cross-linking reaction of epoxy resin. Both the times of the two structural transition at different temperatures could be described well by the Arrhenius type equation. The complex viscosity exhibits an exponential growing process during phase separation at various temperatures, correlating to the light-scattering results. The exponential behavior of complex viscosity could be attributed to the viscoelastic flow of epoxy-rich escaping from PES-rich during phase separation process.
Interplay Between Two Phase Transitions: Crystallization and Liquid-Liquid Phase Separation in a Polyolefin Blend

Xiaohua Zhang,Zhigang Wang,Xia Dong,Dujin Wang,Charles C. Han

DOI: https://doi.org/10.1063/1.2208997

2006-01-01

Abstract:The interplay between liquid-liquid phase separation (LLPS) and crystallization at several compositions in statistical copolymer blends of poly(ethyleneco-hexene) and poly(ethylene-cobutene) has been examined by optical microscopy (OM), atomic force microscopy (AFM), and differential scanning calorimetry (DSC). The phase contrast optical microscopy shows interconnected bicontinuous structures for deeply quenched LLPS, characteristic of spinodal decomposition. After a second quench to a temperature below the melting point, an overwhelming change in crystallization kinetics has been clearly observed, which is caused by the increase of the nucleation rate assisted by concentration fluctuations due to the spontaneous spinodal LLPS. We propose a new mechanism of “fluctuation assisted nucleation” in the crystallization process for such interactive process in a blend system. The experimental results from OM, AFM, and DSC measurements at various conditions are all consistent with the fluctuation assisted nucleation model.
The Effect of Phase Separation on Crystal Nucleation Density and Lamella Growth in Near-Critical Polyolefin Blends

G Matsuba,K Shimizu,H Wang,ZG Wang,CC Han

DOI: https://doi.org/10.1016/j.polymer.2004.04.026

IF: 3.877

2004-01-01

Plasma Processes and Polymers

Abstract:We have studied the effect of liquid–liquid phase separation on crystallization in near-critical blends of poly(ethylene-co-hexene)/poly(ethylene-co-octene) and poly(ethylene-co-hexene)/poly(ethylene-co-butene) using optical microscopy and simultaneous small and wide angle X-ray scattering. Two quenching schemes were used in this study: (1) single-quench, a homogeneous melt quickly cooled to the crystallization temperature, and (2) double-quench, a homogeneous melt quickly cooled to an intermediate temperature, which allows for occurring phase separation but not crystallization, then to the crystallization temperature. We could found more crystalline nuclei in case of single-quench than of double-quench. The long spacing of lamellar crystals is approximately 20Å larger in single-quench than in double-quench, due primarily to the inclusion of more non-crystallizable components in the amorphous layers of lamellar stacks in the former. The degree of crystallinity is about three times higher in single-quench.
Competing Growth Kinetics in Simultaneously Crystallizing and Phase-Separating Polymer Blends

H Wang,K Shimizu,H Kim,Ek Hobbie,Zg Wang,Cc Han

DOI: https://doi.org/10.1063/1.1464537

2002-01-01

Abstract:The kinetic interplay between crystal superstructure growth and late-stage liquid phase coarsening in a polymer blend has been examined. By controlling the relative quench depths for liquid–liquid phase separation and crystallization, the growth kinetics of the characteristic length scales of the simultaneous ordering processes show a crossover from crystallization dominated to phase-separation dominated behavior. Based on a scaling argument for late-stage coarsening during spinodal decomposition, we argue that this kinetic crossover is inevitable in a blend for which the critical temperature of liquid–liquid phase separation is well above the equilibrium melting temperature of the blend.
Phase Behavior and Phase Separation in Blends of a Liquid Crystalline Polymer and an Amorphous Polymer Containing Hydrogen-Bonding Interaction

WJ Chen,J Wu,M Jiang

DOI: https://doi.org/10.1002/macp.1998.021990828

IF: 2.996

1998-01-01

Macromolecular Chemistry and Physics

Abstract:The phase behavior and thermally induced phase separation in blends of poly{styrene-co-[p-(2,2,2-trifluoro-1-hydroxy-1-trifluoromethyl)ethyl-α-methylstyrene]} (PS(OH)) and a thermotropic liquid crystalline polymer (LCP) were studied by optical microscopy (OM), infrared spectroscopy (IR) and time-resolved light scattering (TRLS). PS(OH) contains strong proton-donating groups —C(CF3)2OH, and the LCP is poly[p-(tert-butyl)phenylene fumarate] (PBPF), which is soluble in common solvents. For blends of PS(OH)/PBPF, the miscible region was found only at high PBPF compositions and low temperature due to intermolecular hydrogen bonding between —C(CF3)2OH groups of PS(OH) and the phenolic OH end-groups of PBPF according to IR. The PS(OH)/PBPF blend undergoes phase separation via spinodal decomposition (SD) during isothermal annealing in the two-phase regime of phase diagram. The SD yielded unique Vv and Hv scattering patterns, which can be attributed to regular periodic phase-separated structures composed of an anisotropic phase and an isotropic phase. Preliminary studies on the SD process by TRLS showed that the phase separation spontaneously occurs at a certain time, that might be associated with the presence of the LCP.
Phase Separation Kinetics And Pattern Formation And Selection In Polymer Systems

Yl Yang,F Qiu,P Tang,Hd Zhang

DOI: https://doi.org/10.3321/j.issn:1005-281X.2006.04.001

2006-01-01

Progress in chemistry

Abstract:Most of polymer blends are thermodynamic immiscible because of small entropy of mixing, forming unique spatial-temporal pattern. In this review, based on our recent work, we focus on the phase separation kinetics and corresponding pattern evolution of polymer system by using time dependent Ginzberg-Landau (TDGL) equation. The review contents cover the phase separation dynamics under shear for polymer blends and block copolymers, phase separation coupling with chemical reactions, and phase separation on the spherical surface. Also microphase separation dynamics of complex triblock copolymers is reviewed by means of the coupling between the TDGL and self-consistent field theory (SCFT), namely dynamic SCFT, which consider both the dynamics and the topological characteristic of the chain.
Phase-diagram for Irregular and Non-Symmetric Cross-linked Polymer Blends

Edilson Vargas,Marcia C. Barbosa

DOI: https://doi.org/10.1016/S0378-4371%2898%2900151-4

1997-12-17

Abstract:We consider here a blend made of two types of polymers, $A$ and $B$, of different chemical nature. At high temperature the homogeneous mixture is cross-linked. As the temperature is lowered, the two species try to segregate but are kept together by the cross-links. We show that for inhomogeneous, non-regular and non-permanent cross-links, there is a complete segregation at low temperatures if the system is just weakly cross-linked and partial segregation, otherwise. We also demonstrate that there is no phase transition between the homogeneous phase and the microphase for non-symmetric systems. Our analysis is checked with the experiment.

Condensed Matter
Frustrated Crystallization in the Coupled Viscoelastic Phase Separation

Weichao Shi,Xu-Ming Xie,Charles C. Han

DOI: https://doi.org/10.1021/ma301592a

IF: 5.5

2012-01-01

Macromolecules

Abstract:The interplay between crystallization and phase separation has been intensively studied recently. In this study, we extended the research into a dynamically asymmetric blend composed of amorphous poly(methyl methacrylate) (PMMA) and crystalline poly(ethylene oxide) (PEO). The large dynamic asymmetry induces network stress in concentration growth. We find that crystallization is seriously frustrated when it couples with a simultaneous viscoelastic phase separation. In a single quench experiment, normal spherulites grew in a limited temperature range when crystallization was faster, while crystallization was frustrated at deep quenches when phase separation was faster. In a double quench experiment, crystallization was more difficult to occur after the prior phase separation at a higher temperature. The calorimetric results indicated that both melting temperatures and enthalpies of crystallization decreased in the coupled viscoelastic phase separation. We propose that it is the network stress in the concentration growth that leads to the frustration of crystallization.
Rheology and Morphology of Phase-Separating Polymer Blends

ZL Zhang,HD Zhang,YL Yang,I Vinckier,HM Laun

DOI: https://doi.org/10.1021/ma000968f

IF: 5.5

2001-01-01

Macromolecules

Abstract:Simulations of phase separation under oscillatory shear flow have been performed based on the time-dependent Ginzburg-Landau (TDGL) equation. To calculate the stress tensor, the expression proposed by Kawasaki was used. The results of the simulations have been confronted directly with experimental results on a LCST blend of P alpha MSAN/PMMA to evaluate the potential of the simulations. The effect of quench depth, shear amplitude, and shear frequency on the morphology development as well as on the corresponding rheological properties has been investigated. The results show that the characteristic rheological behavior of phase-separating systems can be attributed to the interfacial relaxation, which is changing during the process of phase separation. The strength of the concentration fluctuations and the interfacial volume fraction are key factors determining the contribution of interfacial relaxation to the global rheological behavior of the blend. In the low frequency range, the oscillatory shear cannot affect the critical paint, but it can accelerate the coagulation and growth of the blend morphology. The simulations qualitatively agree with the experimental findings.
Abnormal Excretion of Corticosteroid Sulphates in Patients with Breast Cancer

P. C. Ghosh,E. Lockwood,G. Pennington

DOI: https://doi.org/10.1136/bmj.1.5849.328

1973-02-10

British Medical Journal

Abstract:In a preliminary study, the 24-hour urinary excretion of corticosteroid sulphates and free cortisol have been measured in a group of patients with breast cancer and compared with the excretion of the same compounds in a group of normal women of similar age. Excretion of corticosteroid sulphates in the breast cancer group was found to be markedly raised. In a small number of patients with localized cancer of sites other than the breast the level of corticosteroid sulphate was not raised. If proved metastases were present a noticeable rise was observed.
Miscibility Phase Diagram of Ring Polymer Blends: A Topological Effect

Takahiro Sakaue,Chihiro H. Nakajima

DOI: https://doi.org/10.1103/PhysRevE.93.042502

2016-04-07

Abstract:The miscibility of polymer blends, a classical problem in polymer science, may be altered, if one or both of the component do not have chain ends. Based on the idea of {\it topological volume}, we propose a mean-field theory to clarify how the topological constraints in ring polymers affect the phase behavior of the blends. While the large enhancement of the miscibility is expected for ring-linear polymer blends, the opposite trend toward demixing, albeit comparatively weak, is predicted for ring-ring polymer blends. Scaling formulas for the shift of critical point for both cases are derived. We discuss the valid range of the present theory, and the crossover to the linear polymer blends behaviors, which is expected for short chains. These analysis put forward a view that the topological constraints could be represented as an effective excluded-volume effects, in which the topological length plays a role of the screening factor.

Soft Condensed Matter,Statistical Mechanics
Dissipative Particle Dynamics Simulation for Reaction-Induced Phase Separation of Thermoset/Thermoplastic Blends

Yoshiaki Kawagoe,Gota Kikugawa,Keiichi Shirasu,Yuuki Kinugawa,Tomonaga Okabe

DOI: https://doi.org/10.1021/acs.jpcb.3c07756

IF: 3.466

2024-02-20

The Journal of Physical Chemistry B

Abstract:Reaction-induced phase separation occurs during the curing reaction when a thermoplastic resin is dissolved in a thermoset resin, which enables toughening of the thermoset resin. As resin properties vary significantly depending on the morphology of the phase-separated structure, controlling the morphology formation is of critical importance. Reaction-induced phase separation is a phenomenon that ranges from the chemical reaction scale to the mesoscale dynamics of polymer molecules. In this...

chemistry, physical
Crystallization and phase separation kinetics in blends of linear low-density polyethylene copolymers

Katsumi Shimizu,Howard Wang,Zhigang Wang,Go Matsuba,Hongdoo Kim,Charles C. Han

DOI: https://doi.org/10.1016/j.polymer.2004.08.038

IF: 4.6

2004-01-01

Polymer

Abstract:We have systematically studied the crystallization and liquid–liquid phase separation (LLPS) kinetics in statistical copolymer blends of poly(ethylene-co-hexene) (PEH) and poly(ethylene-co-butene) (PEB) using primarily optical microscopy. The PEH/PEB blends exhibit upper critical solution temperature (UCST) in the melt and crystallization temperature below the UCST. The time evolution of the characteristic morphology for both crystallization and LLPS is recorded for blends at various compositions and following a quench from initial homogenous melts at high temperature to various lower temperatures. The crystallization kinetics is measured as the linear growth rate of the super structural crystals, whereas the LLPS kinetics is measured as the linear growth rate of the characteristic length of the late-stage spinodal decomposition. The composition dependence crystallization kinetics, G, shows very different characteristics at low and high isothermal crystallization temperature. Below 116°C, G decreases with increasing PEB content in the blend, implying primarily the composition effect on materials transport; whereas at above 116°C, G shows a minimum at about the critical composition for LLPS, implying the influence of the LLPS. On the other hand, LLPS kinetics at 130°C is relatively invariant at different compositions in the two-phase regime. The length scale at which domains are kinetically pinned, however, depends strongly on the composition. In a blend near critical composition, a kinetics crossover is shown to separate the crystallization dominant and phase separation dominant morphology as isothermal temperature increases.
EFFECT OF PHASE SEPARATION ON DYNAMIC VISCOELASTICITY OF POLY (METHYL METHACRYLATE)/POLY (Α-Methylstyrene-co-acrylonitrile) BLENDS

O Araki,Q Zheng,M Takahashi,T Takigawa,T Masuda

DOI: https://doi.org/10.2472/jsms.44.504appendix_144

1995-01-01

Abstract:Blends of Poly(methyl methacrylate) (PMMA) and poly(alpha-methylstyrene-co-acrylonitrile) (alpha MSAN) exhibit an LCST behavior and are miscible at lower temperatures than the cloud points. The temperature dispersion of dynamic viscoelasticity of the blend system was measured in the single-phase and phase-separated states. It was found that some thermal histories during sample preparation bring the structural equilibrium to PMMA and alpha MSAN. Such a thermal condition was used for all the measurements to attain the experimental reproducibility. Temperature dispersion curves of dynamic viscoelastic functions, E', E '' and tan delta, for the blends in single-phase and phase-separated cases located between those of PMMA and alpha MSAN in order of the component ratio. The shapes of the curves of phase-separated blends, however, become quite different from those of single-phase ones at temperatures above 80 degrees C. The curves of E' and tan delta of blend samples in phase-separation show the broad relaxation and locate close to those of the rich component. Correspondingly, the peaks of the E '' curves of phase-separated samples become broader than those for single-phase. Only the PMMA/alpha MSAN(40/60) blend in a phase-separated state shows two peaks on the E '' curve when it was annealed at 200 degrees C. These two peaks become more apparent with the annealing time suggesting the phase separation proceeds.
Phase Diagram of a Nearly Isorefractive Polyolefin Blend

H Wang,K Shimizu,EK Hobbie,ZG Wang,JC Meredith,A Karim,EJ Amis,BS Hsiao,ET Hsieh,CC Han

DOI: https://doi.org/10.1021/ma010900f

IF: 5.5

2001-01-01

Macromolecules

Abstract:The phase diagram of coexisting liquid−liquid phase separation (LLPS) and crystallization in nearly isorefractive blends of statistical ethylene/hexane (PEH) and ethylene/butene (PEB) copolymers has been investigated. A variety of techniques that exploit crystallization-induced contrast, such as diffuse light scattering, small-angle light scattering, light transmission, atomic force microscopy, and differential scanning calorimetry, are used to identify the LLPS boundary, which is found to exhibit an upper critical solution temperature of 146 °C. The composition dependence of the LLPS boundary follows the prediction of Flory−Huggins theory for binary polymer mixtures. The equilibrium melting temperature of the blends decreases with increasing PEB concentration in the miscible phase, whereas it remains relatively constant at 127 °C within the LLPS coexistence region. Measurements of the LLPS boundary can be complicated by heterogeneity in the polymer microstructure.
Investigation on Phase Separation Kinetics of Polyolefin Blends Through Combination of Viscoelasticity and Morphology.

Yanhua Niu,Liang Yang,Katsumi Shimizu,Jai A. Pathak,Howard Wang,Zhigang Wang

DOI: https://doi.org/10.1021/jp901209b

IF: 3.466

2009-01-01

The Journal of Physical Chemistry B

Abstract:Phase separation kinetics of polyethylene copolymer blends polyethylene-co-hexene (PEH)/polyethylene-co-butene (PEB) at a phase separation temperature of 130 degrees C have been investigated through the combination of rheological measurements and optical microscope observation. When the blends are located in the unstable region, i.e., PEH/PEB 40/60 blend (H40), 50/50 blend (H50), and 60/40 blend (H60), due to the coeffect of the fast decay of concentration fluctuations and the reduced interfacial area, the stroage modulus, G', behaves dramatically, decreasing at the early or intermediate stages; while when the blends are located in the metastable region, i.e., PEH/PEB 70/30 blend (H70), G' decreases slightly and slowly during the whole time sweep process. During the cyclic frequency sweeps, G' evolutions of H50 and H70 show similar trends. Obviously different from the strong phase segregation systems, the increase of G' with time in the metastable region has not been observed, possibly due to the entanglement effects and weak interaction between the components of polyethylene blends. The interfacial tension-driven or diffusion-limited morphological evolutions of H50 and H70 during phase separation give direct interpretations to the viscoelastic difference between the two blends, which is dominated by different phase separation kinetics. The relatively low interfacial tensions at the late stage of phase separation for H50 (0.5-0.38 mN/m varying with time) and H70 (1.2 mN/m) can be estimated by using the Gramespacher-Meissner model.
Composition Heterogeneity Induced Crystallization in Double Crystalline Binary Polymer Blends

Ashok Kumar Dasmahapatra

DOI: https://doi.org/10.48550/arXiv.1610.03681

2016-10-12

Abstract:Polymer blends offer an exciting material for various potential applications due to their tunable properties by varying constituting components and their relative composition. Our simulation results unravel an intrinsic relationship between the phase behavior and crystallization characteristics with the relative composition of A- and B-polymer in the system. We report simulation results for non-isothermal and isothermal crystallization with weak and strong segregation strength to elucidate the composition dependent crystallization behavior. With increasing composition of low melting B-polymer, macrophase separation and crystallization temperature changes non-monotonically, which is attributed to the change in diffusivity of both the polymers with increasing composition of B-polymer. In weak segregation strength, however, at high enough composition of B-polymer, A-polymer yields relatively thicker crystals, which is attributed to the dilution effect exhibited by B-polymer. When B-polymer composition is high enough, it acts like a solvent while A-polymer crystallizes. Under this situation, A-polymer segments become more mobile and less facile to crystallize. As a result, A-polymer crystallizes at a relative low temperature with the formation of thicker crystals. At strong segregation strength, dilution effect is accompanied with the strong A-B repulsive interaction, which is reflected in non-monotonic trend of mean square radius of gyration with increasing composition of B-polymer. Isothermal crystallization reveals a strong relationship between composition and crystallization behavior. Two-step (viz., sequential crystallization) yields better crystals than one-step (viz., coincident crystallization) for both the polymers.

Soft Condensed Matter

New types of phase separation behavior during the crystallization process in polymer blends with phase diagram.

Asymmetric Molecular Dynamics and Anisotropic Phase Separation in the Cocrystal of the Crystalline/Crystalline Polymer Blend

Phase Separation and Crystallization of Binary Nanoparticles Induced by Polymer Brushes

The Phase Behaviour of Single Polyethylene Chains with and Without Fixing One End

Rheological Behaviors and Structural Transitions in A Polyethersulfone-Modified Epoxy System During Phase Separation

Interplay Between Two Phase Transitions: Crystallization and Liquid-Liquid Phase Separation in a Polyolefin Blend

The Effect of Phase Separation on Crystal Nucleation Density and Lamella Growth in Near-Critical Polyolefin Blends

Competing Growth Kinetics in Simultaneously Crystallizing and Phase-Separating Polymer Blends

Phase Behavior and Phase Separation in Blends of a Liquid Crystalline Polymer and an Amorphous Polymer Containing Hydrogen-Bonding Interaction

Phase Separation Kinetics And Pattern Formation And Selection In Polymer Systems

Phase-diagram for Irregular and Non-Symmetric Cross-linked Polymer Blends

Frustrated Crystallization in the Coupled Viscoelastic Phase Separation

Rheology and Morphology of Phase-Separating Polymer Blends

Abnormal Excretion of Corticosteroid Sulphates in Patients with Breast Cancer

Miscibility Phase Diagram of Ring Polymer Blends: A Topological Effect

Dissipative Particle Dynamics Simulation for Reaction-Induced Phase Separation of Thermoset/Thermoplastic Blends

Crystallization and phase separation kinetics in blends of linear low-density polyethylene copolymers

EFFECT OF PHASE SEPARATION ON DYNAMIC VISCOELASTICITY OF POLY (METHYL METHACRYLATE)/POLY (Α-Methylstyrene-co-acrylonitrile) BLENDS

Phase Diagram of a Nearly Isorefractive Polyolefin Blend

Investigation on Phase Separation Kinetics of Polyolefin Blends Through Combination of Viscoelasticity and Morphology.

Composition Heterogeneity Induced Crystallization in Double Crystalline Binary Polymer Blends