Abstract:A series of polyethylene (PE) blends consisting of a linear high density polyethylene (HDPE) and a linear low density polyethylene (LLDPE) with an octane-chain branch density of 120/1000 carbon was prepared at different concentrations. The two components of this set of blends possessed isorefractive indices, thus, making it difficult to detect their liquid–liquid phase separation via scattering techniques. Above the experimentally observed melting temperature of HDPE, Tm = 133 °C, this series of blends can be considered to be in the liquid state. The LLDPE crystallization temperature was below 50 °C; therefore, above 80 °C and below the melting temperature of HDPE, a series of crystalline–amorphous PE blends could be created. A specifically designed two-step isothermal experimental procedure was utilized to monitor the liquid–liquid phase separation of this set of blends. The first step was to quench the system from temperatures of known miscibility and isothermally anneal them at a temperature higher than the equilibrium melting temperature of the HDPE for the purpose of allowing the phase morphology to develop from liquid–liquid phase separation. The second step was to quench the system to a temperature at which the HDPE could rapidly crystallize. The time for developing 50% of the total crystallinity (t1/2) was used to monitor the crystallization kinetics. Because phase separation results in HDPE-rich domains where the crystallization rates are increased, this technique provided an experimental measure to identify the binodal curve of the liquid–liquid phase separation for the system indicated by faster t1/2. The annealing temperature in the first step that exhibits an onset of the decrease in t1/2 is the temperature of the binodal point for that blend composition. In addition, the HDPE-rich domains crystallized to form spherulites which decorate the phase-separated morphology. Therefore, the crystal dispersion indicates whether the phase separation followed a nucleation-and-growth process or a spinodal decomposition process. These crystal-decorated morphologies enabled the spinodal curve to be experimentally determined for the first time in this set of blends.

Phase Behavior and Phase Separation in Blends of a Liquid Crystalline Polymer and an Amorphous Polymer Containing Hydrogen-Bonding Interaction

Blending Effects on Polymorphic Crystallization of Poly(l-lactide)

Phase Separation of Hydrophilic Monomer/Surfactant Aqueous Solution Studied by A Combined Light Scattering and Interference Approach

Interplay Between Two Phase Transitions: Crystallization and Liquid-Liquid Phase Separation in a Polyolefin Blend

Investigation on LCST behavior of a new amorphous/ crystalline polymer blend: Poly(n-methyl methacrylimide)/ poly(vinylidene fluoride)

Spinodal Decomposition Induced by Cross-Linking Reaction in A Binary Polymer Mixture

Phase Separation in Blends of Homopolymer and Graft Copolymer Based on Styrene and Butadiene

Investigation Of Phase Separation In A Partially Miscible Polymer Blend By Rheology

Phase Diagram of a Nearly Isorefractive Polyolefin Blend

Phase Separation Dynamics of A Poly(Vinyl Methyl Ether)/Polystyrene (pvme/ps) Blend Studied by Ultrafast Differential Scanning Calorimetry

A DSC Study of Miscibility and Phase Separation in Crystalline Polymer Blends of Phenolphthalein Poly(ether Ether Sulfone) and Poly(ethylene Oxide)

Study of Micro-Phase Separation of Two Polystyrene-Based Copolymer Mixture Using the Combination of PALS and FT-IR

Interplay Between Crystallization and Phase Separation in Ps-B-Pmma/Peo Blends: the Effect of Confinement

Liquid–liquid Phase Separation in a Polyethylene Blend Monitored by Crystallization Kinetics and Crystal-Decorated Phase Morphologies

Crystallization and phase separation kinetics in blends of linear low-density polyethylene copolymers

Molecular Dynamics and Phase Behavior of Polystyrene/Poly(vinyl Methyl Ether) Blend in the Presence of Nanosilica

Interplay of Crystallization and Liquid–liquid Phase Separation in Polyolefin Blends: A Thermal History Dependence Study

Liquid–liquid phase separation and its effect on the crystallization in polylactic acid/poly(ethylene glycol) blends

TIME AND TEMPERATURE DEPENDENCE OF PHASE-SEPARATION BEHAVIOR FOR POLY(N-METHYL METHACRYLIMIDE)/POLY(VINYLIDENCE FLUORIDE) BLENDS

Investigation on Phase Separation Kinetics of Polyolefin Blends Through Combination of Viscoelasticity and Morphology.

The effect of phase separation on crystallization of polyethylene/poly(ethylene-alt-propylene) blend