Polypyrrole-encapsulated metal oxide nanocomposite for adsorptive abatement of anionic dye from dye laden wastewater: Cost analysis and scale up design

Bibek Saha,Animesh Debnath,Biswajit Saha
DOI: https://doi.org/10.1016/j.mtcomm.2024.109061
IF: 3.8
2024-05-10
Materials Today Communications
Abstract:The present work demonstrates the fabrication of an organometallic material i.e. polypyrrole-encapsulated zinc oxide (PPy@ZnO) nanocomposite for adsorptive elimination of Eriochrome black-T (EBT) dye from water. The specific surface area and pore volume of the PPy@ZnO nanocomposite were observed to be 28.726 m 2 /g and 0.086 cc/g, respectively. At optimum experimental conditions of solution pH; 4.0, PPy@ZnO nanocomposite dose: 1.0 g/L, contact time: 30 min and initial EBT dye concentration: 50 mg/L, maximum EBT dye removal efficiency of ∼94±1.86% was obtained. The pseudo-second-order kinetic and Langmuir isotherm model provides the best fit for the adsorption experiments, with maximum EBT dye adsorption capacity of 277.78 mg/g. The prominent adsorption mechanisms include the hydrogen bonding, π–π interactions, and electrostatic attraction. The adsorption study is spontaneous (ΔG° 0, ΔS° > 0) in nature as indicated by the thermodynamics study. The reduction in EBT dye removal efficiency was insignificant (∼10±0.94%) in surface water as compared to other real water samples. Monovalent anions (i.e., NO 3 – and Cl – ) have minimal impact on EBT removal efficiency with reduction in removal efficiencies in the range of 4.0±1.54% to ∼11.0±1.93%. Regeneration study suggests an overall ∼20±1.45% decrease in the EBT dye removal efficiency after 5th cycle of regeneration. Response surface methodology suggests the maximum adsorption efficacy of 95±1.68% at initial EBT dye concentration of 35 mg/L, PPy@ZnO dose of 0.85 g/L and contact time of 40 min. The estimated synthesis cost of PPy@ZnO nanocomposite was determined to be ∼117 USD/kg. Batch mode scale-up design suggests a minimum of 87.48 g of PPy@ZnO nanocomposite needs to be applied to treat 50 mg/L of EBT dye loaded wastewater (50 L volume) with 95% dye removal efficiency.
materials science, multidisciplinary
What problem does this paper attempt to address?