Abstract:In the present investigation a novel, environmentally affable and economical, modified gellan gum nanocomposite (MAA-g-GG/Ppy/MMT) was fabricated via free-radical polymerization for the liquid-phase mitigation of Methylene blue (MB) and Malachite green (MG) dyes. The innovation of this work is substantiated by the intentional combination of diverse materials, the strategic incorporation of polypyrrole for enhanced adsorption, and the thoughtful addition of MMT as a nanofiller to address mechanical strength and improve adsorption capacity. The physico-chemical facets of MAA-g-GG/Ppy/MMT and its interaction with the dye molecules were elucidated using FT-IR, SEM-EDX, BET, TEM, and XRD techniques. The optimum conditions for the sorption of MB and MG were deemed to be dosage (1.2 g/L for both dyes), contact time (50 min for both dyes), initial MG/MB concentration (MB = 40 mg/L & MG = 30 mg/L), and pH (MB = 10 & MG = 7). The Freundlich isotherm was identified as the most suitable model, as evidenced by the highest R 2 value (∼0.999), indicating multilayer adsorption. The pseudo second-order model appraised the kinetic data. Thermodynamic findings revealed the adsorption process to be spontaneous, viable and exothermic which was ascertained by negative ∆H ⸰ values (−22.8 kJ/mol for MB and −18.3 kJ/mol for MG). The substantial Langmuir adsorption capacity ( Q m : MG =185.185; MB = 344.827) can be ascribed to the reason for strong interactions between MAA-g-GG/Ppy/MMT and dyes. The high reliability of MAA-g-GG/Ppy/MMT was determined by the regeneration studies that worked up to four cycles for both dyes. The real water (distilled water, tap water, and river water) samples spiked with MG/MB demonstrated a substantial uptake of dyes (>85 %) and the marginal influence of ionic strength on the adsorptive potential of MAA-g-GG/Ppy/MMT validated its efficacy for the decontamination of real effluents. The forces of attraction between the dyes and MAA-g-GG/Ppy/MMT included van der Waals, electrostatic forces of attraction, and π-π interaction. This green, economical, and viable MAA-g-GG/Ppy/MMT will prove to be an efficient adsorbent for the decontamination process of sequestration of dyes to achieve a sustainable environment.

Adsorptive Avidity of Prussian blue Polypyrrole Nanocomposite for Elimination of Water Contaminants: a Case study of Malachite Green and Isoniazid

Hollow Polyaniline Microsphere/MnO2/Fe3O4 Nanocomposites in Adsorptive Removal of Toxic Dyes from Contaminated Water

Biosynthesis and Analytical Characterization of Iron Oxide Nanobiocomposite for In-Depth Adsorption Strategy for the Removal of Toxic Metals from Drinking Water

Synergism between Polyethyleneimine, Graphene Oxide, and MgFeAl-Layered Triple Hydroxide in Removing Acid Red 1 dye and Bisphenol A from Contaminated Water Samples

Preparation and performance of novel bio-nanocomposite ZnMg@PH for the removal of hazardous brilliant green, crystal violet, and diclofenac sodium

Polypyrrole-functionalized magnetic Bi2MoO6 nanocomposites as a fast, efficient and reusable adsorbent for removal of ketoprofen and indomethacin from aqueous solution

Rational design of CdS-enwrapped polypyrrole nanoparticles for wastewater treatment: removal of hazardous pollutants in aqueous solutions

Removal of pyrene and benzo(a)pyrene micropollutant from water via adsorption by green synthesized iron oxide nanoparticles

An innovative diatomite-polypyrrole composite for highly efficient Cr (VI) removal through optimized adsorption via surface response methodology

Facile one-pot synthesis of a waste copper phthalocyanine-derived nanocomposite for efficiently removing dyes from wastewater

Efficiency of Poly(m-Aminophenol) as a Novel Adsorbent for Individual/Simultaneous Removal of Organic Dyes and Hexavalent Chromium from Water Sources

Appraisal of the adsorption potential of novel modified gellan gum nanocomposite for the confiscation of methylene blue and malachite green

Evaluation, optimization study, and life cycle assessment of novel eco-friendly PVA-based nanocomposite hydrogel adsorbents for methylene blue and paracetamol removal

Efficient adsorptive removal of paracetamol and thiazolyl blue from polluted water onto biosynthesized copper oxide nanoparticles

Transformation of waste into valuable materials: Utilizing waste printer powder to remove hazardous organic dye and pharmaceutical pollutants from wastewater

Multitasking needle-shaped copper oxide nanorods decorated cystine modified polymer/graphene oxide nanocomposite for 4-nitrophenol reduction, dye degradation, and textile effluent treatment

Iron-rich coal fly ash-polydopamine-silver nanocomposite (IRCFA-PDA-Ag NPs): tailored material for remediation of methylene blue dye from aqueous solution

Conductive Polymers and Their Nanocomposites as Adsorbents in Environmental Applications

Highly efficient hydrophobic nanocomposite in the decontamination of micropollutants and bacteria from aqueous wastes: A sustainable approach

An innovative "Up-and-Down" adsorption processes for pyrene removal from acid wastewater as new approach in water remediation

Polypyrrole-encapsulated metal oxide nanocomposite for adsorptive abatement of anionic dye from dye laden wastewater: Cost analysis and scale up design