Abstract:This research work aimed to isolate and culture the bacterium Bacillus paramycoides for biogenic fabrication of zinc oxide nanoparticles, specifically ZnO and ZnO-ME nanoparticles (nanoparticles fabricated from bacterial extracts only – ZnO, and from bacterial cell mass including extract – ZnO-ME). SEM investigation revealed the spherical-shaped NPs with 22.33 and 39 nm in size for ZnO and ZnO-ME, respectively. The Brunauer, Emmett, and Teller (BET) studies revealed mesoporous structure with pore diameters of 13.839 and 13.88 nm and surface area of 7.617 and 33.635 m 2 /gm for ZnO and ZnO-ME, respectively. Various parameters for the adsorption of sulfur black dye onto both ZnO and ZnO-ME were screened and optimized using Plackett–Burman Design (PBD), Full Factorial Design (FFD) and Central Composite Design (CCD). The results of the optimization modeling study revealed that FFD yielded the most predictable and best-fitting results among all the models studied, with R 2 values of 0.998 for ZnO and 0.993 for ZnO-ME. Notably, ZnO-ME exhibited a greater dye removal efficiency 80% than ZnO i.e., 71%, it may be due to the presence of amorphous carbon on the surface of ZnO-ME. Among the various isothermal models, the Freundlich model displayed the strongest correlation with the dye removal data, confirming the multilayer adsorption of dye on both nanoparticles and supporting physisorption. Therefore, ZnO and ZnO-ME nanoparticles have been proven as potential tools for mitigating environmental impacts associated with dye-containing wastewater.

What problem does this paper attempt to address?

This paper aims to solve the problem of industrial wastewater pollution caused by sulfur - black dyes. Specifically, the research work mainly focuses on the following aspects: 1. **Bacterial synthesis and characterization**: Biosynthesize zinc oxide nanoparticles (ZnO) and their composites (ZnO - ME) by isolating and culturing bacteria (Bacillus paramycoides). Use a variety of techniques such as X - ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), ultraviolet - visible spectroscopy (UV - VIS), field - emission scanning electron microscopy (FE - SEM), energy - dispersive X - ray spectroscopy (EDX) and Brunauer - Emmett - Teller (BET) analysis to characterize these nanoparticles in detail. 2. **Optimization of adsorption performance**: In order to improve the removal efficiency of sulfur - black dyes, researchers used Plackett - Burman Design (PBD), full - factor design (Full Factorial Design, FFD) and central - composite design (Central Composite Design, CCD) to screen and optimize various parameters affecting the adsorption effect. The results show that the FFD model has the highest predictability and the best fit among all the studied models, with R² values of 0.998 (ZnO) and 0.993 (ZnO - ME) respectively. 3. **Analysis of adsorption isotherms**: Further understand the adsorption process through Freundlich, Langmuir and Temkin isotherm models. The experimental results show that the Freundlich model has the strongest correlation with the adsorption data, indicating that the multi - layer adsorption mechanism and physical adsorption play important roles in this process. 4. **Application prospects**: Research shows that ZnO - ME nanoparticles exhibit a higher dye - removal efficiency (80%), while the removal efficiency of ZnO nanoparticles is 71%. This may be due to the presence of amorphous carbon on the surface of ZnO - ME. Therefore, these two nanomaterials are proven to be potential tools for effectively treating dye - containing wastewater. In summary, this paper attempts to develop new biosynthetic zinc oxide nanomaterials, optimize their adsorption performance, and deeply explore the adsorption mechanism, thereby providing an efficient and environmentally - friendly technical solution for solving dye pollution in industrial wastewater.

Biogenic engineered zinc oxide nanoparticle for sulfur black dye removal from contaminated wastewater: comparative optimization, simulation modeling, and isotherms

Zinc Oxide Nanoparticles and Their Application in Adsorption of Toxic Dye from Aqueous Solution

Decolorisation of textile wastewater using biosynthesised iron oxide nanomaterials and Optimisation by Response Surface Methodology

Biogenic synthesis of copper oxide nanoparticles using a cold tolerant bacterium for RB5/DR23 Azo dye adsorption

Effective adsorption and removal of industrial dye from aqueous solution using mesoporous zinc oxide nanoparticles via metal organic frame work: equilibrium, kinetics and thermodynamic studies

Synthesis of zinc oxide semiconductor nanoparticles using natural extract: a systematic evaluation of cationic dye photodegradation influenced by extract concentration, catalyst dose, and pH

Nanobioremediation: a bacterial consortium-zinc oxide nanoparticle-based approach for the removal of methylene blue dye from wastewater

Green Synthesis of Zinc Oxide Nanoparticles (ZnO NPs) for Effective Degradation of Dye, Polyethylene and Antibacterial Performance in Waste Water Treatment

Nano-zinc oxide fibers: Synthesis, characterization, adsorption of acid blue 92 dye, isotherms, thermodynamics and kinetics

Surface functionalized silver-doped ZnO nanocatalyst: a sustainable cooperative catalytic, photocatalytic and antibacterial platform for waste treatment

Biogenic ZnO nanoparticles: a study of blueshift of optical band gap and photocatalytic degradation of reactive yellow 186 dye under direct sunlight

Nanozinc ferrites @ silica as efficient adsorbent for dye removal from wastewater: synthesis and adsorption studies

Hydrothermal Synthesis of Zinc Silicate Nanomaterials for Organic Dyes Removal from Aqueous Solutions

Environmental remediation of real textile dyeing wastewater under visible light and inactivation of pathogenic bacteria using ZnO/CuO nano‐needles

Chemical synthesis of ZnO, CuO, MnO and FeO Nano adsorbent and their application in anionic reactive blue turquoise 71 dye (RB-71 dye) and real effluents remediation: Batch adsorption and column studies

Deep eutectic solvent mediated synthesis of ZnO nanoparticles and their catalytic activity for the removal of hazardous organic dyes

Mushroom and silk sericin extract mediated ZnO nanoparticles for removal of organic pollutants and microorganisms

Effective removal of textile dye via synergy of adsorption and photocatalysis over ZnS nanoparticles: Synthesis, modeling, and mechanism

Process optimization of superior biosorption capacity of biogenic oyster shells nanoparticles for Congo red and Bromothymol blue dyes removal from aqueous solution: Response surface methodology, equilibrium isotherm, kinetic, and reusability studies

Dendritic Filamentary Bi7O9I3 Modified with ZnO for Green Removal of Organic Dyes Compounds

Synthesis of Zinc Oxide, Ferric, Cu Nano Particles by Almond Shells, Sugar Cane Bagasse, Eggshells, and Their Application as Catalyst for Dye Reactive Red 195 (RR 195) Removal