Abstract:Utilization of agricultural waste such as nonedible seed oil for the synthesis of biodiesel via catalytic transesterification is one of the effective ways for the partial replacement of petroleum-based fuels in the area of renewable energy development and is beneficial to CO, CO2, and unburned hydrocarbon (HC) emission reduction to the environment. In this regard, the current study investigates the synthesis of fatty acid methyl esters (FAMEs) from Croton macrostachyus kernel oil by considering parameter interaction and optimization to maximize the yield of fatty acid methyl esters (FAMEs). The response surface methodology-central composite design (RSM-CCD) was applied to optimize the C. macrostachyus fatty acid methyl ester (CMKO-FAME) synthesis process by varying the process parameters such as reaction time (1-2 h), molar ratio (6:1-12:1), and catalyst loading (1-2 wt %). The optimum conditions for the transesterification of C. macrostachyus kernel oil (CMKO) were found to be a methanol to oil ratio of 11.98:1, catalyst loading of 1.03 wt %, and reaction time of 2 h, resulting in the conversion of 95.03 wt % C. macrostachyus kernel oil into its mono FAMEs. The fuel properties of CMKO and its FAMEs were determined based on ASTM D6751 and EN 14214 standards. Further, the CMKO and its FAMEs were characterized using Fourier transform infrared (FT-IR), gas chromatography-mass spectrometry (GC-MS), and nuclear magnetic resonance spectroscopy (NMR). The fatty acid composition of CMKO was myristic acid (1.36%), palmitic acid (11.35%), stearic acid (5.11%), oleic acid (18.64%), gadoleic acid (0.34%), linoleic acid (49.084%), and linolenic acid (14.1%). The purity of the produced methyl esters was determined by 1H NMR and found to be 95.52%, which was quite in good agreement with the experimentally observed yield of 95.39 wt %. The produced CMKO-FAME was blended with diesel fuel at various ratios (B5, B10, B15, and B20) to evaluate the engine performance and emission characteristics in a diesel engine. The engine brake thermal efficiency is lower, the brake-specific fuel consumption (BSFC) using CMKO-FAME blends is higher, and the temperature of exhaust gas emitted after combustion also increased as compared to diesel fuel. Similarly, using produced FAME blends, the emission emitted such as HC, NOx, and CO is reduced. However, the engine fueled with the produced FAME blends increased the level of CO2 into the atmosphere when compared to diesel fuel. The performance and emission characteristics of diesel engine result show that the blend of CMKO-FAME and diesel can be used as a fuel in a diesel engine without any modification of the engine.

Synthesis of bio-oil from waste Trichosanthes cucumerina seeds: a substitute for conventional fuel

Harnessing the Carrier Solvent Complexity of Crop Biostimulant Liquid Formulations Using Locally Available Transesterified Waste Cooking Oil: Economic Recycling, Solvent Performance, and Bioefficacy Evaluation

Utilization of waste seed oil from Cestrum nocturnum as a novel source for cleaner production of biodiesel using green nano-catalyst of antimony oxide

Evaluation of seed oil from Hura crepitans, Trichosanthes cucumerina and Thevetia nerifolia

An experimental study on transesterification process and emission analysis of diesel engine propelled with Capparis spinosa biodiesel

Synthesis of Fatty Acid Methyl Ester from Croton macrostachyus (Bisana) Kernel Oil: Parameter Optimization, Engine Performance, and Emission Characteristics for Croton macrostachyus Kernel Oil Fatty Acid Methyl Ester Blend with Mineral Diesel Fuel

Sustainable and Green Production of Biodiesel from Calotropis procera Seed Oil Using CuO Nanocatalyst

Emission and performance analysis of thermochemical conversion of bio-oil using waste animal fat

Development of Sustainable Biofuel from Seed Waste Using Pyrolysis and Its Sustainability in the Compression Ignition Engine Application

Bio-oil production and catalytic upgrade to value added product: A review on recent technologies

Optimised transesterification of used frying oils: production and characterisation of biodiesel

Wasted Pomegranates as a potential and novel third-generation feedstock: optimization, characterization, and thermogravimetric investigation

Improvement of waste frying oil/cottonseed oil-based biodiesel properties by adjusting unsaturation and its effect on engine emission characteristics

Thevetia peruviana Seed Oil Transesterification for Biodiesel Production: An Optimization Study

Transesterification and Reactive Extraction of Castor Oil for synthesis of Biodiesel/Biolubricant

Extraction and Quality Evaluation of Biodiesel from Six Familiar Non-Edible Plants Seeds

Cavitation-assisted synthesis and chracterization of a novel catalyst from waste coconut trunk biomass for biodiesel production

Salvia farinacea seed oil, a potential biomass for synthesis of biodiesel: A critical analysis of its fuel properties.

Feasibility Study of Biodiesel Synthesis from Waste Ayurvedic Oil: Its Evaluation of Engine Performance, Emission and Combustion Characteristics

BIODIESEL SYNTHESIS OF COTTON SEEDS OIL (CEIBAPENTANDRA) BY CHEMICALLY TRANSESTERIFICATION PROCESS AND ION FRAGMENTATION OF METHYL ESTER

Microwave-assisted synthesis of trimethylolpropane triester (bio-lubricant) from camelina oil