Abstract:Isothermal forging stands as an effective technology for the production of large-scale titanium alloy multi-rib components. However, challenges have persisted, including die underfilling and strain concentration due to the complex material flow and heterogeneous deformation within the forging die cavity. While approaches centered on optimized billet designs have mitigated these challenges, uncertainties in process parameters continue to introduce unacceptable variations in forming accuracy and stability. To tackle this issue, this study introduced a multi-objective robust optimization approach for billet design, accounting for the multi-rib eigenstructure and potential uncertainties. The approach includes finite element (FE) modeling for analyzing the die-filling and strain inhomogeneity within the multi-rib eigenstructure. Furthermore, it integrated image acquisition perception and feed back technologies (IAPF) for real-time monitoring of material flow and filling sequences within die rib-grooves, validating the accuracy of the FE modeling. By incorporating dimensional parameters of the billet and uncertainty factors, including friction, draft angle, forming temperature, speed, and deviations in billet and die, quantitative analyses on the rib-groove filling and strain inhomogeneity with fluctuation were conducted. Subsequently, a dual-response surface model was developed for statistical analysis of the cavity filling and strain homogeneity. Finally, the robust optimization was processed using a non-dominated sorting genetic algorithm II (NSGA-II) and validated using the IAPF technologies. The proposed approach enables robust design enhancements for rib-groove filling and strain homogeneity in titanium alloy multi-rib components.

Height inhomogeneity in flow forming of thin-walled tubes with helical grid-stiffened ribs: characterization, mechanism and control method

Deformation Patterns in Hydroforming of Thin-Walled Y-Shaped Tube

Effect of Internal Pressure Distribution on Thickness Uniformity of Hydroforming Y-shaped Tube

Multi-pass rolling-extrusion of large-scale thin-walled square tube with longitudinal inner ribs

Research on Bending Forming Method of Large Diameter-Thickness Ratio Thin-Walled Tubes for Aerospace

Flow defects of rib-web components in isothermal local-loading forming process

Effects of preform on thickness distribution of hydroformed Y-shaped tube

Hot Gas Pressure Forming of Ti-55 High Temperature Titanium Alloy Tubular Component

Influence of Process Parameters on Thinning Ratio and Fittability of Bellows Hydroforming

Improvement of Formability in Parallel Double-Branched Tube Hydroforming Combined with Pre-Forming and Crushing Processes

Uncertainty analysis and robust design optimization for the heat-assisted bending of high-strength titanium tube

Influence of process parameters on the flow forming quality of thin-walled tube with large diameter-thickness ratio

Analysis of supercritical heat transfer in horizontal helical tube with internal roughness

Forming characteristics of thin-walled tubes manufactured by free bending process-based nontangential rotation bending die

Turbulent flow and heat transfer in a new type of internally torsion-ribbed helical tube

Combination of Taper and Hierarchy to Improve Crushing Efficiency of Thin-Walled Tubes

The Mechanism of Forming Hollow Shafts with Constant Wall Thickness by Three-Roll Skew Rolling

Effect of Internal Helical-Rib Roughness on Mixed Convection Flow and Heat Transfer in Heated Horizontal Pipe Flow of Supercritical Water

Enhancing the Robustness of Rib-Groove Filling and Strain Homogeneity in the Isothermal Forging of Titanium Alloy Multi-Rib Components

Material Flow in Infeed Rotary Swaging of Tubes

Numerical and experimental investigation on precision forming of ribbed tube by cold drawing process