Abstract:With the advancement of semiconductor manufacturing technology, thin film structures were widely used in MEMS devices. These films played critical roles in providing support, reinforcement, and insulation in MEMS devices. However, due to their microscopic dimensions, the sensitivity of their parameters and performance to thermal stress increased significantly. In this study, a Pirani gauge sample with a multilayer thin film structure was designed and fabricated. Based on this sample, finite element modeling analysis and thermal stress experiments were conducted. The finite element modeling analysis employed a combination of steady-state and transient methods to simulate the deformation and stress distribution of the device at room temperature (25 °C), low temperature (−55 °C), and high temperature (125 °C). The thermal stress test involved placing the sample in a temperature cycling chamber for temperature cycling tests. After the tests, the resonant frequency and surface deformation of the device were measured to quantitatively evaluate the impact of thermal stress on the deformation and resonant frequency parameters of the device. After the experiments, it was found that the clamped-end beams made of Pt were a stress concentration area. Additionally, the repetitive thermal load caused the cantilever beam to move cyclically in the Z direction. This movement altered the deformation of the film and the resonant frequency. The suspended film exhibited concavity, and the overall trend of the resonant frequency was downward. Over time, this could even lead to the fracture of the clamped-end beams. The variation of mechanical parameters derived from finite element simulations and experiments provided an important reference value for device design improvement and played a crucial role in enhancing the reliability of thin film devices.

A Practical Approach for Determination of Thermal Stress and Temperature-Dependent Material Properties in Multilayered Thin Films

Analysis of the Thermal Stress in Infrared Films

Axisymmetric coupled thermo-mechanical response of multilayered elastic medium

Time-dependent analysis of 3D thermo-mechanical behavior of a layered half-space with anisotropic thermal diffusivity

Plane strain and three-dimensional analyses for thermo-mechanical behavior of multilayered transversely isotropic materials

Thermal Stress Analysis of MEMS Accelerometer Based on Finite Element Method

Calculation of Thermal Stress in Microstructure Fabricated by Multilayer Thin Films

Thermal stress concentration points and stress mutations in nano-multilayer film structures

Overview and applicability of residual stress estimation of film–substrate structure

Analysis of Thermal Behavior in Multi-Layer Metal Thin Films Based on Hyperbolic Two-Step Model

Elastic and elastic-plastic analysis of multilayer thin films filled with heterogeneous materials

Transient Thermal Grating Measurements and FEM Calculations of Thermoelastic Theory for Characterizing Multilayered Thin Films

Thermal Stress Analysis of a Trilayer Film/substrate System with Weak Interfaces

Manipulation of Effective Thermal Conductivity of Multilayer Thin Film by Varying Thickness Ratio of Layers Using Monte Carlo Simulation

Analysis of Simplified Heat Transfer Models for Thermal Property Determination of Nano-Film by TDTR Method

Size-Dependent Thermomechanical Responses of Nano-Sized Multilayers

A Micromechanics Model For Estimating The Effective Thermoelastic Properties Of Layered Media

Variation of MEMS Thin Film Device Parameters under the Influence of Thermal Stresses

Thermo-mechanical integrity of coatings with residual stress

Analytical modeling and numerical analysis of thermoelastic damping in ultrathin elastic films due to surface effects

Residual Stresses in the Elastoplastic Multilayer Thin Film Structures: the Cases of Si/Al Bilayer and Si/Al/Sio(2) Trilayer Structures