Abstract:A novel strategy employing core shell nanowire arrays (NWAs) consisting of Si/regioregular poly-(3-hexylthiophene) (P3HT) was demonstrated to facilitate efficient light harvesting and exciton dissociation/charge collection for hybrid solar cells (HSCs). We experimentally demonstrate broadband and omnidirectional light-harvesting characteristics of core shell NWA HSCs due to their subwavelength features, further supported by the simulation based on finite-difference time domain analysis. Meanwhile, core shell geometry of NWA HSCs guarantees efficient charge separation since the thickness of the P3HT shells Is comparable to the exciton diffusion length. Consequently, core shell HSCs exhibit a 61% Improvement of short-circuit current for a conversion efficiency (eta) enhancement of 31.1% as compared to the P3HT-infiltrated Si NWA HSCs with layers forming a flat air/polymer cell interface. The improvement of crystal quality of P3HT shells due to the formation of ordering structure at Si interfaces after air mass 1.5 global (AM 1.5G) illumination was confirmed by transmission electron microscopy and Raman spectroscopy. The core shell geometry with the interfacial Improvement by AM 1.5G illumination promotes more efficient exciton dissociation and charge separation, leading to eta improvement (similar to 140.6%) due to the considerable increase in V-oc from 257 to 346 mV, J(sc) from 11.7 to 18.9 mA/cm(2), and FF from 32.2 to 35.2%, which Is not observed in conventional P3HT-infiltrated Si NWA HSCs. The stability of the Si/P3HT core shell NWA HSCs in air ambient was carefully examined. The core shell geometry should be applicable to many other material systems of solar cells and thus holds high potential In third-generation solar cells.

Improvement of carrier collection in Si/a-Si:H nanowire solar cells by using hybrid ITO/silver nanowires contacts

Hybrid heterojunction and photoelectrochemistry solar cell based on silicon nanowires and double-walled carbon nanotubes.

Improved Nanocrystal Formation, Quantum Confinement and Carrier Transport Properties of Doped Si Quantum Dot Superlattices for Third Generation Photovoltaics

Silicon Nanocrystal Conjugated Polymer Hybrid Solar Cells with Improved Performance

Improved performance of GaAs-based micro-solar cell with novel polyimide/SiO 2 /TiAu/SiO 2 structure

Flexible silver nanowire meshes for high-efficiency microtextured organic-silicon hybrid photovoltaics

Silicon-nanocrystal-incorporated Ternary Hybrid Solar Cells

New Approaches To Improve The Performance Of Thin-Film Radial Junction Solar Cells Built Over Silicon Nanowire Arrays

Enhanced efficiency of graphene-silicon Schottky junction solar cell through inverted pyramid arrays texturation

Improved Interfacial Contact for Pyramidal Texturing of Silicon Heterojunction Solar Cells

Improvement of amorphous silicon n-i-p solar cells by incorporating double-layer hydrogenated nanocrystalline silicon structure

Origin of Photovoltage Enhancement via Interfacial Modification with Silver Nanoparticles Embedded in an a-SiC:H p-Type Layer in a-Si:H Solar Cells

Short-circuit Current Density and Fill Factor Improvement by Optimizing In2O3:H and Metal Back Reflector Layers for P-I-n A-Sige:H Thin Film Solar Cells

Significant Efficiency Enhancement Of Hybrid Solar Cells Using Core-Shell Nanowire Geometry For Energy Harvesting

Achieving a Record Open‐Circuit Voltage for Organic/Si Hybrid Solar Cells by Improving Junction Quality

The Bifunctional Tin-Doped Indium Oxide As Hole-Selective Contact and Collector in Silicon Heterojunction Solar Cell with A Stable Intermediate Oxide Layer

High Efficiency Organic-Si Hybrid Solar Cells with a One-Dimensional CdS Interlayer.

Enhanced carrier extraction of a-Si/c-Si solar cells by nanopillar-induced optical modulation.

Effective Way to Realize Optimized Carrier Recombination and Electrode Contact for Excellent Electrical Performance Silicon Nanostructure Based Solar Cells

Substantial Improvement of Short Wavelength Response in n-SiNW/PEDOT:PSS Solar Cell

Photoelectrodes with Enhanced Carrier Generation and Collection Through Optical Simulation and Materials Engineering