Abstract:Amorphous and nanocrystalline soft magnetic materials have attracted much attention in the area of sensor applications. In this work, the magnetoimpedance (MI) effect of patterned soft ferromagnetic meander-shaped sensor elements has been investigated. They were fabricated starting from the cobalt-based amorphous ribbon using the lithography technique and chemical etching. Three-turn (S1: spacing s = 50 μm, width w = 300 μm, length l = 5 mm; S2: spacing s = 50 μm, width w = 400 μm, length l = 5 mm) and six-turn (S3: s = 40 μm, w = 250 μm, length l = 5 mm; S4: s = 40 μm, w = 250 μm and l = 8 mm) meanders were designed. The 'n' shaped meander part was denominated as "one turn". The S4 meander possesses a maximum MI ratio calculated for the total impedance ΔZ/Z ≈ 250% with a sensitivity of about 36%/Oe (for the frequency of about 45 MHz), and an MI ratio calculated for the real part of the total impedance ΔR/R ≈ 250% with the sensitivity of about 32%/Oe (for the frequency of 50 MHz). Chemical etching and the length of the samples had a strong impact on the surface magnetic properties and the magnetoimpedance. A comparative analysis of the surface magnetic properties obtained by the magneto-optical Kerr technique and MI data shows that the designed ferromagnetic meander-shaped sensor elements can be recommended for high frequency sensor applications focused on the large drop analysis. Here we understand a single large drop as the water-based sample to analyze, placed onto the surface of the MI sensor element either by microsyringe (volue range 0.5-500 μL) or automatic dispenser (volume range 0.1-50 mL).

Fabrication of a Portable Magnetic Microcantilever Using Fe40Ni38Mo4B18 Amorphous Ribbon and Its Application as a Humidity Sensor by Coating with TiO2 Nanotubes

Fabrication and Characterization of Sio2 Microcantilever for High Sensitive Moisture Sensor

Micromachined SiO 2 microcantilever for high sensitive moisture sensor

Moisture measurement using porous aluminum oxide coated microcantilevers

Al2O3-coated Microcantilevers for Detection of Moisture at Ppm Level

Fabrication and characterization of SiO2 microcantilever for microsensor application

Electromagnetic Properties of Metal Coated-Micro/nano Coils Fabricated by Self-deformation

Fabrication of Micro-Cantilever Sensor Based on Clay Minerals for Humidity Detection

Fabrication Of Ferromagnetic Rolled-Up Microtubes For Magnetic Sensors On Fluids

Design of a Hybrid Micro/Nano Cantilever-based Resonant Sensor and its Fabrication Method

Magnetoimpedance Effect in the Ribbon-Based Patterned Soft Ferromagnetic Meander-Shaped Elements for Sensor Application

Fabrication and Characterization of a Polymer/Metal Bimorph Microcantilever for Ultrasensitive Thermal Sensing

Flexible impedance sensor based on Ti3C2Tx MXene and graphitic carbon nitride nanohybrid for humidity-sensing application with ultrahigh response

Microcantilever Humidity Sensor Based On Embedded Nmosfet With < 100 >-Crystal-Orientation Channel

Characterization and humidity sensing properties of the sensor based on Na2Ti3O7 nanotubes

Comparison of magnetoimpedance behaviors in meander CoFeNiSiB amorphous ribbon for deformation sensing applications

Metamaterial sensor application concrete material reinforced with carbon steel fiber

Flexible and Highly Sensitive Humidity Sensor Based on Sandwich-Like Ag/Fe3O4 Nanowires Composite for Multiple Dynamic Monitoring

High Resolution Magnetometer Based on a High Frequency Magnetoelectric MEMS-CMOS Oscillator

Relative Humidity Measurement Technology Based on Microcantilever Resonance

Formation of a Nanorod-Assembled TiO2 Actinomorphic-Flower-like Microsphere Film via Ta Doping Using a Facile Solution Immersion Method for Humidity Sensing