Abstract:With the recent advances in autonomous vehicles, there is an increasing need for sensors that can help monitor tire–road conditions and the forces that are applied to the tire. The footprint area of a tire that makes direct contact with the road surface, known as the contact patch, is a key parameter for determining a vehicle's effectiveness in accelerating, braking, and steering at various velocities. Road unevenness from features such as potholes and cracks results in large fluctuations in the contact patch surface area. Such conditions can eventually require the driver to perform driving maneuvers unorthodox to normal traffic patterns, such as excessive pedal depressions or large steering inputs, which can escalate to hazards such as the loss of control or impact. The integration of sensors into the inner liner of a tire has proven to be a promising method for extracting real-time tire-to-road contact patch interface data. In this research, a tire model is developed using Abaqus/CAE and analyzed using Abaqus/Explicit to study the nonlinear behavior of a rolling tire. Strain variations are investigated at the contact patch in three major longitudinal slip driving scenarios, including acceleration, braking, and free-rolling. Multiple vertical loading conditions on the tire are applied and studied. An intelligent tire prototype called KU-iTire is developed and tested to validate the strain results obtained from the simulations. Similar operating and loading conditions are applied to the physical prototype and the simulation model such that valid comparisons can be made. The experimental investigation focuses on the effectiveness of providing usable and reliable tire-to-road contact patch strain variation data under several longitudinal slip operating conditions. In this research, a correlation between FEA and experimental testing was observed between strain shape for free-rolling, acceleration, and braking conditions. A relationship between peak longitudinal strain and vertical load in free-rolling driving conditions was also observed and a correlation was observed between FEA and physical testing.

Analysis of Rolling Resistance of Tires with Run Flat Insert

Comparison of Tire Rolling Resistance Measuring Methods for Different Surfaces

Temperature Influence on Tire Rolling Resistance Measurements Quality

Investigation on dynamic characteristics of inserts supporting run-flat tyre based on the modified non-linear ground pressure distribution

Experimental And Fe Investigation On Rolling Resistance Of Truck Tires

Steady-State Temperature Field and Rolling Resistance Characteristics of Low-Speed and Low-Load Capacity Non-Pneumatic Tires

Numberical Analysis on the Steady-State Rolling of Load-Carrying Tire

Prediction of rolling resistance and wheel force for a passenger car tire: A comparative study on the use of different material models and numerical approaches

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

Thermo-Mechanical Coupling Analysis of Inserts Supporting Run-Flat Tires under Zero-Pressure Conditions

An Analysis on the Rolling Characteristics Between Tire and Dynamometer Drum

Method of Forming Road Surface Replicas Using 3D Printing Technology

Isogeometric Analysis for Accurate Modeling of Rolling Tires

Thermo-mechanical coupling analysis of transient temperature and rolling resistance for solid rubber tire: Numerical simulation and experimental verification

Finite Element Analysis of the Thermal Characteristics and Parametric Study of Steady Rolling Tires

NONLINEAR FE ANALYSIS FOR RUBBER COMPOSITE STRUCTURES

Study on the influence of cornering characteristics of complex tread tires on rolling resistance based on finite element method

Intelligent Tire Prototype in Longitudinal Slip Operating Conditions

The Model of Tires Rolling Resistance on Dual-roller

Theory and Method of Tire Rolling Kinematics and Prediction of Tire Forces and Moments

Analysis of tire frictional energy loss based on longitudinal slip test