Abstract:With the recent advances in autonomous vehicles, there is an increasing need for sensors that can help monitor tire–road conditions and the forces that are applied to the tire. The footprint area of a tire that makes direct contact with the road surface, known as the contact patch, is a key parameter for determining a vehicle's effectiveness in accelerating, braking, and steering at various velocities. Road unevenness from features such as potholes and cracks results in large fluctuations in the contact patch surface area. Such conditions can eventually require the driver to perform driving maneuvers unorthodox to normal traffic patterns, such as excessive pedal depressions or large steering inputs, which can escalate to hazards such as the loss of control or impact. The integration of sensors into the inner liner of a tire has proven to be a promising method for extracting real-time tire-to-road contact patch interface data. In this research, a tire model is developed using Abaqus/CAE and analyzed using Abaqus/Explicit to study the nonlinear behavior of a rolling tire. Strain variations are investigated at the contact patch in three major longitudinal slip driving scenarios, including acceleration, braking, and free-rolling. Multiple vertical loading conditions on the tire are applied and studied. An intelligent tire prototype called KU-iTire is developed and tested to validate the strain results obtained from the simulations. Similar operating and loading conditions are applied to the physical prototype and the simulation model such that valid comparisons can be made. The experimental investigation focuses on the effectiveness of providing usable and reliable tire-to-road contact patch strain variation data under several longitudinal slip operating conditions. In this research, a correlation between FEA and experimental testing was observed between strain shape for free-rolling, acceleration, and braking conditions. A relationship between peak longitudinal strain and vertical load in free-rolling driving conditions was also observed and a correlation was observed between FEA and physical testing.

Analysis of tire frictional energy loss based on longitudinal slip test

Research on simplified tire finite element modeling and simulation method

A Dynamic Model for Tire/Road Friction Estimation under Combined Longitudinal/Lateral Slip Situation

Thermo-Mechanical Behavior of Tread Rubber During High-Speed Friction

Experiment and Simulation Research on the Fatigue Wear of Aircraft Tire Tread Rubber

Prediction of rolling resistance and wheel force for a passenger car tire: A comparative study on the use of different material models and numerical approaches

Study on the influence of cornering characteristics of complex tread tires on rolling resistance based on finite element method

Numberical Analysis on the Steady-State Rolling of Load-Carrying Tire

An Integrated Approach for Friction and Wear Simulation of Tire Tread Rubber. Part I: Friction Test, Characterization, and Modeling

Experimental and Numerical Studies on Tire Tread Block Friction Characteristics Based on a New Test Device

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

Experimental and Numerical Study of Frictional Contact Behavior of Rolling Tire

Finite Element Analysis For Tire Tread Wear Under Typical Loading Conditions

High-speed Tribology Behaviors of Aircraft Tire Tread Rubber in Contact with Pavement

Finite Element Analysis for Tread Wear of Radial Tire

Thermo-mechanical-abrasive Coupling Analysis of Solid Rubber Tire under High-Speed Rolling

Intelligent Tire Prototype in Longitudinal Slip Operating Conditions

Thermo-mechanical coupling analysis of transient temperature and rolling resistance for solid rubber tire: Numerical simulation and experimental verification

Experimental Study on the High-Speed Frictional Behavior Between the Tire and Asphalt Pavement

FINITE ELEMENT ANALYSIS FOR SLIDING ABRASION OF TREAD BLOCKS OF RADIAL TIRE

Study on Wear Property of Truck and Bus Radial Tire Based on Friction Power