The comparative toxicity and therapeutic efficacy of adriamycin and the adriamycin-DNA complex in the chemotherapy of C3H mice with transplanted mammary adenocarcinoma.

I. Brown,H. Ward

DOI: https://doi.org/10.1016/S0304-3835(77)80026-8

IF: 9.756

1977-03-01

Cancer Letters

Abstract:

What problem does this paper attempt to address?

Flexural-Shear Behavior of High-Strength Concrete Short Columns

Armen Martirossyan,Yan Xiao

DOI: https://doi.org/10.1193/1.1423656

2001-01-01

Earthquake Spectra

Abstract:This paper discusses the seismic performance of high-strength concrete columns. The research is a part of an ongoing comprehensive experimental program to investigate seismic design methods of high-strength concrete structures. The first stage of the program involved testing of fifteen high-strength concrete stub columns under concentric axial compression. The concrete compressive strength was about 69 MPa (10,000 psi). In addition, a large database including eighty-six similar tests conducted by other researchers was constructed, and stress-strain behavior of high-strength concrete was investigated. Based on the analysis, a stress-strain relationship for high-strength concrete columns was proposed. Secondly, six 1/3-1/2 scale high-strength concrete short columns were tested under combined axial load and cyclic shear, with double curvature condition. The primary experimental parameters included axial load ratio, longitudinal reinforcement ratio, and volumetric ratio of transverse reinforcement. The proposed stress-strain relationship was used in the analysis of the lateral force–displacement relationship for high-strength concrete columns. Moment-curvature analysis, based on proposed equivalent stress block approach, as well as plastic hinge mechanism, has been incorporated in this analytical tool. The analytical results agreed well with the primary load-deflection envelopes obtained from the tests.
Compressive Behavior and Strength Prediction of Ultra-High Performance Concrete Confined by Normal and High Strength Steel Hoops

B. Shan,Z. W. Lv,J. Q. Chen,C. Xu,Y. Xiao,B. Huang

DOI: https://doi.org/10.1016/j.conbuildmat.2022.129176

IF: 7.4

2022-01-01

Construction and Building Materials

Abstract:Ultra-high performance concrete (UHPC) confined by steel hoops exhibits obvious performance advantages under high temperature or corrosive environment compared with the external steel or fiber-reinforced polymer (FRP) jackets, due to protection to the confinement component by UHPC cover. However, some fundamental knowledge gaps need to be filled to promote the application of this type of composite column, including the compressive behavior of UHPC confined by high-strength steel hoops, influence of UHPC cover on the axial load carrying capacity as well as lack of acceptable strength model for predicting the load carrying capacity of steel hoop-confined UHPC column. Therefore, a series of axial compression tests on 78 UHPC stub columns confined by normal- and high-strength steel hoops were tested, with varying lateral confining levels and thicknesses of UHPC cove. The experimental results show that using high-strength steel hoops as lateral confining component can more effectively improve the post-peak behavior of confined UHPC column than its ascending behavior, compared with the UHPC confined by normal-strength hoops. The UHPC cover can directly carry a considerable share of peak axial load, thus cannot be ignored for evaluating the load carrying capacity of the confined UHPC column. A special strength model is proposed for UHPC columns confined by normal- and high-strength steel hoops to predict the axial load carrying capacity, and it is validated with experimental data derived from this investigation and opened literature.
Behavior of Concrete Driven by Uniaxially Embedded Shape Memory Alloy Actuators

Zongcai Deng,Qingbin Li,Anquan Jiu,Lei Li

DOI: https://doi.org/10.1061/(ASCE)0733-9399(2003)129:6(697)

2003-01-01

Journal of Engineering Mechanics

Abstract:The behavior of a concrete specimen uniaxially embedded with a shape memory alloy (SMA) wire actuated by electrical current is studied in this paper. The main factors influencing the axial strain of the concrete specimen were examined through a sophisticated experimental program. The experimental results indicate that the SMA actuator can be employed as a way of prestressing for axial concrete specimens and can be used for controlling axial strain of concrete specimens. Also the influences of initial prestrain of SMA wires, modes activating electrical current, the actuation times, etc., on the axial strain behavior of concrete specimen are significant.
Behavior of Eccentrically Loaded Large-Scale CFST Slender Columns with Latticed Annular Steel

Zi-Ming Yang,Ju Chen

DOI: https://doi.org/10.1016/j.istruc.2024.107451

IF: 4.1

2024-01-01

Structures

Abstract:The eccentric compressive performance of circular CFST columns with latticed annular steel was studied through eccentric loading tests on three specimens with a slenderness ratio of 48. The Finite Element (FE) analysis, incorporating boundary conditions and material constitutive models consistent with the experimental setup, exhibited a high degree of concordance with the experimental findings. The validated FE model comprehensively investigated the confine effect of latticed annular steel on core concrete under eccentric compression, while also exploring the influence of different configurations of embedded steel skeletons on composite columns. Furthermore, it assessed and quantified the effects of the confinement factor of the steel tube, reinforcement ratio of the latticed annular steel, and slenderness ratio (lambda) on the ultimate bearing capacity of this composite structure at different load eccentricities ratio (e0/r). The relationship between balance eccentricity ratio and confinement factor has been established. By comparing the axial force-bending (Nu-Mu) interaction diagrams generated by different design rules, it is observed that the formulas in AISC 360-10 and Eurocode 4 tend to exhibit a conservative approach, while the formulas in DL/T 5629-2021 demonstrate a lack of conservatism. Finally, a proposal for a set of trilinear Nu-Mu interaction equations is made, which can yield more accurate results.
Experimental investigation on hysteretic properties and applications in beam-column connections of shape memory alloy plates

Yi Su,Jin Di,Xuhong Zhou,Bin Han,Fengjiang Qin,Long Hu,Jie Wang

DOI: https://doi.org/10.1016/j.tws.2024.112650

IF: 5.881

2024-11-01

Thin-Walled Structures

Abstract:Shape memory alloy (SMA) plates have demonstrate significant application prospects in seismic structures owing to their excellent mechanical behaviour and section adaptability. In this study, the mechanical properties and manifestations of SMA plates, particularly their cyclic tension-release behaviour, were systematically investigated. Analysis results of peak strength, self-centring capacity, and energy dissipation capacity showed that thickness, temperature, and loading protocol affect the hysteretic properties of SMA plates. Furthermore, an effective training scheme of constant 4% tensile strain, which can significantly increase the ultimate strength and self-centring capacity, was suggested for SMA plates to withstand cyclic tensile loads. Subsequently, a beam-column connection equipped with SMA plates was designed, and a set of quasi-static tests and numerical validations were conducted. The results verified the excellent self-centring capacity of the SMA plates, and the superiority and potential of applying SMA plate to aseismic structures were confirmed. Simultaneously, the SMA plates exhibited a lower energy dissipation capacity than the commonly used Q160 and ALA plates, which indicates that paralleling with other energy dissipation members is beneficial for improving the hysteretic properties of structures.

engineering, mechanical,mechanics, civil
Experimental study on improving the compressive property of damaged RC columns with prestressed SMA spirals

Jun Deng,Minting Zhong,Xiaoda Li,Zongchao Liu,Shangxiong Li

DOI: https://doi.org/10.1016/j.engstruct.2024.117916

IF: 5.582

2024-04-03

Engineering Structures

Abstract:Shape memory alloy (SMA) reinforcement is an emerging approach to efficiently strengthen structures. However, the effect of SMA on repairing the damaged structures is not clear. This study aimed to explore the availability of SMA on strengthening damaged reinforcement concrete (RC) columns through compression tests. The damaged specimens were strengthened with NiTiNb-SMA spirals, and the effect of pitch spacing was also considered. In addition, a theoretical framework was proposed to predict the ultimate bearing capacity of the strengthened damaged RC columns. Experimental results revealed that SMA strengthening can achieve a significant improvement in the compressive properties of damaged specimens, particularly in terms of strength (increase by 22%) and ductility (increase by 286%) which surpassed those of the intact ones. The strengthening effect of SMA was significantly influenced by the pitch spacing, with the lowest pitch spacing yielding the most favorable strengthening effect. Finally, the theoretical results agreed with the experimental results well (error < 6%), indicating the accuracy of the proposed theoretical framework. This study validated the effectiveness of the pre-stressed SMA spirals in strengthening the damaged RC columns.

engineering, civil
Seismic Behavior of Superelastic Shape Memory Alloy Spring in Base Isolation System of Multi-Story Steel Frame

Yuping Liu,Hongyang Wang,Canxing Qiu,Xingnan Zhao

DOI: https://doi.org/10.3390/ma12060997

IF: 3.4

2019-03-26

Materials

Abstract:Owing to excellent re-centering capability and good damping behavior, superelastic shape memory alloys (SMAs) are emerging as a potential new material to enhance the seismic resilience of civil structures. This paper focuses on using base isolation with SMA device for isolated structures. SMA springs are deemed to be promising candidate as the damper in the base isolation system, due to the compact form, damping contribution, restoring capability and flexible stiffness. This paper reported the concept of an innovative spring which is made of superelastic SMA wire. Then cyclic loading tests were carried out to evaluate the interested cyclic properties. Parametric analyses based on finite element simulations were conducted to reveal the versatile performance of SMA springs. To further examine its seismic behavior in the base isolation system, the SMA spring was later installed at the isolation level of a multi-story steel frame, based on the finite element model built in the earthquake engineering simulation platform OpenSees. An ordinary elastic spring is included for comparison to highlight the features of SMA springs. Both isolated frames were subjected to real earthquakes. The comparisons indicated that using SMA spring is more effective in controlling maximum and residual deformation for the protected superstructures. Thus, this paper well demonstrated the feasibility and merits of using SMA springs in the isolated frames.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
The effect of shape memory alloys on the ductility of exterior reinforced concrete beam-column joints using the damage plasticity model

Abdulsamee M. Halahla,Yazan B. Abu Tahnat,Amin H. Almasri,George Z. Voyiadjis

DOI: https://doi.org/10.1016/j.engstruct.2019.109676

IF: 5.582

2019-12-01

Engineering Structures

Abstract:Using shape memory alloys (SMA) bars can significantly enhance the ductility of exterior reinforced concrete joints, where they can replace the conventional steel reinforcement. This research focuses on studying the effect of using SMA on the ductility capacity of exterior reinforced concrete beam-column joints at different column axial load levels. Finite element analysis was carried out and compared with the experimental results from the literature for verification purposes, and both were compared with theoretical solutions. The results show that the use of SMA bars can improve the ductility of reinforced concrete joints noticeably, without losing load capacity. The finite element method was successful in capturing the large strain and superelastic behavior of SMA bars.

engineering, civil
Cyclic load behaviour of reinforced concrete columns with SMA and ECC in the critical regions

Gisha George,K.R. Bindhu,A.H.M. Muntasir Billah

DOI: https://doi.org/10.1016/j.istruc.2023.105497

IF: 4.1

2023-12-01

Structures

Abstract:Design techniques that can reduce the residual deformation are necessary to ensure that reinforced concrete (RC) structures function properly after earthquakes. The use of superelastic materials in the plastic hinge region permits the structure to undergo large displacements with less residual displacement upon load removal. The present study deals with the incorporation of two innovative materials, super-elastic shape memory alloy (SMA) and engineered cementitious composites (ECC), in the critical region or plastic hinge zone of the column. This numerical study focused on the seismic performance evaluation of full-scale RC circular cantilever columns reinforced with two types of nickel-based and two iron-based SMA and ECC in the critical region. The specimens were subjected to a reverse cyclic lateral loading with a constant axial load at the top. The performance of these hybrid columns was compared with those of conventional steel-reinforced columns and steel-reinforced columns with ECC in the critical region. The results of the study revealed that the columns reinforced with SMA and ECC in the critical region showed negligible residual displacement compared to the normal and ECC columns. The column reinforced with the FeNCATB SMA and ECC in the critical region showed better behaviour in terms of a higher load-carrying capacity and ultimate displacement/rotation under a higher drift ratio. From the longitudinal rebar strain profile, it is evident that this hybrid column specimen did not reach the elastic strain limit at a higher drift ratio than the other specimens.

engineering, civil
Material characterization of iron-based shape memory alloys for use in self-centering columns

Huanpeng Hong,Bora Gencturk,Mehdi Saiid Saiidi

DOI: https://doi.org/10.1088/1361-665x/ad4d5f

IF: 4.1

2024-05-20

Smart Materials and Structures

Abstract:Iron-based shape memory alloys (FeSMA) are emerging as promising materials for use in post-tensioning concrete structures to provide self-centering capabilities during a seismic event. Past experimental studies on FeSMA focused on strengthening or repairing existing structural components. In addition to the structural rehabilitation for gravity loading, FeSMA also have potential for use in self-centering columns subjected to seismic loads. However, the basic material properties, such as strength, ductility, recovery strain, actuation stress (i.e., prestress) stability, low-cycle fatigue resistance, and temperature dependence of FeSMA related to self-centering column applications have not been studied so far. To fill this knowledge gap and determine the feasibility of using FeSMA in self-centering columns, this study performed a comprehensive characterization and analysis of FeSMA both before and after actuation (i.e., thermal stimulation). The strength, ductility, and recovery strain of FeSMA before actuation were tested at different temperatures from -40°C to 50°C. After actuation, the actuation stress, low-cycle fatigue resistance, and strain capacity of FeSMA were tested at different temperatures from -40°C to 50°C, prestrain levels from 4% to 30%, and under low-cycle fatigue loading with strain amplitudes from 0.5% to 1.0%. The results from this study demonstrated that FeSMA exhibit high ductility, cyclic actuation stress stability, and low-cycle fatigue resistance at temperatures from -40°C to 50°C. Furthermore, it was found that increasing the prestrain level can effectively increase the post-actuation strain amplitude at which the actuation stress reduces to zero. A prestrain level between 15% and 20% is recommended for application of FeSMA in self-centering columns. The research findings from this study demonstrated the feasibility of using FeSMA in self-centering columns subject to seismic loading.

materials science, multidisciplinary,instruments & instrumentation
Behavior of Smart Concrete Beams with Embedded Shape Memory Alloy Bundles

Lei Li,Qingbin Li,Fan Zhang

DOI: https://doi.org/10.1177/1045389X06071974

IF: 2.7

2007-01-01

Journal of Intelligent Material Systems and Structures

Abstract:The behavior of smart concrete beams with embedded shape memory alloy (SMA) bundles is investigated in this study. Two beams measuring 1996 x 99 x 85 cm(3), which will be integrated into a smart bridge in a freeway, are manufactured and examined. Each beam contains six trusses of SMA bundles used as actuators to achieve recovery force. The SMA bundles are connected with pre-stressing steel strands and separated from the concrete matrix, so that temperature interaction between SMA bundles and the matrix can be reduced to as low as possible. Some temperature sensors, reinforcement meters, and displacement sensors are used to monitor the active control effect of SMA bundles, all the data are acquired through a 16-channel dynamic data-acquisition system, and each beam is examined several times with different activating current intensity. Experimental results indicate that the recovery force induced by SMA bundles is significant and controllable, the deflection generated by the SMA bundles at the middle span of the beam is about 0.44 mm, and the capability of resisting overload of each beam is about 2.98 kN (average). A relationship between SMA temperature and activating/inactivating time is also formulated. The conclusion is that SMA can be used in civil engineering structures either from a technological or economic aspect.
Experimental study on the seismic performance of self-centering bridge piers incorporating ECC and superelastic SMA bars in the plastic hinge regions

Hui Qian,Yixiang Ye,Changbin Yan,Guangyao Jin,Can Li,Yifei Shi

DOI: https://doi.org/10.1016/j.istruc.2022.11.031

IF: 4.1

2022-11-20

Structures

Abstract:The seismic performance of pier columns is important to the safety of bridge structures. To improve the deformation capacity and energy dissipation, reduce the residual deformation and plastic damage, and resume normal functions with no or minimal repair after an earthquake, an innovative pier column with self-centering capability based on shape memory alloy (SMA) and engineered cementitious composites (ECC) was proposed. In the plastic hinge region of the pier column, SMA bars and ECC were used to replace the ordinary longitudinal reinforcements and concrete. The superelasticity of SMA can be used to achieve the self-centering function of the pier column; the strain hardening characteristic of ECC can improve the energy dissipation capacity of the pier column and reduce damage. Five specimens were produced, i.e., ordinary reinforced concrete bridge pier (R/C-BP), reinforced ECC bridge pier (R/ECC-BP), steel strand reinforced concrete bridge pier (SS/C-BP), steel strand reinforced ECC bridge pier (SS/ECC-BP) and SMA bar ECC bridge pier (SMA/ECC-BP). After low cycle repeated loading tests, the seismic performances of different piers, such as failure mode, bearing capacity, ductility and energy dissipation capacity, were compared and analyzed. The test results show that SMA material can significantly improve the deformation ability and ductility of the structure and reduce the residual deformation of the structure; ECC material can effectively improve the ductility and energy dissipation capacity of the structure and reduce the speed of cracking. Compared with ordinary reinforced concrete specimens, SMA/ECC pier columns were less damaged with better ductility and self-centering effects and exhibited excellent seismic performance.

engineering, civil
Seismic performance of self-centering beam-column joints reinforced with superelastic shape memory alloy bars and engineering cementitious composites materials

Hui Qian,Zongao Li,Jinzhao Pei,Liping Kang,Hongnan Li

DOI: https://doi.org/10.1016/j.compstruct.2022.115782

IF: 6.3

2022-08-15

Composite Structures

Abstract:This paper presents a preliminary experimental investigation of a self-centering beam-column joint reinforced with superelastic Ni-Ti SMA bars and ECC materials. As an alternative to the longitudinal bars in the beam plastic hinge, SMA is used to reduce the residual deformations and dissipate energy, whereas the ECC materials used in the critical region of the joints can improve the ductility of the structural member. Five 1/2 scale frame joints were designed and manufactured. The failure phenomenon, bearing capacity, energy dissipation capacity, displacement ductility, residual deformation, and self-centering performance of the joints were comparatively analyzed through a low cyclic loading experiment. A finite element model of SMA-ECC joints was established, and the influence of the SMA and ECC on the seismic behavior of the joints was investigated. The study results show that SMA bars can dramatically enhance their self-centering capability, enabling self-retrofitting damage. The ECC material is helpful for optimizing the development of the plastic hinge at the end of the beam and improving the ductility and energy dissipation capacity of the structure. The SMA-ECC composite materials exhibit good supplement to significantly improve the ductility, energy dissipation, and self-centering capabilities and delay the stiffness degradation of the structure under extreme events.

mechanics,materials science, composites
Experimental study on axial compression for composite hollow column of steel fiber, high-strength lightweight aggregate concrete and angle steel

Zehui Xiang,Dan Qiao,Jiangang Niu,Weiheng Liu

DOI: https://doi.org/10.1038/s41598-022-16581-w

IF: 4.6

2022-07-20

Scientific Reports

Abstract:In order to study the axial compression performance for composite hollow column of steel fiber, high-strength lightweight aggregate concrete and angle steel, the axial compression tests were carried out on five composite hollow columns of steel fiber, high-strength lightweight aggregate concrete and angle steel with the variation parameters of hollow ratio (0%, 15%, 16%, 32% and 36%) and the form of opening (round hole and square hole). The failure phenomena and failure forms of the specimens were observed, and their stress–strain curves were measured, and the axial bearing capacity formula suitable for composite hollow column of steel fiber, high-strength lightweight aggregate concrete and angle steel was established. The following conclusions may be obtained from the test results: the axial compression performance for the composite hollow columns of angle steel is influenced by the hollow ratio and opening form greatly. The axial compression performance for composite hollow columns of steel fiber, high-strength lightweight aggregate concrete and angle steel is almost close to that of composite solid columns when the hollow ratio is low; The higher the void ratio, the more the cracks at the surface of the concrete, some transverse cracks appear, the peak load decreases by about 5–38%, and the deformation ductility coefficient increases gradually; The deformation ductility coefficient of round-hole hollow column is lower than that of square-hole hollow column. Based on the test, the finite element software ABAQUS is used to simulate the SCAH column. The correctness of the model is verified via the comparison between the numerical simulation results and the test results. At the same time, the stress nephogram of concrete and steel at different stages and the stress nephogram at concrete restraint state are simulated. According to the finite element simulation results, Mander model is used to calculate the axial compression bearing capacity of composite hollow column of angle steel. The high calculation accuracy and suitable for popularization can be obtained.

multidisciplinary sciences
Experimental Study on Concrete-Encased Composite Columns with Separate Steel Sections

Congzhen Xiao,Fei Deng,Tao Chen,Zuozhou Zhao

DOI: https://doi.org/10.12989/scs.2017.23.4.483

2017-01-01

Steel and Composite Structures

Abstract:This paper presents an experimental study on the behavior of concrete-encased composite columns with multi-separate steel sections subjected to axial and eccentric loads. Six 1/4-scaled concrete-encased composite columns were tested under static loads. The specimens were identical in geometric dimensions and configurations, and the parameter of this experiment was the eccentricity ratio of the applied load. Each two of the specimens were loaded with 0, 10%, and 15% eccentricity ratios. The capacity, deformation pattern, and failure mode of the specimens were carefully examined. Test results indicate that full composite action between the concrete and the steel sections can be realized even though the steel sections do not connect with one another. The concrete-encased composite columns can develop stable behavior and sufficient deformation capacity by providing enough transverse reinforcing bars. Capacities of the specimens were evaluated based on both the Plain Section Assumption (PSA) method and the superimposition method. Results show that U.S. and Chinese codes can be accurate and safe in terms of bending capacities. Test results also indicate that the ACI 318 and Mirza methods give the best predictions on the flexural stiffness of this kind of composite columns.
Review of studies on concrete columns confined by lateral reinforcement under axial compression and lateral cyclic loading

Chongchi Hou,Wenzhong Zheng

DOI: https://doi.org/10.1002/suco.202200522

2022-10-08

Structural Concrete

Abstract:The restraint of lateral reinforcement can effectively improve the bearing capacity and deformation capacity of confined concrete columns. Generally, the behavior of confined concrete column under axial compression and lateral cyclic loading is a complex process and has been the subject of numerous studies dating from last century. This paper presents a review to summarize and discuss the investigations of concrete columns confined by lateral reinforcements under axial compression and lateral cyclic loading with the aim of obtaining a clear understanding on the mechanism and performance of confined concrete column. In this paper, a test database of confined concrete columns under axial compression and lateral cyclic loading is established, presented, and evaluated. The detailed provisions of confined concrete columns from current codes are concluded and it is found that these codes neglect the beneficial effect of lateral reinforcement on shear bearing capacity of confined concrete columns under lateral cyclic loading. Additionally, the stress–strain models and development of lateral reinforcement strain/stress in confined concrete columns under axial compression are mainly presented and discussed. Moreover, theoretical and experimental studies on seismic behavior of confined concrete columns are evaluated, including compression‐flexure calculation, shear bearing capacity, ductility, energy dissipation capacity, and other detailed requirements. Furthermore, main influential factors of confined concrete columns under axial compression and lateral cyclic loading are discussed, respectively and it is founded that the synergy work of longitudinal and lateral reinforcement, and the deformation coordinated relationship between lateral reinforcement and core concrete significantly affect the bearing capacity and deformation capacity of confined concrete columns. Therefore, further studies are suggested to optimize and quantify the strength grade combination relationship between lateral reinforcement, longitudinal reinforcement, and concrete to achieve economical design and construction.

construction & building technology,engineering, civil
Study on reinforced concrete beams strengthened using shape memory alloy wires in combination with carbon-fiber-reinforced polymer plates

Hui Li,Zhi-qiang Liu,Jin-ping Ou

DOI: https://doi.org/10.1088/0964-1726/16/6/059

IF: 4.1

2007-10-26

Smart Materials and Structures

Abstract:It has been proven that carbon-fiber-reinforced polymer (CFRP) sheets or plates are capable of improving the strength of reinforced concrete (RC) structures. However, residual deformation of RC structures in service reduces the effect of CFRP strengthening. SMA can be applied to potentially decrease residual deformation and even close concrete cracks because of its recovery forces imposed on the concrete when heated. Therefore, a method of a RC structure strengthened by CFRP plates in combination with SMA wires is proposed in this paper. The strengthening effect of this method is investigated through experiments and numerical study based on the nonlinear finite element software ABAQUS in simple RC beams. Parametric analysis and assessment of damage by defining a damage index are carried out. The results indicate that recovery forces of SMA wires can decrease deflections and even close cracks in the concrete. The recovery rate of deflection of the beam increases with increasing the ratio of SMA wires. The specimen strengthened with CFRP plates has a relatively large stiffness and smaller damage index value when the residual deformation of the beam is first reduced by activation of the SMA wires. The effectiveness of this strengthening method for RC beams is verified by experimental and numerical results.

materials science, multidisciplinary,instruments & instrumentation
High‐strength steel‐wire‐mesh reinforced square concrete filled steel tubular columns: Concept and compressive behavior

Ming‐Xiang Xiong,Gong‐Yu Xiong,Qi‐Dong Hu,Xu‐Chi Chen

DOI: https://doi.org/10.1002/tal.1993

2022-11-16

The Structural Design of Tall and Special Buildings

Abstract:Summary Confinement from steel tube to concrete core is generally low in square concrete‐filled steel tubular (CFST) columns compared with their circular counterparts. To improve it, a new confining measure based on high‐strength steel wire meshes (SWMs) has been proposed in this study. Different from traditional measures usually confining the concrete core from outside of it, the SWM confines the concrete core from inside of it by utilizing interaction force between SWM and concrete. Axial compression test on short SWM reinforced CFST columns was conducted to examine the efficiency of SWM. The test results demonstrated that the compressive load‐carrying capacity of the square CFST column could be improved by 21.7% with a steel wire ratio of 1.54%. Finite element analysis was carried out to investigate some mechanical behaviors that were not captured in the test. It was revealed that the strength of SWM can be fully utilized, provided the entire section of concrete is reinforced by SWM and the SWM is placed along the middle half‐part of column. Based on the results of this study, the use of high‐strength SWM is proved an effective measure to improve the compressive performance of square CFST columns.

construction & building technology,engineering, civil
Seismic performance of self-centering concrete-filled square steel tubular column-to-steel beam connection equipped with SMA bolts

Lihua Zhu,Qiujun Ning,Wei Han,Cheng Zhao

DOI: https://doi.org/10.1016/j.tws.2022.110351

2022-12-01

Abstract:This study demonstrates the considerable potential of the combined application of superelastic NiTi shape memory alloy (SMA) bolts and brass friction energy dissipation devices for self-centering connections to effectively deal with both the large residual drift and lower energy dissipation of traditional connections after an earthquake. Cyclic tests were conducted on eight 1/2 scaled concrete-filled square steel tubular (CFSST) column-to-steel beam connections, including seven T-stub steel connections with SMA bolts and one conventional T-stub steel connection with normal high-strength bolts. The mechanical behavior of the connection was analyzed considering the effect of the pre-strain of the SMA bolt and the pretension force in the friction bolts through web friction devices (WFDs). The results showed that the SMA connection specimen exhibited recognizable double-flag-shaped hysteretic responses with excellent recentering ability and moderate energy dissipation capability, and the primary structural components remained elastic after each cyclic loading. The self-centering capacity of the SMA connection increases with an increase in the pre-strain of the SMA bolt, and the energy dissipation capacity of the SMA connection increases with an increase in the pre-tension force in the friction bolts. Moreover, the SMA self-centering connection has good shock resistance and repairability. After an earthquake, the seismic performance of the SMA connection can be quickly restored by replacing the T-stub steel.

engineering, mechanical,mechanics, civil
Axial compression performances and bearing capacity prediction of self-compacting fly ash concrete filled circle steel tube columns

Cun Hui,Yihao Zhang,Zeya Ma,Ran Hai

DOI: https://doi.org/10.1038/s41598-024-72150-3

IF: 4.6

2024-09-11

Scientific Reports

Abstract:To solve the problem of a large amount of fly ash accumulation and study the axial compression and bearing capacity prediction of the self-compacting fly ash concrete filled circle steel tube (SCCFST) columns, eight specimens are designed to explore the impact of concrete strength grade, internal structural measures, and additional parameters. The stress, progression of deformation, and failure mode of each specimen are observed during the loading process. The load–displacement curves, load-strain curves, characteristic load and displacement, ductility, and stiffness degradation are analyzed. The findings revealed that shear deformation occurred predominantly in the middle and upper portions of the steel tubes. Enhancing the strength of the concrete or adopting internal structural measures could increase the bearing capacity and ductility of the specimens. The peak load and ductility could be increased by up to 17.6 and 53.6%, respectively. The proposed unified calculation equation for the axial compression bearing capacity of SCCFST columns demonstrates notable reliability and precision. Furthermore, these tests offer valuable references for the engineering application of various forms of SCCFST columns, which are of significant importance in practical engineering.

multidisciplinary sciences

The comparative toxicity and therapeutic efficacy of adriamycin and the adriamycin-DNA complex in the chemotherapy of C3H mice with transplanted mammary adenocarcinoma.

Flexural-Shear Behavior of High-Strength Concrete Short Columns

Compressive Behavior and Strength Prediction of Ultra-High Performance Concrete Confined by Normal and High Strength Steel Hoops

Behavior of Concrete Driven by Uniaxially Embedded Shape Memory Alloy Actuators

Behavior of Eccentrically Loaded Large-Scale CFST Slender Columns with Latticed Annular Steel

Experimental investigation on hysteretic properties and applications in beam-column connections of shape memory alloy plates

Experimental study on improving the compressive property of damaged RC columns with prestressed SMA spirals

Seismic Behavior of Superelastic Shape Memory Alloy Spring in Base Isolation System of Multi-Story Steel Frame

The effect of shape memory alloys on the ductility of exterior reinforced concrete beam-column joints using the damage plasticity model

Cyclic load behaviour of reinforced concrete columns with SMA and ECC in the critical regions

Material characterization of iron-based shape memory alloys for use in self-centering columns

Behavior of Smart Concrete Beams with Embedded Shape Memory Alloy Bundles

Experimental study on the seismic performance of self-centering bridge piers incorporating ECC and superelastic SMA bars in the plastic hinge regions

Seismic performance of self-centering beam-column joints reinforced with superelastic shape memory alloy bars and engineering cementitious composites materials

Experimental study on axial compression for composite hollow column of steel fiber, high-strength lightweight aggregate concrete and angle steel

Experimental Study on Concrete-Encased Composite Columns with Separate Steel Sections

Review of studies on concrete columns confined by lateral reinforcement under axial compression and lateral cyclic loading

Study on reinforced concrete beams strengthened using shape memory alloy wires in combination with carbon-fiber-reinforced polymer plates

High‐strength steel‐wire‐mesh reinforced square concrete filled steel tubular columns: Concept and compressive behavior

Seismic performance of self-centering concrete-filled square steel tubular column-to-steel beam connection equipped with SMA bolts

Axial compression performances and bearing capacity prediction of self-compacting fly ash concrete filled circle steel tube columns