Abstract:<p>The effects of substituting W with γ′ formers (Al, Ti, Ta, Mo and Nb) on the microstructural stability of a base model alloy Co-20Ni-7Al-8W-1Ta-4Ti were studied using a high-throughput diffusion-multiple approach. A substantial amount of composition-microstructure data was obtained from a single sample, enabling deeper understanding of the alloying effects. It was found that alloy 15Al0W still contains stable γ′ phase at 1000 °C for 1000 h even with a W content of zero. However, the γ′ volume fraction of this alloy was far lower than other W-containing alloys, indicating that W plays an important role on retaining the stability of the γ′ phase. Except for Ti, substituting W with other γ′ forming elements promotes the precipitation of detrimental phases, with a potency of Nb > Ta≈Al > Mo > Ti. The Nb content should be carefully controlled due to its strong effect on inducing the precipitation of the χ phase. The literature data for W-free alloy systems were discussed in comparison to the current W-containing alloy system in order to analyze the role of W in stabilizing the γ′ phase at high temperatures. Furthermore, the γ′ strength and density of more than 300 alloys from the investigated diffusion multiple were analyzed using classic models established for Ni-base superalloys, to guide the alloy design aiming to achieve higher strength to weight ratio. The substitution of W with Ti or Al could significantly reduce the alloy density, but would also decrease the γ′ strength to some extents. These negative effects could be counterbalanced by moderate additions of Ta and Nb. This study will be helpful for the accelerated design of multi-component CoNi-base alloys to achieve light weight and high strength.</p>

Design of refractory intermetallic alloys based on γ′-phase with high melting temperature. Part 1

Design of refractory intermetallic alloys based on γ'-phase with high melting temperature. Part 2

Design of a Co–Al–W–Ta Alloy Series with Varying γ′ Volume Fraction and Their Thermophysical Properties

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

The Mechanical Properties of Intermetallic Ni50−xTi50Alx Alloys (X=6,7,8,9)

Theoretical Exploration of Alloying Effects on Stabilities and Mechanical Properties of γʹ Phase in Novel Co–Al–Nb-Base Superalloys

Design of high-strength refractory complex solid-solution alloys

Microstructure and elevated-temperature mechanical properties of refractory AlMo0.5NbTa0.5TiZr High Entropy Alloy fabricated by powder metallurgy

Microstructures and Mechanical Behaviors of NiAlFe Intermetallic Compounds

Composition and Temperature Stability of η and δ Phases for Future Nickel-Base Superalloys for Turbine Disks Application

Microstructure and mechanical properties of multi-phase reinforced Hf-Mo-Nb-Ti-Zr refractory high-entropy alloys

Thermo-mechanical behavior of hypoeutectic Ni-Y-Zr alloys

Density functional theory study of the thermodynamic and elastic properties of Ni-based superalloys

Phase equilibria, thermodynamic assessment, and the mechanical property of B2 phase of the Al-Ga-Ni ternary system

High-throughput exploration of alloying effects on the microstructural stability and properties of multi-component CoNi-base superalloys

Application of Computational Thermodynamics to the Design of a Co-Ni-Based γ′-Strengthened Superalloy

Influence of W, Mo and Ti trace elements on the phase separation in Al8Co17Cr17Cu8Fe17Ni33 based high entropy alloy

A thermochemical database from high-throughput first-principles calculations and its application to analyzing phase evolution in AM-fabricated IN718

Development of low-density γ/γ′ Co–Al–Ta-based superalloys with high solvus temperature

Thermal Expansion of a Multiphase Intermetallic Ti-Al-Nb-Mo Alloy Studied by High-Energy X-ray Diffraction

The Effect of Tantalum, Tungsten, and Rhenium Additions on the Tensile-Deformation Behavior of Model Nickel-Based Single-Crystal Superalloys at Intermediate Temperature