Abstract:Titanium alloy has the advantages of low thermal conductivity, a small expansion coefficient and being non-magnetic, making it an ideal low-temperature structural material. In this paper, the typical TC4 titanium alloy in industrial titanium alloy is selected as the research object. The microstructure deformation law and mechanical behavior of TC4 titanium alloy at liquid nitrogen temperature are mainly investigated, and compared with the microstructure and properties at room temperature. The macroscopic and microscopic deformation mechanism of the simultaneous increase in elongation and hardening index of titanium alloy at low temperature is revealed, which provides a basic basis for the low-temperature deformation mechanism and strengthening and toughening design of titanium alloy. Based on the uniaxial tensile tests at room temperature (298 K) and low temperature (77 K), the effects of low temperature on the yield strength, elongation, tensile strength and work hardening curve of titanium alloy were compared and analyzed. The strength/plasticity synergistic improvement of TC4 titanium alloy under low-temperature deformation was found. At low temperature, the yield strength, tensile strength and elongation of TC4 titanium alloy are improved compared with room temperature. The tensile strength increases from 847.93 MPa at 298 K to 1318.70 MPa at 77 K, and the elongation increases from 21.8% at 298 K to 24.9% at 77 K. The grain morphology, grain orientation, dislocation density and fracture morphology of titanium alloy under room temperature and low-temperature tensile conditions were studied by SEM and EBSD. The results of fracture morphology characterization at room temperature and low temperature show that TC4 titanium alloy exhibits ductile fracture characteristics and a large number of dimples are formed on the fracture surface. The dimple depth at low temperature is shallower than that at room temperature and the overall surface is more flat. Compared with room temperature deformation, the deformation process of TC4 titanium alloy in a low-temperature environment produces stronger dislocation pile-up and forms a large number of twins, but the grain rotation is more significant, which effectively alleviates the stress concentration and delays the initiation and propagation of cracks at grain boundaries.

Large strain extrusion machining of pure titanium at cryogenic temperature: experimental and simulation insights into microstructure and mechanical properties evolution

Simultaneous improvement in strength and ductility of CT20 titanium alloy at cryogenic temperature

Microstructural evolution and cryogenic-normal temperature deformation behavior of the near-α titanium alloy TA15 fabricated by laser powder bed fusion

Microstructures and mechanical deformation behaviors of ultrafine-grained commercial pure (grade 3) Ti processed by two-step severe plastic deformation

Microstructure and Mechanical Properties of TC4 Titanium Alloy at the Temperature of 77K

Twinning Behavior and Its Effect on Mechanical Behavior of Commercial Titanium at Cryogenic Temperature

Microstructural Evolution and Mechanical Properties of Ultrafine‐Grained Ti Fabricated by Cryorolling and Subsequent Annealing

Comparative study of room and cryogenic deformation behavior of additive manufactured Ti‐6Al‐4V alloy

Compressive deformation behaviors of coarse- and ultrafine-grained pure titanium at different temperatures: A comparative study

Grain refinement in titanium prevents low temperature oxygen embrittlement

Effect of low-temperature (77 K) quasihydrostatic extrusion on the properties of high-purity titanium: The role of initial structural state

Selective Laser Melting under the Reactive Atmosphere: A Convenient and Efficient Approach to Fabricate Ultrahigh Strength Commercially Pure Titanium Without Sacrificing Ductility

Correlation between Processing and Mechanical Properties of CT20 Cryogenic Titanium Alloy Tubes

In situ TEM observations of thickness effect on grain growth in pure titanium thin films

High-cycle-fatigue Induced Continuous Grain Growth in Ultrafine-Grained Titanium

Evolution of microstructure, macrotexture and mechanical properties of high strength biomedical TA4 pure titanium during multi-pass ECAP

Optimizing the mechanical properties of dual-phase Ti-6242s titanium alloy at 550°C using the boundary architecture

Microstructure Evolution Through Cryogenic Rolling of Ultra-High Purity Titanium Produced by Electron Beam Melting

Towards understanding the microstructure and temperature rule in large strain extrusion machining

Formation mechanism of lamellar bimodal microstructure and mechanical property in the high temperature near α titanium alloy

Microstructure alteration in the high-speed machining of titanium alloy involved with tool wear and cryogenic condition