Abstract:Cobaltite-based perovskite materials such as La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ (LSCF), Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3−δ (BSCF) which have rapid surface activation and mixed ionic and electronic ionic conductivity (MIEC) usually mixed with ionic conducting electrolyte material to lower cathodic polarization resistance. Moreover, decreasing the particulate size of the cathode at nanoscale can effectively enhance the ORR activity of the cathode by extending the electrochemically active sites due to its high surface area. However, due the high surface energy, the nanoparticles easily aggregate before mixing into homogeneous heterophase nanoparticles, resulting in significant coarsening between adjacent particles during high-temperature sintering. In this study, GDC and LSCF-GDC composite powders were synthesized via advance sol-gel method. The physicochemical properties such as sintering behavior, phase stability, etc. of the synthesized nanopowders were investigated. The optimal sintering conditions of GDC nanopowders were evaluated based on the relative density and total conductivity of the sintered GDC pellets. Furthermore, the electrochemical performances of the LSCF-GDC nanocomposite cathodes were measured by the electrochemical impedance spectroscopy (EIS). The microstructural characteristics of the LSCF-GDC nanocomposite cathode were quantified via a 3D reconstruction techniques and related to electrochemical performance of the Ni-YSZ anode supported SOFC single cell.

Effect of cold sintering on the sintering shrinkage matching of NiO-GDC anode with GDC electrolytes in making anode-supported solid oxide fuel cells

Effects of Sintering Parameters on the Low-Temperature Densification of GDC Electrolyte Based on an Orthogonal Experiment

Microstructures, conductivities, and electrochemical properties of Ce0.9Gd0.1O2 and GDC–Ni anodes for low-temperature SOFCs

Fabrication and Electrochemical Characterizations of Nd2NiO4+δ-Ce0.8Gd0.2O2−δ Composite Cathodes for Anode-Supported Intermediate Temperature Solid Oxide Fuel Cells

Co-Sintering of SDC / NiO-SDC Bi-Layers Prepared by Tape Casting

Fabrication of NiO-SDC Composite Anodes Using Gel-Casting for Low-Temperature SOFCs

Performance of Nd2NiO4+δ-Ce0.8Gd0.2O2-δ Composite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Nanostructured Lscf-GDC Cathodes Via a Sol–Gel Method for High Performance Solid Oxide Fuel Cells

Preparation of Porous NiO-Ce0.8Sm0.2O1.9 Ceramics for Anode-supported Low-temperatureSolid Oxide Fuel Cells

Sintered powder-base cathode over vacuum-deposited thin-film electrolyte of low-temperature solid oxide fuel cell: Performance and stability

Ni/SDC Materials for Solid Oxide Fuel Cell Anode Applications by the Glycine-Nitrate Method

Preparation and Performance of Nanostructured Porous Thin Cathode for Low-Temperature Solid Oxide Fuel Cells by Spin-Coating Method

Effect of Characteristics of (Sm,ce)o-2 Powder on the Fabrication and Performance of Anode-Supported Solid Oxide Fuel Cells

Improvement of the Performances of Tubular Solid Oxide Fuel Cells by Optimizing Co-Sintering Temperature of the NiO/YSZ Anode-Ysz Electrolyte Double Layers

Low-temperature co-sintering of co-ionic conducting solid oxide fuel cells based on Ce 0.8 Sm 0.2 O 1.9 -BaCe 0.8 Sm 0.2 O 2.9 composite electrolyte

Low Temperature Solid Oxide Fuel Cells with Hierarchically Porous Cathode Nano-Network

Effect of Anode Calcination on the Performance and Redox Stability of Low-Temperature Solid Oxide Fuel Cells Prepared Via Impregnation

Performance of Nd$lt;inf$gt;2$lt;/inf$gt;NiO$lt;inf$gt;4+delta$lt;/inf$gt;-Ce$lt;inf$gt;0.8$lt;/inf$gt;Gd$lt;inf$gt;0.2$lt;/inf$gt;O$lt;inf$gt;2-delta$lt;/inf$gt; Composite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Low Temperature Co-Sintering of Sr2Fe1.5Mo0.5O6−δ–Gd0.1Ce0.9O2−δ Anode-Supported Solid Oxide Fuel Cells with Li2O–Gd0.1Ce0.9O2−δ Electrolyte

Effects of Adding Alumina to the Nickel-Zirconia Anode Materials for Solid Oxide Fuel Cells and a Two-Step Sintering Method for Half-Cells

Intermediate Temperature Solid Oxide Fuel Cell with Lscf-GDC Nanofiber Cathode by Electrophoretic Deposition