Abstract:In contemporary architecture, a residential kitchen exhaust shaft is a common vertical shaft to extract cooking fumes generated in multiple kitchens, such as may be found in tower blocks or other buildings with multiple occupancy. The stack effect in a vertical shaft occurs when the inner and outer temperatures of the shaft are different. This impacts the indoor environment, energy consumption, and safety of the building. Despite this, there is a lack of research on the impact of the stack effect on residential cooking exhaust systems, which hinders efficient operation control and energy efficiency of the ventilation system. This study investigates the influence of the stack effect on the range hood's exhaust air amount in different climate zones, considering variations in shaft heights, concurrent usage rates, and temperature differentials. The results indicate that during summer in four climate zones in China, the stack effect has negligible impact on the range hood's exhaust air amount. Conversely, in winter, the stack effect leads to an increase in the range hood's exhaust air amount, resulting in higher fresh air volume. The higher the exhaust shaft, the greater the influence of the stack effect. The influence of stack effect can be disregarded for exhaust shafts below the sixth floor. A study of a 33-floor exhaust shaft system at a 51.5% concurrent usage rate, found that, stack effect can cause up to a 6.0% increase in heating heat consumption of the fresh air part for a 120 m2 near-zero energy consumption residence. There is a linear relationship between the exhaust air amount and the temperature differential. The proposed formula predicts the increase in the percentage of average exhaust air amount based on different temperature differential and exhaust shaft heights. This information serves as a valuable reference for optimizing control of kitchen exhaust shaft system. These findings can contribute to the efficient operation control and energy efficiency of ventilation systems in buildings.

An analytical model of stack ventilation in a shaft with controllable air volume

Evaluation of Stack Ventilation in a Large Space Using Zonal Simulation and a Reduced-Scale Model Experiment with Particle Image Velocimetry

Investigating the Impact of Stack Effect on Ventilation Performance of Residential Kitchen Exhaust Shaft System

Numerical Simulation of Ventilation Performance for Large-scale Underground Cavern Group Considering Effect of Ventilation Shaft Structure

Using the central ventilation shaft design within public buildings for natural aeration enhancement

Numerical Simulation of Thermal Pressure Ventilation in Building Atrial: A Case Study

Simulation Analysis of Longitudinal Ventilation System with Jet Fan Speed Control for MPC Strategy in a Road Tunnel

A hybrid ventilation scheme applied to bi-directional excavation tunnel construction with a long inclined shaft

Numerical analysis of different ventilation schemes during the construction process of inclined tunnel groups at the Changheba Hydropower Station, China

Study on A Multi-Layer Analytical Model of Natural Ventilation in Large Single-Cell Buildings

Numerical investigation on mechanisms and performance of column attachment ventilation for winter heating

A New Natural Ventilation Method for Fire-Induced Smoke Control in a Common Subway Station

A numerical analysis of airflows caused by train-motion and performance evaluation of a subway ventilation system

Reduced-scale Experimental Model and Numerical Investigations to Buoyance-Driven Natural Ventilation in a Large Space Building

Hybrid Ventilation in an Air-Conditioned Office Building with a Multistory Atrium for Thermal Comfort: A Practical Case Study

Optimization of ventilation efficiency in tunnel-type underground spaces using response surface methodology: a case study of Yunlong Mountain civil defense in Xuzhou

Effects of vertical shaft arrangement on natural ventilation performance during tunnel fires

Heat exchange modeling between the air flow and the metro ventilation shaft lining in the conditions of St. Petersburg, Russia

Computational fluid dynamics numerical simulation of flue gas emission from stack and tower integration system of coal-fired power plant

Influence of air intake from existing shafts on the safety of operating trains

Optimizing Natural Ventilation Design in A Large Factory Building Using Simulation