Abstract:Over four decades ago, pulsed-laser melting, or pulsed-laser annealing as it was termed at that time, was the subject of intense study as a potential advance in silicon device processing. In particular, it was found that nanosecond laser melting of the near-surface of silicon and subsequent liquid phase epitaxy could not only very effectively remove lattice disorder following ion implantation, but could achieve dopant electrical activities exceeding equilibrium solubility limits. However, when it was realised that solid phase annealing at longer time scales could achieve similar results, interest in pulsed-laser melting waned for over two decades as a processing method for silicon devices. With the emergence of flat panel displays in the 1990s, pulsed-laser melting was found to offer an attractive solution for large area crystallisation of amorphous silicon and dopant activation. This method gave improved thin film transistors used in the panel backplane to define the pixelation of displays. For this application, ultra-rapid pulsed laser melting remains the crystallisation method of choice since the heating is confined to the silicon thin film and the underlying glass or plastic substrates are protected from thermal degradation. This article will be organised chronologically, but treatment naturally divides into the two main topics: (1) an electrical doping research focus up until around 2000, and (2) optical doping as the research focus after that time. In the first part of this article, the early pulsed-laser annealing studies for electrical doping of silicon are reviewed, followed by the more recent use of pulsed-lasers for flat panel display fabrication. In terms of the second topic of this review, optical doping of silicon for efficient infrared light detection, this process requires deep level impurities to be introduced into the silicon lattice at high concentrations to form an intermediate band within the silicon bandgap. The chalcogen elements and then transition metals were investigated from the early 2000s since they can provide the required deep levels in silicon. However, their low solid solubilities necessitated ultra-rapid pulsed-laser melting to achieve supersaturation in silicon many orders of magnitude beyond the equilibrium solid solubility. Although infrared light absorption has been demonstrated using this approach, significant challenges were encountered in attempting to achieve efficient optical doping in such cases, or hyperdoping as it has been termed. Issues that limit this approach include: lateral and surface impurity segregation during solidification from the melt, leading to defective filaments throughout the doped layer; and poor efficiency of collection of photo-induced carriers necessary for the fabrication of photodetectors. The history and current status of optical hyperdoping of silicon with deep level impurities is reviewed in the second part of this article.

Silicon crystallization technique using 100-200mm long line beam with DPSS green lasers aimed for factory manufacturing of poly-Si TFT panels

Pulsed Excimer Laser Crystallization and Doping for the Fabrication of Poly-Si and -SiGe TFTs

Controlled Growth of High-Quality Poly-Silicon Thin Films with Huge Grains on Glass Substrates Using an Excimer Laser

Nonlinear Generation of a Neat Semi-Gaussian Laser Beam with a Transversely Varying Periodically-Poled LiTaO_3 Crystal

A Novel Two-Step Laser Crystallization Technique for Low-Temperature Poly-Si TFTs

High Performance Transparent In-Plane Silicon Nanowire Fin-Tfts Via A Robust Nano-Droplet-Scanning Crystallization Dynamics

Double-layer Fabrication Scheme for Large-Area Polymeric Photonic Crystal Membrane on Silicon Surface by Multibeam Interference Lithography

Unseeded Crystal Growth of (100)-Oriented Grain-Boundary-Free Si Thin-Film by a Single Scan of the CW-Laser Lateral Crystallization of a-Si on Insulator

Post-Processing Trimming of Silicon Photonic Devices Using Femtosecond Laser.

Electrical and Optical Doping of Silicon by Pulsed-Laser Melting

48.1: Inline Low Temperature Polycrystalline Silicon Roughness and Grain Size Metrology Enabled by Electron Beam Review for a Better Process Control of Excimer Laser Annealing

One-Step femtosecond laser irradiation of Single-Crystal Silicon: Evolution of Micro-Nano structures and damage investigation

[30-years of sport medicine and rehabilitation].

Ultrahigh-Performance Polycrystalline Silicon Thin-Film Transistors on Excimer-Laser-Processed Pseudo-Single-Crystal Films

Controllable Si micro-structuring by temporally modulated single-shot femtosecond pulse lithography

High-brightness scalable continuous-wave single-mode photonic-crystal laser

Single-crystal silicon transistors in laser-crystallized thin films on bulk glass

Green Laser Recrystallization of Poly-Sige Thin Films Deposited by RPCVD System

Multi-focal Picosecond laser vertical slicing of 6 inch 4H-SiC ingot

Surface Micromorphology and Nanostructures Evolution in Hybrid Laser Processes of Slicing and Polishing Single Crystal 4H-Sic

Centimeter-scale low-damage micromachining on single-crystal 4H–SiC substrates using a femtosecond laser with square-shaped Flat-Top focus spots