Abstract:With the goal of improving processability of imide oligomers and achieving of high temperature carbon fiber composite, a series of Thermosetting Matrix Resin solutions (TMR) were prepared by polycondensation of aromatic diamine (3,4′-oxybisbenzenamine, 3,4-ODA) and diester of biphenylene diacid (BPDE) using monoester of 4-phenylethynylphthalic acid (PEPE) as end-capping agent in ethyl alcohol as solvent to afford phenylethynyl-endcapped poly(amic ester) resins with calculated molecular weight (Calc’d Mw) of 1500–10,000. Meanwhile, a series of reactive diluent solutions (RDm) with Calc’d Mw of 600–2100 were also prepared derived from aromatic diamine (4,4′-oxybisbenzenamine, 4,4-ODA), diester of asymmetrical biphenylene diacid (α-BPDE) and monoester of 4-phenylethynylphthalic acid (PEPE) in ethyl alcohol. Then, the TMR solution was mixed with the RDm solution at different weight ratios to afford a series of A-staged thermosetting blend resin (TMR/RDm) solutions for carbon fiber composites. Experimental results demonstrated that the thermosetting blend resins exhibited improved melt processability and excellent thermal stability. After being thermally treated at 200 °C/1 h, the B-staged TMR/RDm showed very low melt viscosities and wider processing window. The minimum melt viscosities of ≤50 Pa·s was measured at ≤368 °C and the temperature scale at melt viscosities of ≤100 Pa·s were detected at 310–390 °C, respectively. The thermally cured neat resins at 380 °C/2 h showed a great combination of mechanical and thermal properties, including tensile strength of 84.0 MPa, elongation at breakage of 4.1%, and glass transition temperature (Tg) of 423 °C, successively. The carbon fiber reinforced polyimide composite processed by autoclave technique exhibited excellent mechanical properties both at room temperature and 370 °C. This study paved the way for the development of high-temperature resistant carbon fiber resin composites for use in complicated aeronautical structures.

Method of polyimide film preparation for application at high temperatures

Preparation and characterization of soluble heat-resistant polyimide films containing bis-N-phenyl-benzimidazole

Mesoporous polyetherimide thin films via hydrolysis of polylactide-b-polyetherimide-b-polylactide

Preparation and properties of polyimide films derived from hexaazatriphenylenehexacarboxylic acid trianhydride

LOW TEMPERATURE DEFORMATION AND STRENGTH OF POLYIMIDE FILMS DUE TO THICKNESS AND DEFORMATION SPEED

Study on Syntheses and Properties of Some Novel Polyimides Containing Bisthiazole Rings

Preparation and Characterization of Colorless High Temperature Resistant Polyimide Films

Preparation and Performance of Polyimide with Noncoplanar Structure

Thermally Stable and Mechanically Strong Mesoporous Films of Poly(ether Imide)-Based Triblock Copolymers

Preparation and properties of melt-processable polyimides based on fluorinated aromatic diamines and aromatic dianhydrides

Thermomechanical analysis of a segmented rigid-rod polyimide film

Polyimide Ionomer and Its Preparation Method

Preparation and characterization of PMR-type polyimides from furan-based diamines

High energy density of polyimide films employing an imidization reaction kinetics strategy at elevated temperature

Synthesis and Studies of Polyimide

Polymerization, Structure and Thermal Properties of Odpa-Dmb Polyimide Films

High thermal conductivity and low absorptivity/ emissivity properties of transparent fluorinated polyimide films

Improved Melt Processabilities of Thermosetting Polyimide Matrix Resins for High Temperature Carbon Fiber Composite Applications

Synthesis and characterization of fluorinated polyimides with high heat resistance and low dielectric constant

Optically Transparent and Thermal‐Stable Polyimide Films Derived from a Semi‐Aliphatic Diamine: Synthesis and Properties

Synthesis and Characterization of High Temperature Transfer Molding Polyimide Resins