Abstract:An effective design strategy for preparing highly transparent polyimide film with low dielectric constant is presented. The key to the strategy is to simultaneously introduce meta-substituted structure and trifluoromethyl in polymer chains. By using this design strategy, a highly transparent polyimide film with low-k was synthesized from 3,5-diaminobenzotrifluoride (m-TFPDA) and 4,4′-(hexafluoroisopropylidene) diphthalic anhydride (6FDA) through a two-step method. The obtained m-TFPDA/6FDA (CPI) film (∼30 µm) possesses high optical transparency (λcutoff=334 nm, T450nm=85.26%, Haze=0.31) and is close to colorless (L*=96.03, a*=−0.34, b*=2.12, yellow index=3.96). The intrinsic k and dielectric loss value of the film are 2.27 and 0.0013 at 10 kHz, respectively. More importantly, such low dielectric performance could remain stable up to 280 °C, and the film shows a low moisture rate (∼0.51%), which helps to maintain the low-k property stability in different humid environments. Meanwhile, the film also shows good thermal stability and mechanical properties, with a glass transition temperature (Tg) of 296 °C and the 5 wt% decomposition temperature (Td,5%) of 522 °C under N2. The tensile strength and tensile modulus of the film are 85.1 MPa and 1.96 GPa, respectively. In addition, the film is soluble in common solvents, which allows simple solution processing and low-cost, continuous roll-to-roll processes. This design strategy is beneficial to improving the transparency, lightening yellow color, lowering the dielectric constant and meanwhile maintaining the comprehensive properties of polyimide films, which is mainly due to the introduced meta-substituted and trifluoromethyl structures effectively inhibiting the transfer of charge transfer complex (CTC) effects and increasing the free volume of film. This design strategy could also be extended to other high-performance polymer systems.

High thermal conductivity and low absorptivity/ emissivity properties of transparent fluorinated polyimide films

Preparation and Properties of Pale‐colored and Optically Transparent Fluoro‐containing Polyimide Films with Low Solar Absorptivity and Enhanced High‐temperature Dimensional Stability for Potential Applications in Space Environments

High comprehensive properties of colorless transparent polyimide films derived from fluorine-containing and ether-containing dianhydride

Highly Transparent and Colorless Polyimide Film with Low Dielectric Constant by Introducing Meta-substituted Structure and Trifluoromethyl Groups

Effect of simultaneously introduced bulky pendent group and amide unit on optical transparency and dimensional stability of polyimide film

Synthesis and characterization of fluorinated polyimides with high heat resistance and low dielectric constant

Preparation and characterization of highly heat-resistant, soluble, and hydrophobic fluorinated polyimides with gas transport properties

Reduced coefficient of linear thermal expansion of colorless and transparent polyimide by introducing rigid-rod amide unit: synthesis and properties

Dielectric Properties of Fluorinated Aromatic Polyimide Films with Rigid Polymer Backbones

Thermally Stable and Transparent Polyimide Derived from Side‐Group‐Regulated Spirobifluorene Unit for Substrate Application

Synthesis and Properties of Optically Transparent Fluoro-Containing Polyimide Films with Reduced Linear Coefficients of Thermal Expansion from Organo-Soluble Resins Derived from Aromatic Diamine with Benzanilide Units

Ultralow Coefficient of Thermal Expansion and a High Colorless Transparent Polyimide Film Realized Through a Reinforced Hydrogen-Bond Network by In Situ Polymerization of Aromatic Polyamide in Colorless Polyimide

Polyimide Films Based on β-Cyclodextrin Polyrotaxane with Low Dielectric and Excellent Comprehensive Performance

Construction of fluorenyl‐modified low dielectric constant polyimide films with excellent mechanical properties and optical transparency

Synthesis and properties of polyimides from a diamine containing side diphenylphosphine oxide and trifluoromethyl groups

Influence of direct fluorination treatment on surface and optical properties of colorless and transparent polyimides

Synthesis of UV-resistant and colorless polyimide films for optoelectrical applications

Colorless Poly(amide-imide)s with Low Dielectric Constants and Enhanced Mechanical Properties through Tri-Armed Cross-Linkers

Synthesis of colorless transparent poly(amide-imide) with high modulus and low thermal expansion coefficient and its performance study

Thermal-Optical Properties Based on the Fluorine-Containing Polyimide

Synthesis and Characterization of Novel Fluorinated Polyimides Derived from 4-Phenyl-2,6-bis[4-(4′-amino-2′-trifluoromethyl-phenoxy)phenyl]pyridine and Dianhydrides