Abstract:Here, a rapid, low-temperature yet effective micro-inverted structuring of silicon (Si) via a low thermal budget copper catalyzed chemical etching (CuCCE) has been demonstrated for efficient hybrid heterojunction solar cells (HSCs) based on poly (3,4-ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT:PSS)/Si in the basic device design 'Ag/PEDOT:PSS/n-Si/In:Ga'. The inverted pyramidal (IP) arrays have been obtained on a large area of the partially polished (PP) Si surface by the CuCCE in etch bath consisting of Cu(NO 3 ) 2 /HF/ H 2 O 2 in 100 mM:4.5 M:1.5 M at room temperature (30 °C). The IP-Si shows significantly reduced total surface reflectance ( 30 %) for broad spectral range. The high efficiency device on the interconnected IP-Si surface shows power conversion efficiency (PCE) >10.75 % which is direct enhancement of ∼4 folds (absolute) when compared with the HSCs made on the PP-Si surface. Such high efficiency HSCs employing the CuCCE based inverted structured solar grade Si surface and detailed analyses of PEDOT:PSS/Si interface have rarely been addressed. The junction property has been studied with the help of Nyquist plots and Mott-Schottky (C-V) analyses of impedance sepctroscopy. A direct 2.9 fold enhancement in the recombination resistance along with high barrier potential found for the optimized IP-Si structured HSCs facilitated the improved junction and minimum recombination at the PEDOT:PSS/n-Si interface. The enhanced PCE is primarily attributed to improved light harvesting ability of the IP-Si surface, junction and passivation properties with conformal coverage of the PEDOT:PSS layer. The study will help to explore the high potential of the CuCCE based IP-Si surfaces for future high efficiency devices.

Surface Micro-/Nanotextured Hybrid PEDOT:PSS-Silicon Photovoltaic Cells Employing Kirigami Graphene

Embedded Surface Relief Gratings by a Simple Method to Improve Absorption and Electrical Properties of Polymer Solar Cells.

Flexible Silver Grid/Pedot:Pss Hybrid Electrodes for Large Area Inverted Polymer Solar Cells

Pyramid‐Textured Antireflective Silicon Surface In Graphene Oxide/Single‐Wall Carbon Nanotube–Silicon Heterojunction Solar Cells

Performance Improvement of Graphene/Silicon Solar Cells via Inverted Pyramid Texturation Array

Enhanced Charge Extraction in Inverted Hybrid Photovoltaic Cells Assisted by Graphene Nanoflakes

Silicon Nanocrystal Conjugated Polymer Hybrid Solar Cells with Improved Performance

Nanostructural Optimization Of Silicon/Pedot: Pss Hybrid Solar Cells For Performance Improvement

Rapid and low temperature micro inverted pyramid texturing of silicon via copper catalyzed chemical etching for high efficiency PEDOT:PSS/silicon hybrid solar cells

Hybrid inverted organic photovoltaic cells based on nanoporous TiO2 films and organic small molecules

Titanium Dioxide (TiO2) Sensitized Zinc Oxide (ZnO)/Conducting Polymer Nanocomposites for Improving Performance of Hybrid Flexible Solar Cells

High‐Performance Graphene/GaInP Solar Cell Prepared by Interfacial Chemical Modification with Poly(3,4‐Ethylenedioxythiophene):Poly(styrenesulfonate)

Flexible silver nanowire meshes for high-efficiency microtextured organic-silicon hybrid photovoltaics

High-Performance Bendable Organic Solar Cells with Silver Nanowire-Graphene Hybrid Electrode

Multifunctioning Graphene Oxide Capping Layer for Highly Efficient and Stable PEDOT:PSS-Silicon Hybrid Solar Cells

Pyrenebutyrate-functionalized graphene/poly(3-octyl-thiophene) nanocomposites based photoelectrochemical cell

Silver Nanowire–graphene Hybrid Transparent Conductive Electrodes for Highly Efficient Inverted Organic Solar Cells

Silicon Nanowires Incorporated Efficient and Flexible PEDOT:PSS/Silicon Hybrid Solar Cells

Semitransparent Organic Solar Cells With Hybrid Monolayer Graphene/Metal Grid As Top Electrodes

Silicon/Organic Hybrid Solar Cells with 16.2% Efficiency and Improved Stability by Formation of Conformal Heterojunction Coating and Moisture‐Resistant Capping Layer

Highly Efficient Organic/Silicon Hybrid Solar Cells with a MoO3 Capping Layer