Abstract:Inverted perovskite solar cells (PSCs) with PEDOT:PSS as hole transporting layers exhibit tremendous prospects for flexible photovoltaic applications owing to their characteristics of low-temperature solution processability and favorable flexibility. Nevertheless, the energy level mismatch of PEDOT:PSS and perovskite layer results in a severe energy deficit. In addition, the acidity of PEDOT:PSS is detrimental to the stability of devices. To address these issues, we employ a glyceryl monostearate (GMS) interlayer to improve the work function and conductivity of PEDOT:PSS. Meanwhile, it can passivate the traps at the interface of PEDOT:PSS/perovskite. As a consequence, the champion power conversion efficiencies of photovoltaic devices based on MAPbI3 films increase from 14.82% to 17.29% due to the surface modification of PEDOT:PSS with GMS, which is mainly ascribed to the enhanced open-circuit voltage and short-circuit current density. Furthermore, the nonencapsulated MAPbI3 perovskite films and devices based on GMS-modified PEDOT:PSS show much better moisture stability and thermal stability than the counterparts without GMS modification.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c03249?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c03249</a>.WF of the PEDOT:PSS film via KPFM and UPS measurements; transmission spectra of the PEDOT:PSS film; AFM images of the PEDOT:PSS film without and with GMS treatment; SEM images of the MAPbI3 films; contact angles; fwhm of the XRD diffraction peaks; UV–vis spectra and PL spectra of MAPbI3 films deposited on different substrates; J–V curves of the electron-only and hole-only devices under the dark condition; electron and hole mobility of the perovskite films; photovoltaic parameters; schematic of energy level alignment; integrated JSC obtained from the EQE; stability characterization (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c03249/suppl_file/ae0c03249_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High‐Performance Graphene/GaInP Solar Cell Prepared by Interfacial Chemical Modification with Poly(3,4‐Ethylenedioxythiophene):Poly(styrenesulfonate)

Highly Efficient Organic Solar Cells Enabled by the Incorporation of a Sulfonated Graphene Doped PEDOT:PSS Interlayer

High-Efficiency Silicon/Organic Heterojunction Solar Cells with Improved Junction Quality and Interface Passivation

High-Efficiency Si/PEDOT:PSS Hybrid Heterojunction Solar Cells Using Solution-Processed Graphene Oxide As an Antireflection and Inversion-Induced Layer

High Efficient Solar Cell Based on Heterostructure Constructed by Graphene and GaAs Quantum Wells

Tunable Graphene/Indium Phosphide Heterostructure Solar Cells

Double-Layered PEDOT:PSS Films Inducing Strong Inversion Layers in Organic/Silicon Hybrid Heterojunction Solar Cells

18.5% Efficient Graphene/gaas Van Der Waals Heterostructure Solar Cell

Interface Engineering of a Compatible PEDOT Derivative Bilayer for High‐Performance Inverted Perovskite Solar Cells

Enhancing the Performance of Planar Heterojunction Perovskite Solar Cells Using Stable Semiquinone and Amine Radical Modified Hole Transport Layer

Over 16% Efficiency Organic/nanostructured Si Heterojunction Solar Cells with a P-Doped Organic Small Molecule Layer

Buffer Layer Of Pedot:Pss/Graphene Composite For Polymer Solar Cells

High Performance Nanostructured Silicon-Organic Quasi P-N Junction Solar Cells Via Low-Temperature Deposited Hole and Electron Selective Layer.

High Performance Silicon–organic Hybrid Solar Cells Via Improving Conductivity of PEDOT:PSS with Reduced Graphene Oxide

Structural Design and Simple Posttreatment of the Hole Transport Layer to Improve Performance of Hybrid Solar Cells

Multifunctioning Graphene Oxide Capping Layer for Highly Efficient and Stable PEDOT:PSS-Silicon Hybrid Solar Cells

Polymer Photovoltaic Cells Based on Solution‐Processable Graphene and P3HT

Enhancing the Photovoltaic Performance of GaAs/graphene Schottky Junction Solar Cells by Interfacial Modification with Self Assembled Alkyl Thiol Monolayer

PEDOT:PSS Modification by blending graphene oxide to improve the efficiency of organic solar cells

13.7% Efficiency Graphene–gallium Arsenide Schottky Junction Solar Cells with a P3HT Hole Transport Layer

Surface Modification of PEDOT:PSS for Enhanced Performance of Inverted Perovskite Solar Cells