The Friction-Induced Vibration of Water-Lubricated Rubber Bearings during the Shutdown Process

Guangwu Zhou,Peng Li,Daxin Liao,Yuhao Zhang,Ping Zhong

DOI: https://doi.org/10.3390/ma13245818

IF: 3.4

2020-12-20

Materials

Abstract:The vibration noise generated by water-lubricated rubber bearings (WLRBs) seriously reduces the concealment of a ship’s navigation. The purpose of this study was to obtain the relationships between friction-induced vibration and the friction coefficient, specific pressure, temperature, and stiffness of the bearing support during the shutdown process of WLRBs. Using transient dynamic analysis (Abaqus/Standard), the shutdown process of the bearing system was simulated by setting a friction coefficient curve, and with the fast Fourier transform (FFT), the data in the time domain were then converted to the frequency domain. In addition, an orthogonal table was applied to select the best level for each factor. The results show that proportionally increasing the friction coefficient and specific pressure caused higher vibrations, and the effect of the specific pressure on vibration is more prominent than that of the friction coefficient. Higher temperatures led to an increase in the peak frequency of noise (squeal) and the virtual value of acceleration. Increasing the stiffness of the bearing support decreased the higher-frequency squeal but dramatically increased the lower-frequency chatter. The results of the study are of guiding significance for the improvement of research methods and the optimization of the materials and structures of WLRBs.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering

What problem does this paper attempt to address?

The problem that this paper attempts to address is the issue of vibration noise caused by friction in water-lubricated rubber bearings (WLRBs) during shutdown. Specifically, the study aims to explore the relationship between factors such as the coefficient of friction, unit pressure, temperature, and bearing support stiffness with friction-induced vibration, in order to reduce vibration noise during ship navigation and improve its stealth. Through transient dynamic analysis (using Abaqus/Standard software), the shutdown process of the bearing system was simulated, and time-domain data was converted to frequency-domain data using Fast Fourier Transform (FFT). Additionally, an orthogonal array was applied to select the optimal level for each factor. The study shows that an increase in the coefficient of friction and unit pressure leads to higher vibration, with unit pressure having a more significant impact on vibration than the coefficient of friction. An increase in temperature raises the peak frequency of noise and the virtual value of acceleration, while increasing bearing support stiffness reduces high-frequency squeal but significantly increases low-frequency flutter. These results provide guidance for improving research methods and optimizing the materials and structure of WLRBs.