Abstract:Studying rotor-bearing systems involving fluid film bearings is essential for designing and assessing the dynamic responses and performance of rotating machinery. They are involved in many applications such as pumps, turbines, and engines. Water-lubricated bearings are often used in many applications where the use of oil-based lubricants is not desirable, such as in environmentally sensitive areas such as water desalination. In this study, dynamic analysis is performed to identify the stability regions that prevent the application of water-lubricated journal bearings. This is achieved by solving the system equations of motion and then using an infinitesimal perturbation method to evaluate the second-order bearing coefficients of a journal bearing. In this paper, a steel shaft supported by two symmetrical journal bearings was used to investigate the system stability analysis. A test rig is designed and manufactured to examine the rotor's dynamic behavior and verify the theoretical outcomes of the FE model, utilizing the bearing coefficients based on second-order analysis. Furthermore, this study compares the two fluids, both theoretically and experimentally, investigating their impact on the rotor-bearing system at different rotational speeds. The theoretical findings indicate that the threshold speed for journal bearings is significantly higher when using water as the lubricant fluid film compared to using oil as the lubricant fluid. Additionally, because of the low viscosity of water, water-lubricated bearings are susceptible to significant wear and noise in operating conditions. Our experiments show that an oil lubricant provides less response than a water lubricant for unbalanced rotors within the tested speed range.

Toward diagnostics of water-lubricated bearings of naval vessels by vibration analysis

A Review of the Design and Feasibility of Intelligent Water-Lubrication Bearings

Monitoring of Lubricant Film Failure in a Ball Bearing Using Ultrasound

A model-based technique to identify lubrication condition of hydrodynamic bearings using the rotor vibrational response

Lubrication and stability analysis of nonlinear rotor-bearing system

Theoretical and experimental study on the fluid-structure-acoustic coupling dynamics of a new water lubricated bearing

New health indicators for the monitoring of bearing failures under variable loads

Friction-Induced Vibration and Noise in Water-Lubricated Stern Bearings: A Comprehensive Review of Mechanisms and Design

A Comparative Study of Theoretical and Experimental Analysis on Balanced and Unbalanced Rotors Supported by Oil- and Water-Lubricated Journal Bearings

Detection of sub-surface damage in wind turbine bearings using acoustic emissions and probabilistic modelling

Experimental Study on Condition Diagnosis of Sliding Bearings Based on Acoustic Emission Detection

The Friction-Induced Vibration of Water-Lubricated Rubber Bearings during the Shutdown Process

Fault Diagnosis Research of Oscillatory Solid-Lubricated Rolling Bearing

Advancing bearing fault diagnosis under variable working conditions: a CEEMDAN-SBS approach with vibro-electric signal integration

Nonlinear Vibration Induced by the Water-Film Whirl and Whip in a Sliding Bearing Rotor System

Bearing Failure Analysis Using Vibration Analysis and Natural Frequency Excitation

Journal Bearing Performance Prediction Using Machine Learning and Octave-Band Signal Analysis of Sound and Vibration Measurements

Film-Thickness Identification Method and Lubrication Characteristic Experiment of Full-Size Water-Lubricated Stern Bearing under Offset Load

Dynamic behavior of large faults toward severity estimation in bearings

Simulation and experimental investigations on water-lubricated squeeze film damping stern bearing

Early Fault Diagnostic System for Rolling Bearing Faults in Wind Turbines