Abstract:The reduced graphene oxide (rGO) is first introduced into the matrix to modify the microstructure for enhancing carrier mobility, which leads to improved electrical conductivity. Next, the donor dopant Nb is chosen to substitute Bi for increasing carrier concentration, thus further improving electrical conductivity. Finally, a record‐breaking ZTmax ≈0.5 at 873 K is achieved in Bi5.91Nb0.09Cu2Se3.6Cl0.4O6 + 0.5% rGO. Bi6Cu2Se4O6 is considered as an ideal n‐type thermoelectric material to pair with p‐type BiCuSeO for preparing oxyselenide‐based thermoelectric devices, but its thermoelectric performance is limited by poor electrical conductivity. In this research, the reduced graphene oxide (rGO) nanosheets are introduced into Bi6Cu2Se3.6Cl0.4O6 matrix through liquid‐phase shear exfoliation to modify the microstructure. rGO can insert into matrix grains as intercalations, or embed into grain boundaries as wetting phase, and prompt grain alignment, which contributes to the significantly enhanced carrier mobility, thus leading to an improvement in electrical conductivity from ≈15 S cm−1 to ≈230 S cm−1 at 303 K. Whereafter, the effective donor dopant Nb is chosen to substitute Bi. The carrier concentration is increased without damaging the carrier mobility, resulting in a further improved electrical conductivity of ≈840 S cm−1 at 303 K. Lattice thermal conductivity is also suppressed owing to the intensive phonon scattering by point defects and grain boundaries. Ultimately, a record‐breaking peak ZT ≈0.5 (873 K) and average ZT ≈0.3 (303–873 K) can be achieved in Bi5.91Nb0.09Cu2Se3.6Cl0.4O6 + 0.5% rGO. The microstructure optimization method in this research effectively improves thermoelectric performance, and is anticipated to be applied in other thermoelectrics.

Thermoelectric Properties of Reduced Graphene Oxide/Bi2Te3 Nanocomposites

Synthesis of Thermoelectric Nanocomposites by Incorporating Reduced Graphene Oxide

Boosting the thermoelectric performance of n-type Bi2S3 by compositing rGO

Electrodeposition of Bi2Te3 and Bi2Te3/reduced GO thin film thermoelectric materials in dimethyl sulphoxide

Enhanced Thermoelectric Performance of Bi2Te3 Based Graphene Nanocomposites

Enhanced thermoelectric properties of In-filled Co4Sb12 by dispersion of reduced graphene oxide

Simultaneous Increase in Conductivity and Phonon Scattering in a Graphene Nanosheets/(bi 2 Te 3 ) 0.2 (sb 2 Te 3 ) 0.8 Thermoelectric Nanocomposite

Microstructure Optimization in the Shear‐Exfoliated Bi6Cu2Se4O6 through Introducing Reduced Graphene Oxide Leads to Wide‐Ranged Thermoelectric Performance

Enhanced Thermoelectric Properties of Graphene/Cu3SbSe4 Composites

Thermoelectric Transport Properties of Interface-Controlled p-type Bismuth Antimony Telluride Composites by Reduced Graphene Oxide

Graphitic carbon nitride-bismuth antimony telluride nanocomposites: A potential material for thermoelectric applications

Enhanced thermoelectric properties and thermal stability of Cu1.8S-rGO nanocomposite by low energy carrier filtering effect

Construction of a 3D-Rgo Network-Wrapping Architecture in a YbyCo4Sb12/rGO Composite for Enhancing the Thermoelectric Performance

Thermoelectric Properties of PbTe-based Graphene Nanocomposite

Thermoelectric Properties of Solution-Synthesized N-Type Bi2te3 Nanocomposites Modulated by Se: an Experimental and Theoretical Study

Enhancing the thermoelectric properties for hot-isostatic-pressed Bi2Te3 nano-powder using graphite nanoparticles

Effects of Preparation Methods on the Thermoelectric Performance of SWCNT/Bi2Te3 Bulk Composites

Enhanced Thermoelectric Properties of N-Type Bi2te3-Based Nanocomposite Fabricated by Spark Plasma Sintering

Synthesis and Thermoelectric Properties of Bi2te3 Based Nanocomposites

Enhanced Thermoelectric Performance of CuGaTe2 Based Composites Incorporated with Graphite Nanosheets

Graphene Quantum Dots Embedded in Bi2Te3 Nanosheets to Enhance Thermoelectric Performance