Abstract:The proposed WPT system: (A) The circuit configuration; (B) The inverter waveforms. Green and red lines are overlapped with black and red lines, respectively, for vS and i2 . All lines are overlapped for vg and it; and (C) The receiver waveforms. Blue and red lines are overlapped with black and green lines, respectively, except VOn . All lines are overlapped for VOn . This paper proposes a high‐frequency multiple‐receiver wireless power transfer (WPT) system with a load‐independent class‐E/F inverter. Each receiver has a post‐regulator, which changes the equivalent resistance seen from the inverter to obtain the necessary power for output voltage regulation. Because the load‐independent class‐E/F inverter generates constant AC current ( CCAC ), the transmitter supplies the minimum required power to the receivers by the change of the equivalent resistances. Besides, the load‐independent inverter consistently achieves zero‐voltage switching (ZVS) without any control. As a result, no information feedback by wireless communication is necessary for output regulation and ZVS achievement, simplifying the system configuration and improving the transient response of the control. This paper presents analytical expressions of the proposed system. Besides, the experiment was carried out with a two‐receiver WPT system. The implemented system worked well by individual and independent output regulation of the post regulator at each receiver. The implemented WPT system achieved the power‐delivery efficiency of 83.4% at the 6.78 MHz transmission frequency and the total output power of 40 W.

Analysis and Design of High-Frequency WPT System Using Load-Independent Inverter With Robustness Against Load Variations and Coil Misalignment

Design and Optimization of a Modular Wireless Power System Based on Multiple Transmitters and Multiple Receivers Architecture

A Reconfigurable Resonant Topology of Wireless Power Transfer Systems with Large Coupling Ranges

Design and Optimization of a Wireless Power Transfer System with a High Voltage Transfer Ratio

Analysis and design of high‐frequency multiple‐output wireless power transfer system with load‐independent class‐E/F inverter

Analysis and Implementation of Inverter Wide-Range Soft Switching in WPT System Based on Class E Inverter

Analysis and Design of Load-Independent Series Resonant Power Amplifier With Constant Current Output and Its Application for WPT System

Analysis and Design of Single-Ended Resonant Converter for Wireless Power Transfer Systems

A Design Method for Large-Coupling-Range Series-Series Compensated WPT Systems under Practical Constraints

A Wireless Power Transfer System With High Misalignment Tolerance Based on Dual Side Variable Inductor Control

Realization of an Optimum Load for Wireless Power Transfer System

A Wide-Load-Range and Compact MHz Wireless Power Transfer System Based on Novel Reactance Compression Design and Edge Inductor

A Multi-Inverter High-Power Wireless Power Transfer System with Wide ZVS Operation Range

Design of a Constant-voltage Output Wireless Power Transfer Device

Analysis and Design of a Cost-Effective Single-Input and Regulatable Multioutput WPT System

A Wireless Power Transfer System with High Misalignment Tolerance and Low Component Count

Analysis and design of a high‐efficiency three‐coil WPT system with constant current output

An LC/S Compensation Topology and Coil Design Technique for Wireless Power Transfer

Analysis and Design of A Robust Class $E^2$ DC–DC Converter for Megahertz Wireless Power Transfer

Study of a Magnetic Coupling Resonant Wireless Power Transfer System

A Three-Resonator Wireless Power Transfer System with Constant-Output Feature Within a Misalignment Range