Abstract:Frequency control of series-series compensated inductive power transfer links (SS-IWPTL) operated in sub-resonant region while feeding variable voltage-type loads (e.g. batteries) with constant current under uncertain coupling conditions allows to minimize volt-ampere (VA) rating of transmitting-side converter. In such systems, variations of coupling coefficient and load voltage are counteracted by operational frequency adjustment so that primary current magnitude remains nearly unchanged throughout the complete operational range, as opposed to input voltage and phase shift control approaches. In practice, allowable operational frequency band is typically restricted by certain application and/or standard (e.g. SAE J2954). As a result, tolerable load voltage span and coupling coefficients range are also limited. Classical design guidelines impose the resonant frequency of SS-IWPTL to coincide with the upper bound of allowable operational frequency band for operation with the minimum expected coupling coefficient and the lower bound corresponding to operation with the maximum expected coupling coefficient. The paper demonstrates that generalizing this approach by releasing the former constraint adds a degree of freedom, allowing to expand tolerable coupling coefficients range for a given operational frequency band at the expense of slight efficiency deterioration. Analytical relations describing the above-mentioned behavior are established, clearly indicating the arising trade-offs. Simulation and experiments validate the proposed methodology.

A Frequency Tuning Series-Series WPT System with Wide Coupling and Load Ranges

Wireless Power Transfer with Additional Third Harmonic: Theoretical Analysis, Design, and Demonstration

A Reconfigurable Resonant Topology of Wireless Power Transfer Systems with Large Coupling Ranges

Analysis and Design of Wireless Charging Systems Without Extra Components for Load-Independent Constant Current and Voltage Battery Charging

Optimal parameters design for series-series resonant converter for wireless power transfer

A Design Method for Large-Coupling-Range Series-Series Compensated WPT Systems under Practical Constraints

Design of an Inductive Power Transfer System with Constant Current and Constant Voltage Outputs Based on Multi-frequency Circuit

Coil-Splitting Based Dynamic WPT with Multiple Transmitter Coils in Parallel

A Method of Resonant Frequency Optimized Selection for a SP Inductive Coupled Power Transfer System

A Dual Frequency Tuning Method for Improved Coupling Tolerance of Wireless Power Transfer System

An Integrated Double-Sided LCC Compensation Based Dual-Frequency Compatible WPT System with Constant-Current Output and ZVS Operation

Reconfigurable Resonant Topology Linking Two-, Three-, and Four-Coil Modes for WPT with Large Coupling Range and Fixed Frequency

Design and Implementation of a High-Power Modular WPT System

Variable-Frequency Retuned WPT System for Power Transfer and Efficiency Improvement in Dynamic EV Charging With Fixed Voltage Characteristic

Design and Optimization of a Wireless Power Transfer System with a High Voltage Transfer Ratio

A MCR‐WPT system based on LCL‐S/P hybrid compensation network with CC/CV and maximum power optimization suiting for battery charging

Increasing tolerable coupling coefficients range of series-series compensated inductive wireless power transfer systems operating in restricted sub-resonant frequency region with constant current output

A three-phase WPT system with self-regulation of phase sequence

Enhancing Misalignment Tolerance in Hybrid Wireless Power Transfer System With Integrated Coupler via Frequency Tuning

A Novel Impedance Matching of Class DE Inverter for High Efficiency, Wide Impedance WPT System

A Three-Resonator Wireless Power Transfer System with Constant-Output Feature Within a Misalignment Range