Abstract:Wireless Power Transfer (WPT) brings convenience and safety in many applications and serves as a research hot spot in recently years. Magnetic resonant coupling is widely implemented in WPT applications such as mobile devices and electric vehicles where large distance, large power amount and high efficiency are the three key requirements in real application. However, there are always trade-offs between these requirements even in theory. Former literatures failed to illustrate the complete relationships between these requirements. Based on the phasor analysis, this paper illustrates the operating principle of the whole circuit, attains the equivalent circuit models of the system and derives the physical essence of frequency characteristics. Then Maximum Efficiency Conditions (MEC), which achieves the maximum efficiency without sacrificing the requirements for power transfer distance and power amount, is summarized. It should be noted that the highest efficiency is achieved at the natural frequency of the receiver, instead of any split frequencies of the coupled resonances. Following the MEC, a WPT prototype was designed, which was composed of a full bridge inverter, a LC resonant transmitter, a LC resonant receiver and a full bridge rectifier. The resonant frequency of the transmitter was designed to be slightly lower than the inverter operation frequency-446kHz to make an inductive load for the inverter so that all the MOSFETs operated in Zero-Voltage-Switching (ZVS) condition. For the experimental results, 300 W output power was obtained over a distance of 22cm with 84% overall efficiency.

Realization of an Optimum Load for Wireless Power Transfer System

A study of the self-coupling magnetic resonance coupled wireless power transfer

Design and Optimization of a Modular Wireless Power System Based on Multiple Transmitters and Multiple Receivers Architecture

Basic Principles of Point-to-Point Omnidirectional Wireless Power Transfer System

A Reconfigurable Resonant Topology of Wireless Power Transfer Systems with Large Coupling Ranges

Position Optimization of Maintaining Stable Transfer for Dynamic Dual-Rx WPT System

Reconfigurable Resonant Topology Linking Two-, Three-, and Four-Coil Modes for WPT with Large Coupling Range and Fixed Frequency

The Efficiency Characteristics Analysis and Optimization of the Magnetic Resonance Wireless Power Transmission to Multiple Receivers

Optimal Charging Method For Mismatched Transceiver Coils In Wireless Power Transfer

Optimal Position of the Intermediate Coils in a Magnetic Coupled Resonant Wireless Power Transfer System

Modeling and Optimization of The Four-Coil Wireless Power Transfer System.

Multi-coil Constant Voltage Output Analysis Based on State Deconstruction for Wireless Power Transfer System

Study on Efficiency Maximization Design Principles for Wireless Power Transfer System Using Magnetic Resonant Coupling

Study of a Magnetic Coupling Resonant Wireless Power Transfer System

Analysis and Optimization of a Three-Coil Coupler Based WPT System Featuring High Efficiency and Misalignment Tolerance

Quantitative Analysis of System Efficiency and Output Power of Four-Coil Resonant Wireless Power Transfer

Research and Application of Dual-Load Wireless Power Transmission System

An Eight-Coil Wireless Power Transfer Method for Improving the Coupling Tolerance Based on Uniform Magnetic Field

Impedance Matching Through a Reconfigurable Relay Coil Achieving Maximum Wireless Power Transfer under Variations of Coupling Coefficient and Load Resistance

Optimal Coil Design and Control Strategy for a High-power and Medium-frequency Wireless Power Transfer System

A Study on the Optimal Magnetic Beam Forming of Coil Arrays for Long Distance Wireless Power Transmission