The toxic factors in experimental traumatic shock; shock accompanying muscle ischemia and loss of vascular fluid.

S. Kety,I. Nathanson

IF: 19.456

Journal of Clinical Investigation

Abstract:

What problem does this paper attempt to address?

The Safety Assessment of Irrigation Fluid Management for Shoulder Arthroscopy and Its Effect on Postoperative Efficacy

Chengyu Zhuang,Renhao Yang,Yang Xu,Yanyan Song,Yin Zhang,Jingfeng Liu,Fan Yang,Xiaohong Huang,Jia Liu,Xiaoning Wang,Ying Wang,Lei Wang

DOI: https://doi.org/10.1111/os.13619

2023-01-01

Orthopaedic Surgery

Abstract:ObjectiveFluid extravasation is a potentially dangerous complication associated with shoulder arthroscopy. Most relevant studies have involved respiratory system, while the primary purpose was to reveal the effects of the fluid extravasation on cardiovascular system and postoperative function.MethodsThe clinical data of 92 patients was retrospective analyzed, in which 84 cases with rotator cuff injury, three cases with shoulder instability, three cases with fractures of the greater tuberosity of the humerus, and two cases with frozen shoulder. All the patients were undergoing shoulder arthroscopy. The relationship between the basic information of the patients and cardiac index (CI) or pulse pressure variation (PPV) were evaluated by linear regression analysis. The change of CI or PPV at different states were evaluated by the one‐way analysis of variance. The liquid retention (TR) and postoperative clinical outcomes was analyzed using linear regression.ResultsThe preoperative CI was affected by anesthesia status and body position, while PPV was not affected. Multivariate mixed‐effects model analysis of CI found that there was a statistically significant difference in groups of older than 55 years old and those with obesity (BMI > 24). After the operation, the retention of irrigation fluid significantly influenced the circumference of the deltoid (P < 0.001 (95%CI: [0.30, 1.00])), but not on the circumference of the deltoid, neck, and arm. The multivariate analysis of the American Shoulder and Elbow Surgery (ASES) scores at 3 and 6 months after surgery showed that the fluid retention volume was correlated with the ASES score at 3 months after surgery, especially when the retention volume was greater than 2 L (P = 0.001 (95%). %CI: [−12.49, −3.22]).ConclusionThe retention of irrigation fluid after shoulder arthroscopic surgery causes swelling of local limbs, and has an effect on peripheral blood vessels, which is mainly reflected in its influence on PPV and the postoperative function. Therefore, surgeons need to improve their surgical technique, shorten the operation time and reduce fluid retention.
Diagnosis of traumatic shoulder arthrotomies using saline load test with intra-articular pressure monitoring

Matthew Belton,Naomi Kelley,Todd Baldini,Joshua Steward,Nicholas Alfonso

DOI: https://doi.org/10.1007/s00590-022-03404-x

Abstract:Purpose: The purpose of this study was to investigate the amount of saline required to identify a positive traumatic shoulder arthrotomy in a cadaveric model. In addition, intra-articular pressure monitoring was conducted to confirm needle placement and evaluate peak pressure curves prior to capsular failure. Methods: We conducted a cadaveric study using thirty fresh-frozen upper extremities with maintained glenohumeral joint. A shoulder arthrotomy was made in the deltopectoral interval using a 4.4-mm trocar. The joint was loaded using an 18-gauge spinal needle inserted posteriorly and attached to a pressure monitoring system. Fluid was introduced at a uniform rate of 1 cc/sec until active extravasation was visualized from the anterior arthrotomy site. Statistical analysis included assessment of distribution, ANOVA and linear regression. Results: A positive joint challenge was obtained in all specimens (n = 30) within a maximum of 59 ml of fluid (mean 28 ml, STD 15.4). Average intra-articular pressure at visualization (PAV) was 166.8 mmHg (min., 107; max., 268). In twelve specimens, peak pressures (PP) exceeded PAV, showing a corresponding fall in pressure prior to visualization (ΔPP-PAV = 16.5). To reach a sensitivity of 90% and 95% of arthrotomies, 50 and 58 ml of fluid had to be injected. Conclusion: Results demonstrated 58 ml of fluid was required to identify a majority of shoulder arthrotomies. Intra-articular pressure monitoring identified successful needle placement. Pressure curve analysis could identify capsular failure before fluid extravasation visualization which could enhance clinical identification and treatment of traumatic shoulder arthrotomies. Level of evidence: Level IV Diagnostic.
The investigation of fluid flow in cartilage contact gap

JinJing Liao,David W Smith,Saeed Miramini,Namal Thibbotuwawa,Bruce S Gardiner,Lihai Zhang,David W. Smith,Bruce S. Gardiner

DOI: https://doi.org/10.1016/j.jmbbm.2019.04.008

IF: 4.042

2019-07-01

Journal of the Mechanical Behavior of Biomedical Materials

Abstract:<h2>Abstract</h2><p>Synovial fluid flow in articular joint capsule plays an important role during mixed mode lubrication. However, the actual fluid flow behaviour during cartilage contact has not been fully understood so far. This is due to the difficulties in measuring the gap permeability using conventional experimental techniques. The problem becomes further complicated with consideration of the cartilage surface roughness. Here a validated numerical study was developed to quantify the gap permeability to lateral synovial fluid flow. Both macro and micro scale gap flow models were created based on Darcy's law at the macroscale and the Navier-stokes equation at the microscale. To generate model inputs, the cartilage topography was numerically synthesised based on the experimental measurements of bovine media tibia cartilage using Dektak Stylus Profilers. The experimental results show that the average surface roughness R<sub>a</sub> is 1.97 μm and root-mean-square roughness R<sub>q</sub> is 2.44 μm, while the correlation lengths of the secondary and tertiary undulations are round 100 μm and 20 μm, respectively. The numerical results indicate that the contact gap height and fluid pressure gradient are two critical parameters which significantly affect the gap permeability. As the contact gap closes, there is a decrease in gap permeability, and most importantly, the gap permeability is also very sensitive to the fluid pressure gradient. Furthermore, with gap closure, the permeability of the contact gap gradually approaches that of the cartilage tissue, at which point the contact gap is functional closed. This occurs at a contact gap around 1 μm and for a fluid pressure gradient is below 5 × 10<sup>5</sup> Pa/m.</p>

engineering, biomedical,materials science, biomaterials
An experimental performance comparison of Newtonian and non-Newtonian fluids on a centrifugal blood pump

Ahmet Onder,Rafet Yapici,Omer Incebay

DOI: https://doi.org/10.1177/09544119211057626

2022-01-11

Abstract:The use of substitute fluid with similar rheological properties instead of blood is important due to ethical concerns and high blood volume consumption in pump performance test before clinical applications. The performance of a centrifugal blood pump with hydrodynamic journal bearing is experimentally tested using Newtonian 40% aqueous glycerin solution (GS) and non-Newtonian aqueous xanthan gum solution of 600 ppm (XGS) as working fluids. Experiments are performed at four different rotational speeds which are 2700, 3000, 3300, and 3600 rpm; experiments using GS reach between 8.5% and 37.2% higher head curve than experiments using the XGS for every rotational speed. It was observed that as the rotational speed and flow rate increase, the head curve difference between GS and XGS decreases. This result can be attributed to the friction reduction effect when using XGS in experiments at high rotation speed and high flow rate. Moreover, due to different fluid viscosities, differences in hydraulic efficiency were observed for both fluids. This study reveals that the use of Newtonian fluids as working fluids is not sufficient to determine the actual performance of a blood pump, and the performance effects of non-Newtonian fluids are remarkably important in pump performance optimizations.
Seasonal variation in methane flux from rice paddies associated with methane concentration in soil water, rice biomass and temperature, and its modelling

I. Nouchi,T. Hosono,K. Aoki,K. Minami

DOI: https://doi.org/10.1007/BF00046390

IF: 4.993

1994-04-01

Plant and Soil

Abstract:
Comparison Of Two Positions Of Knee Arthrocentesis How To Obtain Complete Drainage

Qiankun Zhang,Ting Zhang,Honghua Lv,Lidan Xie,Weidong Wu,Jianping Wu,Xuelian Wu

DOI: https://doi.org/10.1097/PHM.0b013e31825a13f0

IF: 3.4123

2012-01-01

American Journal of Physical Medicine & Rehabilitation

Abstract:Objective: Many studies have focused on the accuracy rate of intraarticular injection. However, sometimes, even when the needle enters the joint cavity accurately, it can be difficult to obtain a sufficient amount of joint fluid. This problem may be attributable to the position of the knee during arthrocentesis. The purpose of this prospective study was to determine which position, supine or sitting, would yield more joint fluid during knee arthrocentesis.Design: In this study, 40 knees belonging to 30 patients with osteoarthritis were examined. The patients were randomized between the supine position group (20 knees) and the sitting position group (20 knees). A "blind" aspiration was performed on each group. The volume of aspirated joint fluid (in milliliters) (V-1) was recorded for each knee. Each knee was then checked by ultrasound immediately after aspiration. If there was more than a depth of 2 mm of knee effusion, then a second knee arthrocentesis was performed using ultrasound guidance. The aspirated joint fluid volume (in milliliters) (V-2) was recorded for each knee. The value V-1/V-1 + V-2 was calculated for each knee. The data were analyzed using the SPSS 16.0 statistical package program.Results: In the supine position group, the "dry tap" rate was 10% in the first arthrocentesis, and 30% of the knees needed a second arthrocentesis. In the sitting position group, the dry tap rate was 25% in the first arthrocentesis, and 75% of the knees needed a second arthrocentesis. There was a significant difference in the V-1/V-1 + V-2 values between the two groups (P = 0.02).Conclusions: In our study, more joint fluid was aspirated from patients in the supine position than from patients in the sitting position.
An Experimental Model for Fluid Dynamics and Pressures During Endoscopic Lumbar Discectomy

Mazda Farshad,Alexandra Stauffer,Carl Moritz Zipser,Najmeh Kheram,José Miguel Spirig,Jonas Widmer,Vincent Hagel,Jana Felicitas Schader

DOI: https://doi.org/10.14245/ns.2448350.175

Neurospine

Abstract:Objective: Endoscopic spine surgery is an emerging technique of minimally invasive spine surgery. However, headache, seizure, and autonomic dysreflexia are possible irrigation-related complications following full-endoscopic lumbar discectomy (FELD). Pressure elevation through fluid irrigation may contribute to these adverse events. A validated experimental model to investigate parameters for guideline definition is lacking. This study aimed to create an experimental setting for FELD with pressure assessments to prove the concept of repeatable and sensitive measurement of intracranial, intra- and epidural pressures during spine endoscopy. Methods: To measure intradural pressure, catheters were introduced through a sacral approach and advanced to lumbar, thoracic, and cervical levels in human cadavers. Similarly, lumbar epidural and intracranial probes were placed. The dural sac was filled with Ringer solution to a physiologic pressure of 15 cmH2O. Lumbar endoscopy was performed on 3 human cadavers at the L3-4 level. Pressure changes were measured continuously at all sites and the effects of backflow-occlusion were monitored. Results: Reproducibility of the experimental model was validated with catheters at the correct locations and stable compartmental pressure baselines at all levels for 3 specimens (mean±standard deviation: 1.3±2.9 mmHg, 9.0±2.0 mmHg, 6.0±1.2 mmHg, respectively). Pressure increase could be detected sensitively by closing the system with backflow-occlusion. Conclusion: An experimental setup for feasible, repeatable, and precise pressure measurement during FELD in a human cadaveric setup has been developed. This allows investigation of the effects of endoscopic techniques and pump pressures on intra-, epidural and intracranial pressure and enables ranges of safe pump pressures per clinical situations.
Pharmaceutical analysis in solids using front face fluorescence spectroscopy and multivariate calibration with matrix correction by piecewise direct standardization.

J. C. L. Alves,R. Poppi

DOI: https://doi.org/10.1016/j.saa.2012.10.074

2013-02-15

Abstract:
Prediction of very late arrhythmia recurrence after radiofrequency catheter ablation of atrial fibrillation: The MB-LATER clinical score

Nebojša M. Mujović,M. Marinković,N. Marković,A. Shantsila,G. Lip,T. Potpara

DOI: https://doi.org/10.1038/srep40828

IF: 4.6

2017-01-20

Scientific Reports

Abstract:
Shoulder joint kinetics and dynamics during underwater forward arm elevation

Jessy Lauer,João Paulo Vilas-Boas,Annie Hélène Rouard

DOI: https://doi.org/10.1016/j.jbiomech.2018.01.043

2018-04-11

Abstract:Aquatic exercises are widely implemented into rehabilitation programs. However, both evaluating their mechanical demands on the musculoskeletal system and designing protocols to provide progressive loading are difficult tasks. This study reports for the first time shoulder joint kinetics and dynamics during underwater forward arm elevation performed at speeds ranging from 22.5 to 90°/s. Net joint moments projected onto anatomical axes of rotation, joint power, and joint work were calculated in 18 participants through a novel approach coupling numerical fluid flow simulations and inverse dynamics. Joint dynamics was revealed from the 3D angle between the joint moment and angular velocity vectors, identifying three main functions-propulsion, stabilization, and resistance. Speeds <30°/s necessitated little to no power at all, whereas peaks about 0.20 W⋅kg-1 were seen at 90°/s. As speed increased, peak moments were up to 61 × higher at 90 than at 22.5°/s, (1.82 ± 0.12%BW⋅AL vs 0.03 ± 0.01%BW⋅AL, P < 0.038). This was done at the expense of a substantial decrease in the joint moment contribution to joint stability though, which goes against the intuition that greater stabilization is required to protect the shoulder from increasing loads. Slow arm elevations (<30°/s) are advantageous for joint mobility gain at low mechanical solicitation, whereas the intensity at 90°/s is high enough to stimulate muscular endurance improvements. Simple predictive equations of shoulder mechanical loading are provided. They allow for easy design of progressive protocols, either for the postoperative shoulder or the conditioning of athlete targeting very specific intensity regions.
Comparing Central Aortic Pressures Obtained Using a SphygmoCor Device to Pressures Obtained Using a Pressure Catheter

Cara Esposito,Priscilla Machado,Ira S Cohen,Praveen Mehrotra,Michael Savage,David Fischman,Marguerite Davis,Nicholas Ruggiero,Paul Walinsky,Maureen E McDonald,Kristopher Dickie,Flemming Forsberg,Jaydev K Dave

DOI: https://doi.org/10.1093/ajh/hpac010

2022-01-25

American Journal of Hypertension

Abstract:Abstract BACKGROUND This study compared aortic pressures estimated using a SphygmoCor XCEL PWA device (ATCOR, Naperville, IL) noninvasively with aortic pressures obtained using pressure catheters during catheterization procedures and analyzed the impact of a linear-fit function on the estimated pressure values. METHODS One hundred and thirty-six patients scheduled for cardiac catheterization procedure were enrolled in IRB approved studies. Catheterization procedures were performed according to standard-of-care to acquire aortic pressure measurements. Immediately after the catheterization procedure with the pressure catheters removed, while the patients were still in the catheterization laboratory, central aortic pressures were estimated with the SphygmoCor device (using its inbuilt transfer function). The error between measured and estimated aortic pressures was evaluated using Bland–Altman analysis (n = 93). A linear-fit was performed between the measured and estimated pressures, and using the linear equation the error measurements were repeated. A bootstrap analysis was performed to test the generalizability of the linear-fit function. In a subset of cases (n = 13), central aortic pressure values were also obtained using solid-state high-fidelity catheters (Millar, Houston, TX), and the error measurements were repeated. RESULTS The magnitude of errors between the measured and estimated aortic pressures (mean errors >6.4 mm Hg; mean errors >8.0 mm Hg in the subset) were reduced to less than 1 mm Hg after using the linear-fit function derived in this study. CONCLUSIONS For the population examined in this study, the SphygmoCor data must be used with the linear-fit function to obtain aortic pressures that are comparable to the measurements obtained using pressure catheters. CLINICAL TRIALS REGISTRATION Trial Numbers NCT03243942 and NCT03245255.

peripheral vascular disease
Impact of extracorporeal blood pump gap sizes on the performance and hemocompatibility under off‐design operation

Lars Fischer,Sebastian V. Jansen,Ulrich Steinseifer,Ifan Yen,Po‐Lin Hsu,Michael Neidlin

DOI: https://doi.org/10.1111/aor.14875

2024-09-28

Artificial Organs

Abstract:Our studies' results showed a modest sensitivity of gap size variations on key metrics and revealed a significant contribution of the gap regions to the device's total hemolytic footprint, with an increasing contribution for reduced flow rates. Furthermore, a trend toward larger uniformly sized gaps being beneficial regarding hemocompatibility was identified. Background Hemocompatibility remains the dominant challenge in rotary blood pumps, and more information on the relationship between individual pump design features, hemodynamics, and blood trauma in various operation conditions is necessary. The study evaluated the variation of gap sizes in extracorporeal blood pumps concerning their influence on blood compatibility, particularly during off‐design conditions. Methods We developed a parametric generic blood pump framework for in‐silico and in‐vitro design feature analysis. Thirty‐six designs with varying axial and radial gap sizes between 0.5 mm and 3 mm were generated. CFD was applied to calculate and compare device hemodynamics and evaluate the performance and hemocompatibility during off‐design and target operation conditions. The following quantities were analyzed: pressure difference, hemolysis potential, residence times, hydraulic efficiency, and recirculation ratio. Results The in‐vitro prototype showed excellent agreement with in‐silico predictions regarding hydraulic performance (R2 = 0.996 with a RMSE = 2.07). Our results show a modest impact of gap size variations ±10% on key metrics. Domain‐resolved analyses revealed a significant contribution of the gap regions to the device's overall hemolytic performance, with an increasing contribution for off‐design flow rates. Overall elevated hemolysis levels were identified if at least one gap size was held minimal. Conclusions We introduced and showed the feasibility of a parametric rotary blood pump framework to systematically investigate design feature impact. Results suggest, larger and uniformly sized gaps being overall beneficial regarding hemocompatibility.

engineering, biomedical,transplantation
Fluid Dynamic Characterization of Transcatheter Aortic Valves Using Particle Image Velocimetry

Mohammed Barakat,Danny Dvir,Ali N Azadani

DOI: https://doi.org/10.1111/aor.13290

Abstract:Transcatheter aortic valves provide superior systolic hemodynamic performance in terms of valvular pressure gradient and effective orifice area compared with equivalent size surgical bioprostheses. However, in depth investigation of the flow field structures is of interest to examine the flow field characteristics and provide experimental evidence necessary for validation of computational models. The goal of this study was to compare flow field characteristics of the three most commonly used transcatheter and surgical valves using phase-locked particle image velocimetry (PIV). 26-mm Edwards SAPIEN 3, 26-mm Medtronic CoreValve, and 25-mm Carpentier-Edwards PERIMOUNT Magna were examined in a pulse duplicator with input parameters matching ISO-5840, that is, heart rate of 70 beats/min, cardiac output of 5 L/min, and mean aortic pressure of 100 mm Hg. A 2D PIV system was used to obtain flow velocity and viscous shear stress fields during the entire cardiac cycle. In vitro testing showed that the mean transvalvular pressure gradient was lowest for SAPIEN 3, followed by CoreValve, and PERIMOUNT Magna surgical bioprosthesis. In addition, the viscous shear stress magnitude within the jet boundary layer was higher in PERIMOUNT Magna than CoreValve and SAPIEN 3 at the peak of the flow. However, the measured shear stress values were below the known threshold for platelet activation and red blood damage. Therefore, shear-induced platelet activation is unlikely to take place during systole in the three bioprosthetic heart valves. The PIV measurements can be used for verification and validation of computational simulations.
[How to declare an occupational cancer and why?].

C. Peyrethon,L. Bensefa,D. Choudat

2004-10-15

Abstract:Many occupational cancers in France are not notified to social insurance. However, they must be searched for, because identification of an occupational exposure to carcinogenic chemical or process allows compensation for impairment and handicap. Due to the latency of the disease, screening and diagnosis of occupational cancers relies upon general practitioners. The patient notifies by himself his occupational disease to the social insurance. He joins a medical certificate that any physician can deliver. Recognition of the occupational origin of the disease depends on social status of the victim. The notification of the occupational disease has also consequences for prevention: identification of new carcinogenic substances or processes, adjustment of the legislation.
Correlation Between Femorotibial Pressure and Joint Gap in Osteoarthritis Patients with Varus Deformity: an Intraoperative Measurement Using Sensor Device in Primary Posterior-Stabilized Total Knee Arthroplasty

Xing Li,Hong Cai,Zhenguo Yu,Zijian Li,Ke Zhang,Hua Tian,Zhongjun Liu

DOI: https://doi.org/10.21037/atm-20-2044

IF: 3.616

2020-01-01

Annals of Translational Medicine

Abstract:Background The normal femorotibial pressure and its variation under different gap values remain unknown. Thus, for the purpose of improving soft-tissue balancing in total knee arthroplasty (TKA), a load-sensor device was used to measure femorotibial pressures. More specifically, the aim of this study was to analyze the trend in pressure changes. Methods Twenty TKAs were first balanced by conventional techniques, and then femorotibial pressure was measured using the sensor. After this, the difference in pressure among different joint gaps was calculated to analyze the trend. A repeated measure of analysis of variance and a Tukey’s honestly significant difference (HSD) test were used to analyze the data. Results The medial gap pressure was significantly increased at extension and flexion as the thickness of the sensor increased in most patients, while the lateral gap pressure changed without a specific trend. The average medial gap pressure was significantly larger than the average lateral gap pressure at both the full extension and 90° flexion positions. The average extension gap pressure was larger than the average flexion gap pressure at both the medial and lateral gaps. Conclusions The tension of the soft tissue around the knee joint changes with the joint gap. The tension at the medial side is higher than that on the lateral side, and that of the extension position is higher than that of the flexion position. The use of the pressure sensor insert has a better auxiliary effect on the operation using the gap-balancing technique.
Blood Pump Design Variations and Their Influence on Hydraulic Performance and Indicators of Hemocompatibility

L Wiegmann,S Boës,D de Zélicourt,B Thamsen,M Schmid Daners,M Meboldt,V Kurtcuoglu

DOI: https://doi.org/10.1007/s10439-017-1951-0

Abstract:Patients with ventricular assist devices still suffer from high rates of adverse events. Since many of these complications are linked to the flow field within the pump, optimization of the device geometry is essential. To investigate design aspects that influence the flow field, we developed a centrifugal blood pump using industrial guidelines. We then systematically varied selected design parameters and investigated their effects on hemodynamics and hydraulic performance using computational fluid dynamics. We analysed the flow fields based on Eulerian and Lagrangian features, shear stress histograms and six indicators of hemocompatibility. Within the investigated range of clearance gaps (50-500 µm), number of impeller blades (4-7), and semi-open versus closed shroud design, we found association of potentially damaging shear stress conditions with larger gap size and more blades. The extent of stagnation and recirculation zones was reduced with lower numbers of blades and a semi-open impeller, but it was increased with smaller clearance. The Lagrangian hemolysis index, a metric commonly applied to estimate blood damage, showed a negative correlation with hydraulic efficiency and no correlation with the Eulerian threshold-based metric.
A pulsatile blood vessel system for a femoral arterial access clinical simulation model

Scott F Miller,Jorge Sanz-Guerrero,Robert E Dodde,Daniel D Johnson,Atma Bhawuk,Hitinder S Gurm,Albert J Shih

DOI: https://doi.org/10.1016/j.medengphy.2013.04.010

Abstract:The model-based, rapid-prototyping-enabled design and manufacture of a pulsatile blood vessel (PBV) for high-fidelity mannequin-based clinical simulations is presented. The PBV presented here is a pressurized, flexible tube with alternating fluid pressure created by a pump to mimic the behavior of a human vessel in response to pulsatile pressure. The use of PBVs is important for the fidelity of a clinical simulator that requires residents to palpate and/or access the vessel. In this study, a PBV is presented which features the integration of 3D modeling using patient-specific computed tomography (CT) data, mold fabrication using rapid-prototyping, and finite element method for estimating the required pumping pressure to generate the same level of force (about 1.5 N) experienced by the user through palpation. The relationship between this palpation force and the vessel pressure is studied using two strategies: finite element analysis (FEA) and experiments in a femoral arterial access simulator with a pump, artificial vessel, and surrounding phantom tissue. The experimental results show a discrepancy of 8.7% from the FEA-predicted value. Qualitative validation is done by exposing and surveying 19 interventional cardiology residents at four major educational institutions to the simulator for accuracy of its feel. The overall survey results are positive.
Arthroscopic Bankart repair with an individualized capsular shift restores physiological capsular volume in patients with anterior shoulder instability

Helge Eberbach,Martin Jaeger,Lisa Bode,Kaywan Izadpanah,Andreas Hupperich,Peter Ogon,Norbert P Südkamp,Dirk Maier

DOI: https://doi.org/10.1007/s00167-020-05952-3

Abstract:Purpose: Capsular volume reduction in the context of anterior arthroscopic shoulder stabilization represents an important but uncontrolled parameter. The aim of this study was to analyse capsular volume reduction by arthroscopic Bankart repair with an individualized capsular shift in patients with and without ligamentous hyperlaxity compared to a control group. Methods: In the context of a prospective controlled study, intraoperative capsular volume measurements were performed in 32 patients with anterior shoulder instability before and after arthroscopic Bankart repair with an individualized capsular shift. The results were compared to those of a control group of 50 patients without instability. Physiological shoulder joint volumes were calculated and correlated with biometric parameters (sex, age, height, weight and BMI). Results: Patients with anterior shoulder instability showed a mean preinterventional capsular volume of 35.6 ± 10.6 mL, which was found to be significantly reduced to 19.3 ± 5.4 mL following arthroscopic Bankart repair with an individualized capsular shift (relative capsular volume reduction: 45.9 ± 21.9%; P < 0.01). Pre-interventional volumes were significantly greater in hyperlax than in non-hyperlax patients, while post-interventional volumes did not differ significantly. The average shoulder joint volume of the control group was 21.1 ± 7.0 mL, which was significantly correlated with sex, height and weight (P < 0.01). Postinterventional capsular volumes did not significantly differ from those of the controls (n.s.). Conclusion: Arthroscopic Bankart repair with an individualized capsular shift enabled the restoration of physiological capsular volume conditions in hyperlax and non-hyperlax patients with anterior shoulder instability. Current findings allow for individual adjustment and intraoperative control of capsular volume reduction to avoid over- or under correction of the shoulder joint volume. Future clinical studies should evaluate, whether individualized approaches to arthroscopic shoulder stabilization are associated with superior clinical outcome.
A High Performance Pulsatile Pump for Aortic Flow Experiments in 3-Dimensional Models

Rafeed A. Chaudhury,Victor Atlasman,Girish Pathangey,Nicholas Pracht,Ronald J. Adrian,David H. Frakes

DOI: https://doi.org/10.1007/s13239-016-0260-3

2016-03-16

Cardiovascular Engineering and Technology

Abstract:Aortic pathologies such as coarctation, dissection, and aneurysm represent a particularly emergent class of cardiovascular diseases. Computational simulations of aortic flows are growing increasingly important as tools for gaining understanding of these pathologies, as well as for planning their surgical repair. In vitro experiments are required to validate the simulations against real world data, and the experiments require a pulsatile flow pump system that can provide physiologic flow conditions characteristic of the aorta. We designed a newly capable piston-based pulsatile flow pump system that can generate high volume flow rates (850 mL/s), replicate physiologic waveforms, and pump high viscosity fluids against large impedances. The system is also compatible with a broad range of fluid types, and is operable in magnetic resonance imaging environments. Performance of the system was validated using image processing-based analysis of piston motion as well as particle image velocimetry. The new system represents a more capable pumping solution for aortic flow experiments than other available designs, and can be manufactured at a relatively low cost.

engineering, biomedical,cardiac & cardiovascular systems
Results of the Interlaboratory Computational Fluid Dynamics Study of the FDA Benchmark Blood Pump

Sailahari V. Ponnaluri,Prasanna Hariharan,Luke H. Herbertson,Keefe B. Manning,Richard A. Malinauskas,Brent A. Craven

DOI: https://doi.org/10.1007/s10439-022-03105-w

IF: 3.8

2022-11-19

Annals of Biomedical Engineering

Abstract:Computational fluid dynamics (CFD) is widely used to simulate blood-contacting medical devices. To be relied upon to inform high-risk decision making, however, model credibility should be demonstrated through validation. To provide robust data sets for validation, researchers at the FDA and collaborators developed two benchmark medical device flow models: a nozzle and a centrifugal blood pump. Experimental measurements of the flow fields and hemolysis were acquired using each model. Concurrently, separate open interlaboratory CFD studies were performed in which participants from around the world, who were blinded to the measurements, submitted CFD predictions of each benchmark model. In this study, we report the results of the interlaboratory CFD study of the FDA benchmark blood pump. We analyze the results of 24 CFD submissions using a wide range of different flow solvers, methods, and modeling parameters. To assess the accuracy of the CFD predictions, we compare the results with experimental measurements of three quantities of interest (pressure head, velocity field, and hemolysis) at different pump operating conditions. We also investigate the influence of different CFD methods and modeling choices used by the participants. Our analyses reveal that, while a number of CFD submissions accurately predicted the pump performance for individual cases, no single participant was able to accurately predict all quantities of interest across all conditions. Several participants accurately predicted the pressure head at all conditions and the velocity field in all but one or two cases. Only one of the eight participants who submitted hemolysis results accurately predicted absolute plasma free hemoglobin levels at a majority of the conditions, though most participants were successful at predicting relative hemolysis levels between conditions. Overall, this study highlights the need to validate CFD modeling of rotary blood pumps across the entire range of operating conditions and for all quantities of interest, as some operating conditions and regions (e.g., the pump diffuser) are more challenging to accurately predict than others. All quantities of interest should be validated because, as shown here, it is possible to accurately predict hemolysis despite having relatively inaccurate predictions of the flow field.

engineering, biomedical

The toxic factors in experimental traumatic shock; shock accompanying muscle ischemia and loss of vascular fluid.

The Safety Assessment of Irrigation Fluid Management for Shoulder Arthroscopy and Its Effect on Postoperative Efficacy

Diagnosis of traumatic shoulder arthrotomies using saline load test with intra-articular pressure monitoring

The investigation of fluid flow in cartilage contact gap

An experimental performance comparison of Newtonian and non-Newtonian fluids on a centrifugal blood pump

Seasonal variation in methane flux from rice paddies associated with methane concentration in soil water, rice biomass and temperature, and its modelling

Comparison Of Two Positions Of Knee Arthrocentesis How To Obtain Complete Drainage

An Experimental Model for Fluid Dynamics and Pressures During Endoscopic Lumbar Discectomy

Pharmaceutical analysis in solids using front face fluorescence spectroscopy and multivariate calibration with matrix correction by piecewise direct standardization.

Prediction of very late arrhythmia recurrence after radiofrequency catheter ablation of atrial fibrillation: The MB-LATER clinical score

Shoulder joint kinetics and dynamics during underwater forward arm elevation

Comparing Central Aortic Pressures Obtained Using a SphygmoCor Device to Pressures Obtained Using a Pressure Catheter

Impact of extracorporeal blood pump gap sizes on the performance and hemocompatibility under off‐design operation

Fluid Dynamic Characterization of Transcatheter Aortic Valves Using Particle Image Velocimetry

[How to declare an occupational cancer and why?].

Correlation Between Femorotibial Pressure and Joint Gap in Osteoarthritis Patients with Varus Deformity: an Intraoperative Measurement Using Sensor Device in Primary Posterior-Stabilized Total Knee Arthroplasty

Blood Pump Design Variations and Their Influence on Hydraulic Performance and Indicators of Hemocompatibility

A pulsatile blood vessel system for a femoral arterial access clinical simulation model

Arthroscopic Bankart repair with an individualized capsular shift restores physiological capsular volume in patients with anterior shoulder instability

A High Performance Pulsatile Pump for Aortic Flow Experiments in 3-Dimensional Models

Results of the Interlaboratory Computational Fluid Dynamics Study of the FDA Benchmark Blood Pump