Abstract:A mild in situ etching strategy using hexafluoro complex anion hydrolysis is innovatively proposed to prepare high‐quality MXene. A high yield of 28% single‐layer MXene is achieved through shaking the prepared Mxene. The versatility of the etching method is demonstrated by using varying hexafluoro complex salts. This work provides a promising pathway for the safe, straightforward, and sustainable production of MXene. MXene is a promising two‐dimensional (2D) material for energy storage applications owing to its exceptional conductivity and controllable surface chemistry. Currently, aqueous etching methods for the preparation of MXene sheets require a substantial quantity of HF or HCl, leading to issues such as structural defects in the MXene sheets and severe corrosiveness due to the acidic nature of these etchants. This study proposes a mild in situ etching strategy for the preparation of MXene materials through hexafluoro complex anion hydrolysis etching. Etching is accomplished by gradually introducing water into a suspension composed of hexafluoro complex, ethanol, and Ti3AlC2. This process results in the production of high‐quality MXene in a mild reaction environment with the weak acidity of the solution, making it suitable for scalable synthesis and process applications. Moreover, the inclusion of ethanol in the etching process increases the interlamellar spacing of MXene, thereby facilitating the stripping process and ultimately yielding of 28% in the production of single‐layer MXene through shaking. The MXene incorporated into the Si/C anode demonstrates a notable reversible cycling capacity of 563 mAh g−1 after 120 cycles, accompanied by an initial coulombic efficiency (CE) of 83%, surpassing the performance of Si/C anodes modified with carbon nanotubes (CNTs) and Super P. The approach presented in this study offers a promising pathway for the safe, straightforward, and sustainable production of high‐quality MXene materials.

Molten-salt etching synthesis of delaminatable MXenes

A general Lewis acidic etching route for preparing MXenes with enhanced electrochemical performance in non-aqueous electrolyte

A simple, efficient, fluorine‐free synthesis method of MXene/Ti3C2Tx anode through molten salt etching for sodium‐ion batteries

Advances in molten-salt-assisted synthesis of 2D MXenes and their applications in electrochemical energy storage and conversion

Molten Salt Derived MXenes: Synthesis and Applications

Mild and Efficient Method for the In Situ Preparation of High‐Quality MXene Materials Enabled by Hexafluoro Complex Anion Contained Salts Etching

Operando Exploring and Modulating Phase Evolution Chemistry from MAX to MXenes in Molten Salt Synthesis

Enhancing the Lithium Storage Properties of Molten Salt-Etched Ti3C2Tx Through Sequential Intercalation of Alkali Ions

Molten-salt Synthesized MXene for Catalytic Applications: A Review

Synthesis of fluorine free MXene through lewis acidic etching for application as electrode of proton supercapacitors

Water-dispersible Ti3C2Tz MXene nanosheets by molten salt etching

One-Pot Green Process to Synthesize MXene with Controllable Surface Terminations using Molten Salts

MXene‐Copper/Cobalt Hybrids Via Lewis Acidic Molten Salts Etching for High Performance Symmetric Supercapacitors

HCl-Based Hydrothermal Etching Strategy Toward Fluoride-Free MXenes

A Sweet Synthesis of MXenes

Gaseous Scissor-mediated Electrochemical Exfoliation of Halogenated MXenes and its Boosting in Wear-Resisting Tribovoltaic Devices

In Situ Synthesis of MXene with Tunable Morphology by Electrochemical Etching of MAX Phase Prepared in Molten Salt

Fluorine-free MXenes via Molten Salt Lewis Acidic Etching: Applications, Challenges, and Future Outlook

Solvent-Free One-Step Green Synthesis of Mxenes by “Gas-Phase Selective Etching”

Molten Salt Intercalated MXene Membrane for D-Spacing Stabilization under Electrochemical Assistance