Abstract:Recycle and reuse of waste asphalt materials is a key strategy for pavement sustainability and carbon reduction. Studies on the recycling agents or rejuvenators have produced fruitful findings but there is still an imperative need for a general principle/guideline on the compositional design of competent rejuvenators. Given the fact that the percentage and aggregation degree of asphaltenes are both increased upon aging, and considering that in theory rejuvenation should reverse such impacts, it is advocated in this study that rejuvenators ought to fulfill the dual functionality of diluting and dispersing asphaltenes. It is then proposed that rejuvenators should be formulated as a small proportion of asphaltene dispersants carried and distributed by a matrix of asphaltene diluents (or the so-called softeners), so as to diffuse into and soften the aged asphalt while in the meantime restoring the microstructural homogeneity by improving the colloidal dispersion. Preliminary verification of this concept was based on three rejuvenation schemes involving three selected additives representative of aromatic softeners as well as phenolic and ionic dispersants. Experimental investigations included rheological evaluations, and analytical characterizations consisting of infrared spectrum and gel permeation chromatography (GPC) analyses. Quantum chemical computations were conducted to probe the mechanisms underlying the different rejuvenating/dispersing performances by means of molecular descriptors in the framework of conceptual density functional theory (CDFT) and by inspecting the molecular interactions. The results suggested that by optimizing the respective dosages, the three rejuvenation schemes would all effectively restore the rheological performance in the full temperature range of interest. All the chemicals considered were physically blending with the aged asphalt without discernible signs of chemical reactions. Incorporation of either dispersant was able to reduce a significant proportion of the softener required while providing similar rejuvenating effectiveness as compared to using the softener alone, which was attributed to the improved asphaltene dispersion. Ranking of the dispersing capability among the three additives was in consistency with the strength of their interactions with the asphaltene. The cation-π and CH-anion interactions were identified as major contributors in the case of the ionic dispersant, and hydrogen bonding and π-π interactions for the phenolic dispersant. The great prospect demonstrated by the ionic additive in terms of high rejuvenating efficiency and significant environmental benefits warrants further investigation into this type of dispersants. It is anticipated that the findings would contribute to the scientific formulation of rejuvenators for improved pavement sustainability.

Use of Hansen Solubility Parameters (HSP) in the selection of highly effective rejuvenators for aged bitumen

Characterizing Asphalt Aging Behaviors and Rheological Properties Based on Spectrophotometry

Characterisation of bitumen through multiple ageing-rejuvenation cycles

Laboratory Performance Evaluation on the Recovering of Aged Bitumen With Vegetable Oil Rejuvenator

Assessment of methods to select optimum doses of rejuvenators for asphalt mixtures with high RAP content

Characterisation of rejuvenation of various modified asphalt binders based on simplified chromatographic techniques

Development of a new rejuvenator for aged SBS modified asphalt binder

Determination of Rejuvenator Proportion within the Recycled Bitumen: Empirical Double-Logarithmic Formula and Calibration

Fulfilling the dual functionality for asphalt rejuvenator formulation: An experimental and computational exploration

Role of thermodynamic relaxation on effectiveness of recycling agents on properties of aged bitumen

A molecular dynamics simulation study on the recovery performance of aged asphalt binder by waste vegetable oil rejuvenators

Optimization and validation of waste bio-oil based high-performance rejuvenator for rejuvenating aged bitumen

Multiscale optimization on polymer-based rejuvenators for the efficient recycling of aged high-viscosity modified asphalt: Molecular dynamics simulation and experimental analysis

Do all rejuvenators improve asphalt performance?

Exploring the recovery capacity of recycling agents on atomic-scale energy properties of aged bitumen and their potential correlations with high-temperature rheological performance

Rheological Characterization of Reversibility Between Aging and Rejuvenation of Common Modified Asphalt Binders

Combined Use of Polyurethane Prepolymer and Aromatic Oil in Physicochemical Rejuvenation of Aged SBS Modified Bitumen for Performance Recovery

Enhancing Pavement Durability: Comparative Rheological Evaluation of Conventional and Rejuvenated Reclaimed Binders under Aging Conditions

Analysis of Rheological Properties and Regeneration Mechanism of Recycled Styrene–Butadiene–Styrene Block Copolymer (SBS) Modified Asphalt Binder Using Different Rejuvenators

Evaluating the Rheological, Chemical and Morphological Properties of SBS Modified Asphalt-Binder under Multiple Aging and Rejuvenation Cycles

Rejuvenating oxidized paving asphalts – When softeners meet asphaltene dispersants