Abstract:Recycle and reuse of waste asphalt materials is a key strategy for pavement sustainability and carbon reduction. Studies on the recycling agents or rejuvenators have produced fruitful findings but there is still an imperative need for a general principle/guideline on the compositional design of competent rejuvenators. Given the fact that the percentage and aggregation degree of asphaltenes are both increased upon aging, and considering that in theory rejuvenation should reverse such impacts, it is advocated in this study that rejuvenators ought to fulfill the dual functionality of diluting and dispersing asphaltenes. It is then proposed that rejuvenators should be formulated as a small proportion of asphaltene dispersants carried and distributed by a matrix of asphaltene diluents (or the so-called softeners), so as to diffuse into and soften the aged asphalt while in the meantime restoring the microstructural homogeneity by improving the colloidal dispersion. Preliminary verification of this concept was based on three rejuvenation schemes involving three selected additives representative of aromatic softeners as well as phenolic and ionic dispersants. Experimental investigations included rheological evaluations, and analytical characterizations consisting of infrared spectrum and gel permeation chromatography (GPC) analyses. Quantum chemical computations were conducted to probe the mechanisms underlying the different rejuvenating/dispersing performances by means of molecular descriptors in the framework of conceptual density functional theory (CDFT) and by inspecting the molecular interactions. The results suggested that by optimizing the respective dosages, the three rejuvenation schemes would all effectively restore the rheological performance in the full temperature range of interest. All the chemicals considered were physically blending with the aged asphalt without discernible signs of chemical reactions. Incorporation of either dispersant was able to reduce a significant proportion of the softener required while providing similar rejuvenating effectiveness as compared to using the softener alone, which was attributed to the improved asphaltene dispersion. Ranking of the dispersing capability among the three additives was in consistency with the strength of their interactions with the asphaltene. The cation-π and CH-anion interactions were identified as major contributors in the case of the ionic dispersant, and hydrogen bonding and π-π interactions for the phenolic dispersant. The great prospect demonstrated by the ionic additive in terms of high rejuvenating efficiency and significant environmental benefits warrants further investigation into this type of dispersants. It is anticipated that the findings would contribute to the scientific formulation of rejuvenators for improved pavement sustainability.

Fulfilling the dual functionality for asphalt rejuvenator formulation: An experimental and computational exploration

Rejuvenating oxidized paving asphalts – When softeners meet asphaltene dispersants

Multiscale optimization on polymer-based rejuvenators for the efficient recycling of aged high-viscosity modified asphalt: Molecular dynamics simulation and experimental analysis

Characterisation of rejuvenation of various modified asphalt binders based on simplified chromatographic techniques

Rejuvenation effect evaluation and mechanism analysis of rejuvenators on aged asphalt using molecular simulation

Behaviors of Asphalt under Certain Aging Levels and Effects of Rejuvenation

Do all rejuvenators improve asphalt performance?

Diffusion and interaction mechanism of rejuvenating agent with virgin and recycled asphalt binder: a molecular dynamics study

Exploration of the Design Theory of Crack-Resistant Rejuvenator for Warm-Mix Recycled Asphalt Mixtures with High RAP Contents

Comparison and Analysis of the Performances and Mechanisms of Recycled Asphalt Incorporating High-Permeability Rejuvenating Agent

A molecular dynamics simulation study on the recovery performance of aged asphalt binder by waste vegetable oil rejuvenators

Optimization Design of Asphalt Emulsion with Rejuvenator Towards a Uniform Distribution Inside the Damaged Porous Asphalt Mixture for a Better Ravelling Resistance

Evaluation on the diffusion-fusion properties and interfacial mechanical behavior of virgin and aged asphalt

Study on Effect of Various Rejuvenators on Virgin Asphalt Binders Suffering Various Aging Conditions and the Unified Evaluation Index

Rheological Characterization of Reversibility Between Aging and Rejuvenation of Common Modified Asphalt Binders

Preparation and Short-Term Aging Properties of Asphalt Modified by Novel Sustained-Release Microcapsules Containing Rejuvenator

Investigating Asphalt Rejuvenators from Biowastes Based on Their Wetting, Diffusion, and Compatibility

Enhancing Pavement Durability: Comparative Rheological Evaluation of Conventional and Rejuvenated Reclaimed Binders under Aging Conditions

Novel Composite Rejuvenators Development and Comparative Analyzes of Epoxy Versus Diisocyanate Rejuvenators in Rejuvenating Aged SBS-Modified Asphalt Binders

Diffusion Behavior of Rejuvenator and Its Influences on the Interfacial Properties of Recycled Asphalt Mixtures by Molecular Dynamics Simulations and Experiments

Investigation on the oxidation aging resistance of asphalt by rejuvenator-loaded porous CaCO3 microparticles