Abstract:Further property enhancement of alnico, an attractive near-term, non-rare-earth permanent magnet alloy system, primarily composed of Al, Ni, Co, and Fe, relies on improved morphology control and size refinement of its complex spinodally decomposed nanostructure that forms during heat-treatment. Using a combination of transmission electron microscopy and atom probe tomography techniques, this study evaluates the magnetic properties and microstructures of an isotropic 32.4Fe-38.1Co-12.9Ni-7.3Al-6.4Ti-3.0Cu (wt.$\%$) alloy in terms of processing parameters such as annealing temperature, annealing time, application of an external magnetic field, as well as low-temperature "draw" annealing. Optimal spinodal morphology and spacing is formed within a narrow temperature and time range ($\sim 840 \unicode{x2103}$ and 10 min during thermal-magnetic annealing (MA). The ideal morphology is a mosaic structure consisting of periodically arrayed $\sim 40$ nm diameter (Fe-Co)-rich rods ($\alpha_1$ phase) embedded in an (Al-Ni)-rich ($\alpha_2$ phase) matrix. A Cu-enriched phase with a size of $\sim$ 3-5 nm is located at the corners of two adjacent $\{110\}$ facets of the $\alpha_1$ phase. The MA process significantly increased remanence ($B_\text{r}$) ($\sim$ 40-70 $\%$) of the alloy due to biased elongation of the $\alpha_1$ phase along the $\langle100\rangle$ crystallographic direction, which is closest in orientation to the applied magnetic field. The optimum magnetic properties of the alloy with an intrinsic coercivity ($H_\text{cj}$) of 1845 Oe and a maximum energy product ($BH_\text{max}$) of 5.9 MGOe were attributed to the uniformity of the mosaic structure.

Evolution of Microstructure and Magnetic Properties of Isotropic Alnico 8 Ribbons with Various Ti Contents

Tailoring the magnetic properties and microstructure of Alnico 8 magnets by various Ti contents and processing conditions

Microstructural and magnetic property evolution with different heat-treatment conditions in an alnico alloy

Multiscale microstructural evolution of Fe–Ni–Al–Ti alloy with high magnetization

Effect of spinodal decomposition structure of alnico alloy on magnetic viscosity and magnetization reversal

Structure and Magnetic Behaviours of Melt-Spun Ti1.4v0.6ni Alloy Containing Icosahedral Quasicrystalline Phase

Magneto-structural transformations and magnetocaloric effect in the Heusler type Ni48Cu2Mn36Sn14-xTix melt-spun ribbons

Structure and magnetic properties of alnico alloy doped SmCo5–Cu ribbons

Microstructural evolution and magnetic properties of the Alnico8 alloy thermomagnetically treated at high temperature

Evolution of Fe–Co Rich Particles in Alnico 8 Alloy Thermomagnetically Treated at 800°C

Tunable magnetic properties and magnetic domain structure of nanocomposite permanent materials via Ti addition into Nd-Fe-Co-B alloys

Effect of melt-spinning speed on the microstructure and magnetic properties of Al–Cu–Fe alloy-doped SmCo5 ribbons

Tailoring the microstructure, magnetic properties and interaction mechanisms of Alnico-Ta alloys by magnetic field treatment

Synthesis, Magnetic and Microstructural Properties of Alnico Magnets with Additives

Microstructure And Magnetic Properties Of Ndxfe85-Xti4b10.5c0.5 (X=7.8, 8.2, 8.6, 9.0, And 9.4) Nanocomposite Alloys With Ti And C Additions

Effect of annealing on the structure and magnetic properties of SmCo5-based ribbons with Al-Cu-Fe addition

Microstructure, Magnetic and Magnetocaloric Properties in Ni42.9co6.9mn38.3sn11.9 Alloy Ribbons

The Magnetic and Microstructural Evolution of Ni45mn24ga23co4cu4 Heusler Alloy Ribbons

Magnetic and structural studies in Sm‐Fe‐Ti magnets

Stability bifurcation of the microstructure coarsening of Alnico8 alloy thermomagnetically treated at high temperature

Structure and magnetic properties of spinodal decomposed Cu60Ni20Fe10Co10 ribbons with hard magnetism