Abstract:This study investigates the preparation of ultrahigh-strength AZ80 magnesium alloy bulks using room temperature multidirectional forging (MDF) at different strain rates. The focus is on elucidating the effects of multidirectional loading and strain rates on grain refinement and the subsequent impact on the mechanical properties of the AZ80 alloy. Unlike hot deformation, the alloy subjected to room temperature MDF exhibits a lamellar twinned structure with multi-scale interactions. The key to achieving effective room temperature MDF of the alloy lies in combining multidirectional loading with small forging strains per pass (6%). This approach not only maximizes the activation of twinning to accommodate deformation but ensures sufficient grain refinement. Microstructural analysis reveals that the evolution of the grain structure in the alloy during deformation results from the competition between {101 ̄2} twinning or twinning variant interactions and detwinning. Increasing the forging rate effectively activates more twin variants, and additional deformation passes significantly enhance twin interaction levels and dislocation density. Furthermore, at a higher strain rate, more pronounced dislocation accumulation facilitates the transformation of twin structures into high-angle grain boundaries, promoting texture dispersion and suppressing detwinning. The primary strengthening mechanisms in room temperature MDF samples are grain refinement and dislocation strengthening. While increased dislocation density raises yield strength, it reduces post-yield work hardening capacity. After two passes of MDF at a higher strain rate, the alloy achieves an optimal balance of strength and ductility, with a tensile strength of 462 MPa and an elongation of 5.1%, significantly outperforming hot-deformed magnesium alloys.

Microstructure, Texture, Mechanical Properties, and Corrosion Behavior of Biodegradable Zn-0.2Mg Alloy Processed by Multi-Directional Forging

Microstructure and Mechanical Properties of Al-Cu-Mn Alloy Mechanically Alloyed with 5 wt% Zr After Multi-Directional Forging

Achieving a high corrosion resistant and high strength magnesium alloy using multi directional forging

Effect of extrusion process on microstructure and mechanical and corrosion properties of biodegradable Mg−5Zn−1.5Y magnesium alloy

Simultaneously Enhanced Mechanical Properties and Damping Capacities of ZK60 Mg Alloys Processed by Multi-Directional Forging

Microstructure, texture and mechanical properties of coarse-grained Mg–Gd–Y–Nd–Zr alloy processed by multidirectional forging

Microstructural Evolution and Mechanical Properties of Extruded AZ80 Magnesium Alloy during Room Temperature Multidirectional Forging Based on Twin Deformation Mode

Microstructure, mechanical properties and corrosion fatigue behaviour of biodegradable Mg–Zn–Y–Nd alloy prepared by double extrusion

Using Solution Heat Treatment and Multi Directional Forging to Improve the Mechanical and Corrosion Properties of an Mg–2Zn–0.2Ag Alloy

Microstructure, Mechanical Properties, and in Vitro Corrosion Behavior of Biodegradable Zn-1Fe-xMg Alloy

Combined effect of multidirectional forging and heat treatment on erosion and corrosion behaviour of the Mg-Zn-Mn alloys

Effect of Rotary Forging on Microstructure and Mechanical Properties of Mg–3Al–1Zn Magnesium Alloy

Microstructure, Hot Deformation Behavior, and Recrystallization Behavior of Zn-1Fe-1Mg Alloy under Isothermal Compression

Microstructure, Mechanical Properties, Corrosion Behavior and Biocompatibility of As-Extruded Biodegradable Mg–3Sn–1Zn–0.5Mn Alloy

Grain refinement and improved mechanical properties of Mg-4Zn-0.5Ca-0.5RE magnesium alloy by thermomechanical processing

Corrosion behavior and mechanical properties of extruded low-alloyed Mg−0.5Bi−0.5Y−0.2Zn alloy

Effect of Extrusion Process on Microstructure, Corrosion Properties, and Mechanical Properties of Micro-Alloyed Mg–Zn–Ca–Zr Alloy

Enhanced mechanical properties and microstructural stability of ultrafine-grained biodegradable Zn-Li-Mn-Mg-Cu alloys produced by rapid solidification and high-pressure torsion

Microstructural and mechanical behavior of Al-Mg-Mn-Sc-Zr alloy subjected to multi-axial forging at room temperature

High strength and ductility in a new Mg–Zn–Ga biocompatible alloy by drawing and rotary forging

Investigation on corrosion behavior and mechanical properties of an extruded Mg-Zn-Al-Sn-Mn alloy