Abstract:Dielectric elastomers are soft and perfect insulator polymers able to produce large strains with high energy density under the effect of applied high voltage. However, their use in practical applications is hindered by the need for high voltage to actuate. Also, they need prestretching between rigid frames to produce out-of-plane shape changes, which may reduce their lifetime. Here, we synthesized a set of elastomers with high permittivity (from 20 to reach 60 at 103 Hz), controllable thermal properties (Tg vary from −15 to −50 °C), and good mechanical properties (Young's modulus values between 0.48 and 0.2 MPa at 20% strain). Due to the high permittivity, an actuator made of the material was able to respond to a low voltage of 700 V and produce a 6.5% area strain for more than 10 000 cycles. Moreover, the elastomers were found to produce giant free-end bending displacements with prespecified bending direction (bend to the side of the positive electrode) under a low electric field, which we called programmable dielectric elastomers (PDE). Besides the aforementioned characteristics and performance, the formulated elastomers are suitable for UV-based three-dimensional (3D) printing. The printability of the elastomers allows fabricating programmable complex geometries to produce high deformations under relatively low electric fields.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaelm.0c00837?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaelm.0c00837</a>.Printing parameters for successfully printed parts from different elastomer formulations of 100 μm layer thickness using an Asiga printer (Table S1); chemical formulation and summary of mechanical properties (Table S2); FTIR results (Figure S1); Curing depth versus exposure time for different light stabilizers amounts and curing depth versus exposure time for different amounts of photoinitiator (Figure S2); FTIR results (Figure S3); TGA results, DSC results, and gel extraction efficiency results (Figure S4); electrochemical results (Figure S5); response of the investigated elastomers during and after charging cycle (Figure S6); Set of 30 samples printed one patch for testing the bending direction and simple test rig to randomly test the printed samples (Figure S7); Yeoh's model fitting of experimental data (Figure S8); model and assumptions proposed for modeling electromechanical behavior of the elastomers and distribution of Maxwell's stresses in the actuated area (Figure S9); and simulations results showing the dependence of Z bending displacement on applied voltage (Figure S10) (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00837/suppl_file/el0c00837_si_001.pdf">PDF</a>)Elastic stretchability of printed piece of elastomer and elastic cyclic compression of a complex lattice (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00837/suppl_file/el0c00837_si_002.mp4">MP4</a>)Breakdown strength phenomenon of elastomer (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00837/suppl_file/el0c00837_si_003.mp4">MP4</a>)Demonstration of the actuation performance of elastomer (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00837/suppl_file/el0c00837_si_004.mp4">MP4</a>)Proof-of-concept applications for soft gripper application (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00837/suppl_file/el0c00837_si_005.mp4">MP4</a>)Stability of membrane for 10 000 s under 700 V at 0.5 Hz (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00837/suppl_file/el0c00837_si_006.mp4">MP4</a>)This article has not yet been cited by other publications.

Ultrasoft-yet-strong pentablock copolymer as dielectric elastomer highly responsive to low voltages

Self‐Strengthening Dielectric Elastomer of Triblock Copolymer with Significantly Improved Electromechanical Performance under Low Voltage

Thermoplastic Dielectric Elastomer of Triblock Copolymer with High Electromechanical Performance.

Significantly improved electromechanical performance of dielectric elastomers via alkyl side-chain engineering

A New Low Moduli Dielectric Elastomer Nano-Structured Composite with High Permittivity Exhibiting Large Actuation Strain Induced by Low Electric Field

Electromechanical Stability Of Dielectric Elastomer Using Electric Energy Density Function With Variable Dielectric Constant

End-block-curing ABA triblock copolymer towards dielectric elastomers with both high electro-mechanical performance and excellent mechanical properties

Dielectric Elastomer with Excellent Electromechanical Performance by Dipole Manipulation of Poly(vinyl Chloride) for Artificial Muscles under Low Driving Voltage Application

Anisotropic Electroactive Elastomer for Highly Maneuverable Soft Robotics.

Programmable, UV-Printable Dielectric Elastomers Actuate at Low Voltage without Prestretch and Supporting Frames

A High-Response-frequency Bimodal Network Polyacrylate Elastomer with Ultrahigh Power Density under Low Electric Field

Low-loss polyacrylate dielectric elastomer with outstanding actuation performance by optimizing crosslinking network

Dielectric Polymer with Designable Large Motion under Low Electric Field

Mechanically Tough Micellar Cubic Liquid‐Crystalline Polymer Electrolytes for Electromechanical Actuators

Remarkable Electrically Actuation Performance in Advanced Acrylic-Based Dielectric Elastomers Without Pre-Strain at Very Low Driving Electric Field

Achieving High Performance Electric Field Induced Strain: A Rational Design of Hyperbranched Aromatic Polyamide Functionalized Graphene-Polyurethane Dielectric Elastomer Composites

Composite elastomers with on-demand convertible phase separations achieve large and healable electro-actuation

A novel dielectric elastomer actuator based on polyvinyl alcohol hydrogel electrodes

Constructing Advanced Dielectric Elastomer Based on Copolymer of Acrylate and Polyurethane with Large Actuation Strain at Low Electric Field

Enabling large actuated strain at low electric field by grafting cyanoester dipoles onto a poly(styrene-b-butadiene-b-styrene) elastomer using thiol-ene click chemistry

Preparation of PANI/CuPc/PDMS Composite Elastomer with High Dielectric Constant and Low Modulus Assisted by Electric Fields