Abstract:Dielectric elastomers (DEs) featured with fast reversible and large deformation excited by an external electric field show promising applications as leading artificial muscle materials in many emerging technologies. It remains a great challenge to synthesize a DE simultaneously with high electromechanical performance (large actuation strain, high energy density, free of pre-stretch and bracing) and excellent mechanical properties (low Tg, low viscous loss, low modulus, and high mechanical strength). Herein, we propose and demonstrate that end-block-curing ABA triblock copolymer elastomer with well-designed structures is a new strategy to address the challenge by taking advantage of the microphase separation nature of the block copolymer. Particularly, poly (styrene-b-butyl acrylate-b-styrene) (SBAS) with post-curable end blocks, i.e. polystyrene (PS) blocks, are designed and synthesized. Different levels of cyclohex-3-enylmethyl acrylate (CEA) that contains two asymmetric vinyl groups with very different reactivity are incorporated into the end blocks for end-block curing while the molecular weight for each block is fixed. It is found that curing the end blocks enhances the strain-hardening effect during stretch and thus significantly increases the electro-mechanical performance. Without pre-stretch, the DE actuator of the end block cured SBAS exhibits a maximum actuation strain up to 72%, dielectric breakdown strength up to 154 kV mm(-1), and energy density up to 270 kJ/m(3), which are three, four, and almost fourty times that of the SBAS free of CEA, respectively. The maximum energy density is over 30 times that of mammalina skeletal muscle while the maximum actuation strain is 3.4 times. Interestingly, the improvement in eletromechanical performance is fulfilled with little increase in glass transition temperature (Tg), mild increase in modulus, and excellent tensile strength due to the microphase structures. The end-block-cured SBAS retains a low Tg of the rubbery phase around -35 degrees C, relatively low viscous loss of 0.2 at room temperature, a modulus lower than 1 MPa, and tensile strength around 3 MPa, which are attractive in terms of DE device applications.

Anisotropic Electroactive Elastomer for Highly Maneuverable Soft Robotics.

Spatially Modulus-Patterned dielectric elastomer actuators with oriented electroactuation

Self‐Strengthening Dielectric Elastomer of Triblock Copolymer with Significantly Improved Electromechanical Performance under Low Voltage

Thermoplastic Dielectric Elastomer of Triblock Copolymer with High Electromechanical Performance.

A New Low Moduli Dielectric Elastomer Nano-Structured Composite with High Permittivity Exhibiting Large Actuation Strain Induced by Low Electric Field

Control of Dielectric Elastomer Soft Actuators Using Antagonistic Pairs

Significantly improved electromechanical performance of dielectric elastomers via alkyl side-chain engineering

Fabrication and Modeling of Dielectric Elastomer Soft Actuator with 3D Printed Thermoplastic Frame

Modelling and Control of a Dielectric Elastomer Actuator

The Soft Ray-Inspired Robots Actuated by Solid-Liquid Interpenetrating Silicone-Based Dielectric Elastomer Actuator.

Design of Facile Dielectric Elastomer-Based Bending Module for Soft Robotics Applications

An Integrated Design and Fabrication Strategy for Planar Soft Dielectric Elastomer Actuators

End-block-curing ABA triblock copolymer towards dielectric elastomers with both high electro-mechanical performance and excellent mechanical properties

An Anisotropic Dielectric Elastomer Actuator with an Oriented Electrospun Nanofiber Composite Film

Electro-pneumatic Dielectric Elastomer Actuator Incorporating Tunable Bending Stiffness

Dielectric elastomer film with anisotropic actuation deformation on film plane

Dielectric Elastomer Actuators for Artificial Muscles: A Comprehensive Review of Soft Robot Explorations

A Unidirectional Soft Dielectric Elastomer Actuator Enabled by Built-In Honeycomb Metastructures.

A Large-Strain and Ultrahigh Energy Density Dielectric Elastomer for Fast Moving Soft Robot

Electroactive Polymer-Based Soft Actuator with Integrated Functions of Multi-Degree-of-Freedom Motion and Perception

Multisegment annular dielectric elastomer actuators for soft robots