Abstract:Dielectric elastomer(DE) is a kind of promising material bearing excellent activate properties including large deformations (up to 380%), high energy densities (up to 3.4 J/g), high efficiency, high responsive speed, good reliability and durability. Thus the DE actuator, sensors and energy harvester is widely used in the field of aeronautics and smart bionics. When an electric field is applied on the compliant electrodes of the dielectric elastomers, the polymer shrinks along the electric field and expands in the transverse plane. In consequence, the electric field becomes higher. This kind of positive feedback may cause the elastomer to thin down, resulting in an electromechanical stability. An analysis on the electromechanical stability of dielectric elastomer using arbitrary free-energy function with constant dielectric constant has been presented in Suo’s papers. In many research on the electromechanical stability analysis of DE actuator, DE’s dielectric constant is assumed to be a constant. This is only the truth if the dielectric elastomer undergoing limited deformation. Actually, a typical dielectric elastomer is a kind of crosslinked polymer. The structural symmetry of the macromolecular, the crosslinking degree, along with the tensile deformation can affect the dielectric permittivity enormously. For dielectric elastomers with higher crosslinking degree, or higher degree of molecular structural symmetry, its permittivity is relatively low. In addition, stretching can guide the macromolecule to be arranged in order, this can increase the intermolecular forces and reduce the activities of polar group, as a results, the dielectric constant will decrease. However, if the crosslinking degree is low and the deformation is well below the extension limit, the molecular units in the polymers can be polarized as freely as in a polymeric liquid. In this case the corresponding permittivity is unaffected by the deformation. Recent experimental research results also proved that the dielectric permittivity of dielectric elastomer changed while undergoing large deformation. According to Pelrine, the dielectric constant of the DE film is variable and it is a function of the area increase ratio which depends on stretch ratio. In this paper, approach for the electromechanical stability of a dielectric elastomer having variable dielectric constant is developed. The critical breakdown electric field is obtained. Simulation results proved that the prestretching process can enhance remarkably the electromechanical stability of dielectric elastomer. These results agree well with the experimental data and can be used as guidances in the design and fabrication of dielectric elastomer actuators.

Low-loss polyacrylate dielectric elastomer with outstanding actuation performance by optimizing crosslinking network

Significantly improved electromechanical performance of dielectric elastomers via alkyl side-chain engineering

Self‐Strengthening Dielectric Elastomer of Triblock Copolymer with Significantly Improved Electromechanical Performance under Low Voltage

Tunable Actuation of Dielectric Elastomer by Electromechanical Loading Rates

Thermoplastic Dielectric Elastomer of Triblock Copolymer with High Electromechanical Performance.

Electromechanical Stability Of Dielectric Elastomer Using Electric Energy Density Function With Variable Dielectric Constant

Self-healing High-performance Dielectric Elastomer Actuator with Novel Liquid-solid Interpenetrating Structure

Soft, Tough, and Fast Polyacrylate Dielectric Elastomer for Non-Magnetic Motor.

A High-Response-frequency Bimodal Network Polyacrylate Elastomer with Ultrahigh Power Density under Low Electric Field

End-block-curing ABA triblock copolymer towards dielectric elastomers with both high electro-mechanical performance and excellent mechanical properties

Remarkable Electrically Actuation Performance in Advanced Acrylic-Based Dielectric Elastomers Without Pre-Strain at Very Low Driving Electric Field

Enabling large actuated strain at low electric field by grafting cyanoester dipoles onto a poly(styrene-b-butadiene-b-styrene) elastomer using thiol-ene click chemistry

Significant improvements in the electromechanical performance of dielectric elastomers by introducing ternary dipolar groups

Tailoring Chain Length And Cross-Link Density In Dielectric Elastomer Toward Enhanced Actuation Strain

Composite elastomers with on-demand convertible phase separations achieve large and healable electro-actuation

Dielectric Polymer with Designable Large Motion under Low Electric Field

Study on the improved electromechanical properties of composited dielectric elastomer by tailoring three-dimensional segregated multi-walled carbon nanotube (MWCNT) network

Constructing Advanced Dielectric Elastomer Based on Copolymer of Acrylate and Polyurethane with Large Actuation Strain at Low Electric Field

Highly Improved Electro-Actuation of Dielectric Elastomers by Molecular Grafting of Azobenzenes to Silicon Rubber

Advanced Acrylate Dielectric Elastomers with Large Actuation Strains at Very Low Electric Field

Reducing Dielectric Loss of High‐Dielectric‐Constant Elastomer via Rigid Short‐Chain Crosslinking