Abstract:An understanding of the support effect is fundamental for guiding the rational design of heterogeneous catalysts. Herein, the role of pore structure on metal dispersion and catalytic performance was comprehensively investigated using Ni/Al2O3 catalysts. Three different Al2O3 supports, including Al2O3 microspheres prepared in microchannels and two commercially available Al2O3 supports named Sample 1 and Sample 2, were used and the Ni/Al2O3 catalysts were prepared by wetness impregnation method. X-ray diffraction, transmission electron microscopy, H2 temperature-programmed reduction, X-ray photoelectron spectroscopy, N2 adsorption-desorption, and H2 pulse chemisorption analyses combined with a sintering kinetic model were used to investigate the effect of the support pore structure. The narrow pore size distribution (3-15 nm) of Al2O3 microspheres and Sample 1 led to a uniform NiO dispersion for the calcined catalysts. Moreover, the high specific surface area (291 m2/g) and large pore volume (1.0 mL/g) of the Al2O3 microspheres were beneficial for the deposition of NiO particles inside mesopore to obtain a stronger metal-support interaction. Owing to the smaller NiO nanoparticles and stronger metal-support interaction, the reduced Ni/Al2O3 microspheres exhibited an average Ni particle size of 10.2 nm under 36 wt% nickel loading, whereas the average Ni particle size loaded on Sample 1 and Sample 2 were 12.6 nm and 13.2 nm, respectively. The optimized CO2 conversion of 87.0% at 300 degrees C under atmospheric pressure was attributed to the large pore volume and uniform Ni dispersion of Ni/ Al2O3 microsphere catalysts while the same value for Sample 1 and Sample 2 catalysts was 81.5% and 55.0%, respectively. This work provides valuable guidelines for designing effective CO2 methanation support and proves the potential application of Al2O3 microspheres for CO2 methanation.

Metal ion effect on pore size reduction in Mesoporous Aluminosilicate in the presence of TETA as a template and its catalytic performance of CO2 decomposition at lower temperature

Synthesis of an Innovative Framework of Mesoporous Catalyst (Kangolite) by Simple Approach to Promote the Catalytic Activity for CO2 Decomposition

Effect of support texture properties on Ni-Fe/γ-Al_2O_3 catalyst structure and catalytic performance for CO methanation

Mesoporous Co‐Al Oxide Nanosheets As Highly Efficient Catalysts for CO Oxidation

Methanation of Carbon Dioxide on Co-Containing Aluminosilicate Catalysts

Silica–Alumina Catalyst with Bimodal Pore Structure Prepared by Phase Separation in Sol–Gel Process

A sandwich framework effect on the conversion of cylindrical pore into slit pore and its catalytic application

A Novel Framework Interweaving in Mesoporous AlPO4 and Its Function in CO2 Decomposition

Effect of Pore Structure on Ni/Al2O3 Microsphere Catalysts for Enhanced CO2 Methanation

EFFECT OF NH4HCO3 ON PORE STRUCTURE OF ALUMINA

The study of Pt/zeolites for CO oxidation: Effects of skeleton structure and Si/Al ratio

Investigation of palladium catalysts in mesoporous silica support for CO oxidation and CO2 adsorption

CO2 reforming of methane to synthesis gas over sol–gel-made Co/γ-Al2O3 catalysts from organometallic precursors

Catalytic Decomposition of N<SUB>2</SUB>O on Ordered Crystalline Metal Oxides

Synthesis of nanosized mesoporous Co–Al spinel and its application as solid base catalyst

An in Situ Dealloying and Oxidation Route to Co3O4 Nanosheets and Their Ambient‐Temperature CO Oxidation Activity

The effect of synthesis parameters on ordered mesoporous nickel alumina catalyst for CO2 methanation

NiAlFe catalysts based on hydrotalcite-like precursors for low temperature CO 2 methanation: Electronic effects among components and intrinsic activity of Ni site

Effect of pore structure of silica support on the performance of CO 2 capture

Noble Metal Nanoparticles Incorporated Siliceous TUD-1 Mesoporous Nano-Catalyst for Low-Temperature Oxidation of Carbon Monoxide

Mesoporous silica synthesis in sub- and supercritical carbon dioxide