Abstract:This paper examines the potential for synergistic benefits of co-utilizing three waste streams of pinewood, spent fluid catalytic cracking (sFCC) catalyst, and waste CO 2 via thermochemical conversion. For this, a lab-scale fixed-bed semi-batch scale reactor facility is utilized to investigate the impact of using sFCC catalyst and its reusability on the syngas output, quality, and energy during pyrolysis and CO 2 -assisted gasification of pinewood 800–900 °C. Results are reported on the pyrolysis and CO 2 -assisted gasification of pinewood, as well as the impact of using sFCC catalyst and its reusability on syngas output, quality, and energy. Incorporating the catalyst without direct contact with the solid feedstock resulted in syngas enhancement and reusing this catalyst led to <5 wt% char formation from the gasification at 900 °C. The addition of FCC catalyst improved the total CO yield and its rate with an increase in temperature due to improved cracking of volatiles and their simultaneous reforming using CO 2 . In addition, the syngas and energy yields decreased when the catalyst was in direct contact with the solid biomass which also acted as a barrier between the feedstock and gasifying agent, leading to lower CO production. Catalytic gasification at 900 °C using CO 2 provided combustible gas output that was 1.4 times higher than the feedstock mass which suggests that at least 0.4 g of CO 2 consumption for combustible gases, such as H 2 and CO. This points to the synergistic potential in co-utilization of waste streams of biomass, spent FCC catalyst, and CO 2 that provided not only waste management and energy recovery but also energy efficient carbon sequestration. Temperature programmed oxidation of the char residue left from the pyrolysis and gasification tests and coke that forms on the sFCC catalyst revealed conversion of about 0.1 g of the feedstock to coke that was significantly more resistant to oxidation than the char formed.

Unlocking Syngas Synthesis from the Catalytic Gasification of Lignocellulose Pinewood: Catalytic and Pressure Insights

CO Rich Syngas Production from Catalytic CO2 Gasification-Reforming of Biomass Components on Ni/CeO2

Catalytic Hydropyrolysis of Lignin Using NiMo-doped Catalysts: Catalyst Evaluation and Mechanism Analysis

Synergistic Effect of Supercritical Water and Nano-Catalyst on Lignin Gasification

Syngas Characteristics From Catalytic Gasification of Polystyrene and Pinewood in CO2 Atmosphere

Activated char supported Fe-Ni catalyst for syngas production from catalytic gasification of pine wood

From Douglas fir to renewable H<sub>2</sub>-enriched syngas <i>via ex situ</i> catalytic pyrolysis over metal nanoparticles–nanocellulose derived carbon catalysts

Preparation of Syngas Via Catalytic Gasification of Biomass with a Nickel-based Catalyst

From Douglas fir to renewable H-2-enriched syngas via ex situ catalytic pyrolysis over metal nanoparticles-nanocellulose derived carbon catalysts

Catalytic Reforming Of Biomass Raw Fuel Gas To Syngas For Ft Liquid Fuels Production

Catalytic transfer hydrogenolysis of switchgrass lignin with ethanol using spinel-type mixed-metal oxide catalysts affords control of the oxidation state of isolated aromatic products

Lignin carbon-initiated Ni/K/Mo 2 C catalyst for efficient synthesis of higher alcohols from syngas

Catalytic Hydropyrolysis of Biomass over NiMo Bimetallic Carbon-Based Catalysts

Bio-syngas Production from Biomass Catalytic Gasification

In-situ plasma assisted lithium-ion battery cathodes to catalytically pyrolyze lignin for H 2 -rich syngas production

Selective Hydrogenolysis of Lignin Model Compounds to Aromatics over a Cobalt Nanoparticle Catalyst

Role of spent FCC catalyst in pyrolysis and CO 2 -assisted gasification of pinewood

Catalytic conversion of lignocellulosic biomass to fine chemicals and fuels

Anchoring single Ni atoms on CeO2 nanospheres as an efficient catalyst for the hydrogenolysis of lignin to aromatic monomers

Pyrolysis gas from biomass and plastics over X-Mo@MgO (X = Ni, Fe, Co) catalysts into functional carbon nanocomposite: Gas reforming reaction and proper process mechanisms