Abstract:Graphite-like carbon nitride (g-C3N4) and borate modified layered double hydroxides (LDH-B) were successfully fabricated by thermal pyrolysis and modified aqueous miscible organic solvent treatment methods, respectively. Then these nano-additives were introduced to prepare polypropylene-grafted maleic anhydride (PP-g-MA)/g-C3N4 and PP-g-MA/LDH-B nanocomposites using a modified solvent mixing strategy. Several important parameters of the nanocomposites including thermal, mechanical and UV-blocking properties were investigated. Results indicated that pure g-C3N4 exhibited 347.6 and 427.2 degrees C increase in onset decomposition temperature under air and nitrogen conditions, respectively, compared with LDH-B. In case of PP-g-MA nanocomposites, both T-10 and T-50 (the temperature at 10% and 50% weight loss, respectively) were improved by 14.6 and 27.7 degrees C, respectively, by the addition of g-C3N4 while those only increased by 2.3 and 17.8 degrees C upon introducing LDH-B. Furthermore, PP-g-MA/g-C3N4 system showed a remarkable increment (9.8 degrees C) in crystallization temperature while an increase of 4.2 degrees C for PP-g-MA/LDH-B nanocomposite. Introducing g-C3N4 and LDH-B into PP-g-MA led to a reduction of 28% and 19% in pHRR, respectively. It was noted that the incorporation of g-C3N4 caused significant improvement in storage modulus from 2445.0 MPa for neat PP-g-MA to 2783.5 MPa for PP-gMA/g-C3N4 while that of PP-g-MA/LDH-B was dramatically decreased by 27.3%. Optical results indicated that PP-g-MA/g-C3N4 was rendered fascinating UV adsorption ability relative to PP-g-MA/LDH-B. It is expected that the novel two-dimensional nanomaterial could bring new creativity into polymer composites. (C) 2015 Elsevier Ltd. All rights reserved.

Preparation and Properties of Polypropylene Compositions with Binary Carbon Nanofillers

Nanocomposites of Poly(vinylidene Fluoride) with Multiwalled Carbon Nanotubes

Composite Materials Based on Polypropylene and Carbon Nanofillers Obtained by in Situ Polymerization

Fabrication of High-Performance PP/Graphene Nanocomposites Via Friedel–Crafts

Preparation of Polypropylene/MMT Nanocomposites Using Complex Supported Catalysts

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Preparation and Characterization of Novel Polyethylene/carbon Nanotubes Nanocomposites with Core–shell Structure

Striking multiple synergies created by combining reduced graphene oxides and carbon nanotubes for polymer nanocomposites

Carbon black, multiwall carbon nanotubes, expanded graphite and functionalized graphene flame retarded polypropylene nanocomposites

Mechanical and Thermal Properties Modeling, Sorption Characteristics of Multiscale (Multiwalled Carbon Nanotubes/Glass Fiber) Filler Reinforced Polypropylene Composites

Mechanical and Dielectric Properties of Graphene Incorporated Polypropylene Nanocomposites Using Polypropylene-Graft-maleic Anhydride As a Compatibilizer

Polymer Nanocomposite Based on Pyrolyzed Polyacrylonitrile Doped with Carbon Nanotubes: Synthesis, Properties, and Mechanism of Formation

Mesoscopic modeling and experimental validation of thermal and mechanical properties of polypropylene nanocomposites reinforced by graphene-based fillers

Effect of Drawn Orientation on Polypropylene/Organo-Modified Carbon Nanotube Composites Containing Polyrotaxane and Nanocellulose

Enhancing polypropylene composites: synergistic effects of graphene nanoplatelets and glass fibers on mechanical and thermal properties

Polypropylene Nanocomposites Attained by In Situ Polymerization Using SBA-15 Particles as Support for Metallocene Catalysts: Effect of Molecular Weight and Tacticity on Crystalline Details, Phase Transitions and Rheological Behavior

Graphite-like Carbon Nitride and Functionalized Layered Double Hydroxide Filled Polypropylene-Grafted Maleic Anhydride Nanocomposites: Comparison in Flame Retardancy, and Thermal, Mechanical and UV-shielding Properties

Largely Enhanced Thermal and Mechanical Properties of Polymer Nanocomposites Via Incorporating C60@graphene Nanocarbon Hybrid

Preparation and Properties of the Polyimide/multi-Walled Carbon Nanotubes (mwnts) Nanocomposites

Effect of processing conditions on the thermal and electrical conductivity of poly (butylene terephthalate) nanocomposites prepared via ring-opening polymerization

Simultaneous Enhancement on Thermal and Mechanical Properties of Polypropylene Composites Filled with Graphite Platelets and Graphene Sheets