Abstract:Gallium nitride (GaN) high-electron-mobility transistor (HEMT) has the advantages of high switching speed and low ON-resistance, which make it widely used in high-frequency applications to realize high power density. Triangular current mode (TCM) modulation has been used in GaN-based converters to simultaneously achieve high power density and high efficiency through full-range zero voltage switching (ZVS). However, as switching frequency increases, the effect of dead time becomes more significant. Meanwhile, because of the junction capacitors of GaN HEMTs, the optimum dead time changes greatly with the turn-off current. Inappropriate dead time will induce extra loss that goes against the further improvement of power density. In order to minimize the dead-time loss in GaN HEMT-based TCM converter, this article proposes a strategy of adaptive dead-time control. An accurate turn-off transient model is proposed to calculate optimal dead time with consideration of the nonlinear capacitors. Based on this model, a loss model is established to evaluate the effect of dead time involving the short circuit in dead time. A new method of drive signal generation in TCM is proposed to increase the accuracy of dead-time control and reduce the current ripple. By reusing the detection signal in TCM, the adaptive dead-time control is realized without extra sensors. The proposed model is verified by a dual-pulse test, which shows the maximum error between the calculated and the experimental turn-off time is below 3 ns. The proposed adaptive dead-time control is implemented in a GaN HEMT-based boost converter. The experimental results show that the adaptive dead-time control can improve the efficiency over all operation conditions compared with using the fixed dead time, and the total loss is reduced by 26.7% at 800-W load and 70.8% at 50-W load.

An Accurate Datasheet-Based Full-Characteristics Analytical Model of GaN HEMTs for Deadtime Optimization

An Improved Analytical Model of GaN HEMT in Cascode Configuration During Turn-on Transition

A 2–10 MHz GaN HEMTs Half-Bridge Driver with Bandgap Reference Comparator Clamping and Dual Level Shifters for Automotive Applications

A GaN-based MHz Active Clamp Flyback Converter with Adaptive Dual Edge Dead Time Modulation for AC-DC Adapters.

A GaN HEMTs Half-Bridge Driver with Bandgap Reference Comparator Clamping for High-Frequency DC-DC Converter.

A High Efficiency Model-Based Adaptive Dead-Time Control Method for GaN HEMTs Considering Nonlinear Junction Capacitors in Triangular Current Mode Operation

Analysis of Dead-time Related Loss on GaN-based Synchronous Buck Converter

An Accurate Switching Transient Analytical Model for GaN HEMT under the Influence of Nonlinear Parameters

Evaluating Switching Performance of GaN HEMT Using Analytical Modeling

A Normalized Quantitative Method for GaN HEMT Turn-ON Overvoltage Modeling and Suppressing

Deadband Effect and Accurate ZVS Boundaries of GaN-Based Dual-Active-Bridge Converters With Multiple-Phase-Shift Control

Analytical Loss Model of Low Voltage Enhancement Mode GaN HEMTs

Optimal design of GaN HEMT based high efficiency LLC converter

Optimal Dead-time Setting and Loss Analysis for GaN-based Voltage Source Converter

An Analytical Model of Dynamic Power Losses in eGaN HEMT Power Devices

Dynamic Gate Capacitance Model for Switching Transient Analysis in P-GaN Gate HEMTs

Prediction of overshoot and crosstalk of low‐voltage GaN HEMT using analytical model

Modeling and Compensation for Dead-Time Effect in High Power IGBT/IGCT Converters with SHE-PWM Modulation

An Analytical Switching Process Model of Low-Voltage Egan HEMTs for Loss Calculation

Circuit Models of Power MOSFETs Leading the Way of GaN HEMT Modelling—A Review

A Comparative Study on the Switching Performance of GaN and Si Power Devices for Bipolar Complementary Modulated Converter Legs