Abstract:Ni super-alloy is based on a powder coating of NiCrBSi – WC from flexicord wire feedstock material. The role of the CMoAlNi thick layer on the microstructure and interface properties of the coating was examined. The microstructure and interface properties were analyzed for both NiCrBSi-WC and NiCrBSi-WC/CMoAlNi thick layer using optical microscopy (OM), scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectroscopy (EDS), X-ray diffraction analysis (XRD). The mechanical property was evaluated by a Vickers hardness and nano-indentation measurement under 3N and 100mN, respectively. The performance of corrosion interface coatings was investigated in 3.5% of bentonite solution. The applied layer has a flame-spray morphology with unmelted and deformed particles associated with voids and porosities. In contrast, after CMoAlNi under-layers, the interface is a more compact boundary structure with no porosity or cracks. The as-sprayed NiCrBSi-WC coating exhibits high hardness (HIT≈6 GPa), and high Young's modulus (EIT≈ 240 GPa) The ability to resist cracking is significantly higher for the NiCrBSi-WC coating concerning the NiCrBSi-WC/CMoAlNi coating, 7.21 compared to 2.88 (GPA −3 ) x10 6 . The electrochemical potentiodynamic polarisation results show that the NiCrBSi-WC coating's corrosion resistance is higher than that of the NiCrBSi-WC / CMoAlNi coating. Le superalliage Ni est basé sur un revêtement en poudre de NiCrBSi-WC à partir d'un matériau de base en fil flexicord. On a examiné le rôle de la couche épaisse de CMoAlNi sur la microstructure et les propriétés d'interface du revêtement. On a analysé les propriétés de la microstructure et de l'interface pour les couches épaisses de NiCrBSi-WC et de NiCrBSi-WC/CMoAlNi à l'aide de la microscopie optique (MO), de la microscopie électronique à balayage (MEB) couplée à la spectroscopie de rayons X à dispersion d'énergie (EDS) et de l'analyse de la diffraction des rayons X (XRD). On a évalué la propriété mécanique par une mesure de dureté Vickers et de nano-indentation sous 3 N et 100 mN, respectivement. On a étudié les performances des revêtements d'interface contre la corrosion dans une solution à 3.5% de bentonite. La couche appliquée possède une morphologie de projection à chaud avec des particules non fondues et déformées associées à des vides et à des porosités. Par contraste, après les sous-couches de CMoAlNi, l'interface est une structure limite plus compacte sans porosité ni fissure. Le revêtement tel que projeté NiCrBSi-WC présente une dureté élevée (HIT ≈ 6 GPa) et un module d'élasticité de Young élevé (EIT ≈ 240 GPa). La capacité de résister à la fissuration est significativement plus élevée pour le revêtement NiCrBSi-WC avec une valeur de 7.21 (GPa −3 ) x 10 6 par rapport à 2.88 (GPa −3 ) x10 6 pour le revêtement NiCrBSi-WC/CMoAlNi. Les résultats de polarisation potentiodynamique électrochimique montrent que la résistance à la corrosion du revêtement NiCrBSi-WC est plus élevée que celle du revêtement NiCrBSi-WC/CMoAlNi.

Correlation between microstructure properties and the effect of WC addition on the interface, hardness and corrosion performance of thermally sprayed NiCrBSi-WC coating

Influences of Ni/Cu/Cr3C2 Composite Additive on Microstructure and Properties of WC–10Co Fine Grained Hardmetal

Effect of Process Parameters on Microstructure and Properties of AlCoCrFeNi-WC-WS2 Composite Coating Prepared by Laser Cladding

Optimizing Wear Resistance and Tensile Strength of Nickel-Based Coatings through Tungsten Carbide Reinforcement

Microstructure and Properties of FeMnCrAl/Ni Coated WC Coatings Deposited by High Velocity Arc Spraying

Enhanced Adherence, Brittleness, Corrosion, and Sliding Wear by Adding NiCrFeBSiC-Mo on WC-Co Coatings and Hardened Substrates

Effect of Nano WC on Wear and Corrosion Resistances of CoCrFeNiTi High Entropy Alloy Coating

Microstructure, electrochemical corrosion and corrosion mechanism of electroplated Ni–W alloy coating by DFT calculation

Microstructure and wear behavior of WC-reinforced AlCoCrFeNiSi high entropy alloy coatings prepared by high-velocity arc spraying

Comparative Study of Mechanical Performance of AlCrSiN Coating Deposited on WC-Co and cBN Hard Substrates

Influence of Cr on the Surface Properties of the Micro-Textured WC+Co Alloy Coating

Microstructure and mechanical property of high velocity oxy-fuel sprayed WC-Cr3C2-Ni coatings

Study on Microstructure and Thermal Fatigue of FeMnCrAl/WC Coatings

Effect of WC-17Co Content on Microstructure, Mechanical Properties and Wear Resistance of WC-17Co/Ni Composites Produced with Cold Spraying

Study on Microstructure and Properties of FeNiCr/Ni Coated Cr_3C_2 Coatings Deposited by High Velocity Arc Spraying

Influence of Ni and Cr on Anti-corrosion Performance of Tungsten Carbide Base Hard Alloy

Comparative Study of Corrosion Behaviors of WC-NiMo and WC-Co Cemented Carbides

Effect of WC-12Co on the mechanical and wear performance of laser melting deposition nickel-based alloy

Microstructure, interface characteristics and tribological properties of laser cladded NiCrBSi-WC coatings on PH 13-8 Mo steel

Coatings by arc spraying of nanocrystalline metallic wires on carbon steel surfaces: surface hardness, hydrophobicity, and residual stress