Abstract:Screen printing is the most common method used for the production of printed electronics. Formulating copper (Cu) inks that yield conductive fine features with oxidation and mechanical robustness on low-temperature substrates will open up opportunities to fabricate cost-effective devices. We have formulated a screen-printable Cu metal-organic decomposition (MOD) ink comprising Cu formate coordinated to 3-(diethylamino)-1,2-propanediol, a fractional amount of Cu nanoparticles (CuNPs), and a binder. This simple formulation enables ∼70-550 μm trace widths with excellent electrical [∼8-15 mΩ/□/mil or 20-38 μΩ·cm] and mechanical properties with submicron-thick traces obtained by intense pulse light (IPL) sintering on Kapton and poly(ethylene terephthalate) (PET) substrates. These traces are mechanically robust to flexing and creasing where less than 10% change in resistance is observed on Kapton and ∼20% change is observed on PET. Solderable Cu traces were obtained only with the combination of the Cu MOD precursor, CuNP, and polymer binder. Both thermally and IPL sintered traces showed shelf stability (<10% change in resistance) of over a month in ambient conditions and 10-70% relative humidity, suitable for day-to-day fabrication. To demonstrate utility, light-emitting diodes (LEDs) were directly soldered to IPL sintered Cu traces in a reflow oven without the need for a precious metal interlayer. The LEDs were functional not only during bending and creasing of the Cu traces but even after 180 min at 140 °C in ambient air without losing illumination intensity. High definition television antennas printed on Kapton and PET were found to perform well in the ultrahigh frequency region. Lastly, single-walled carbon nanotube-based thin-film transistors on a silicon wafer were fabricated with a screen-printed Cu source and drain electrodes, which performed comparably to silver electrodes with mobility values of 12-15 cm2 V-1 s-1 and current on/off ratios of ∼105 and as effective ammonia sensors providing parts per billion-level detection.

Conformal Cu–CuNi Thermocouple Using Particle-Free Ink Materials

All-Printed Conformal High-Temperature Electronics on Flexible Ceramics

Printable tiny thermocouple by liquid metal gallium and its matching metal

Printable Copper Sensor Electronics for High Temperature

Synthesized silver nanoparticles decorated reduced graphene oxide/silver ink for aerosol jet printed conformal temperature sensor with a wide sensing range and excellent stability

Printing conformal and flexible copper networks for multimodal pressure and flow sensing

A flexible film thermocouple temperature sensor

Conductivity and Flexibility Enhancement of Aerosol-Jet-Printed Sensors Using a Silver Nanoparticle Ink with Carbon Nanotubes

A low-cure-temperature copper nano ink for highly conductive printed electrodes

A Handy Flexible Micro-Thermocouple Using Low-Melting-Point Metal Alloys

Self-Organizing, Environmentally Stable, and Low-Cost Copper–Nickel Complex Inks for Printed Flexible Electronics

A New Copper Ink With Low Sintering Temperature For Flexible Substrates

Screen-printed flexible temperature sensor based on FG/CNT/PDMS composite with constant TCR

Flexible Copper-Based Thermistors Fabricated by Laser Direct Writing for Low-Temperature Sensing

Preparation and performance optimization of resistive flexible temperature sensors prepared by inkjet printing method

Printable and Recyclable Conductive Ink Based on a Liquid Metal with Excellent Surface Wettability for Flexible Electronics

Sintering mechanism of size-controllable Cu-Ag core–shell nanoparticles for flexible conductive film with high conductivity, antioxidation, and electrochemical migration resistance

High‐Sensitivity Flexible Thermocouple Sensor Arrays Via Printing and Photonic Curing

Liquid Metal Printed Biosensor

Formulation of Screen-Printable Cu Molecular Ink for Conductive/Flexible/Solderable Cu Traces

Microsecond-Scale Transient Thermal Sensing Enabled by Flexible Mo1-xWxS2 Alloys