Metal Particle Movement and Induced Insulator Flashover Under Impact Vibration Generated By Switching Operation in GIS

Xing Li,Weidong Liu,Dengwei Ding,Yuan Xu
DOI: https://doi.org/10.1109/tpwrd.2022.3197221
IF: 4.825
2023-04-01
IEEE Transactions on Power Delivery
Abstract:Gas insulated switchgear (GIS) insulation failures occur frequently in field operations, seriously affecting the reliability of power systems. Fault statistics show that nearly half of the insulation flashover faults in field operation are strongly related to the switching operation, and metal particles are considered to be a crucial cause of flashover. The impact vibration generated by the switching operation may activate the metal particles and make them lift and jump in the GIS, reducing the insulation performance. Therefore, in this study, an experimental platform was established to simulate the impact vibration generated by the switching operation. The flashover characteristics induced by metal particles under impact vibration were studied, and the movement behavior of metal particles was also analyzed. The results show that metal particles lying on the enclosure lift under the impact vibration and then keep jumping in the GIS. These particles can jump to cause insulator flashover with high probability after the impact vibration. The longer the metal particles, the higher the probability of insulator flashover, and the shorter the average jump duration of the metal particles before the flashover. Moreover, compared with the flake particles, linear particles are more likely to cause insulator flashover after the impact vibration. This study demonstrates the mechanism of insulator flashover caused by metal particles under impact vibration, which provides a significant support for understanding the insulation failures strongly related to the switching operation in practical applications.
engineering, electrical & electronic
What problem does this paper attempt to address?