Abstract:A Hull cell was used to evaluate a chromium(III) plating bath based on the combination of oxalate and acetate anions. The bath contains chromium(III) sulfate, ammonium oxalate, sodium acetate, boric acid, potassium sulfate, sodium sulfate and sodium dodecyl sulfate (SDS). The working pH was 3.5, and all species were protonated. The chromium(III) plating bath had a faradaic efficiency of 37%, high covering power at 8.2 cm, low deposition potential of 7.3 V, and a deposition rate of 0.4 μm/min. Chromium coatings were obtained at a current density (30A/dm2). This chromium(III) plating bath is competitive considering the state of the art of the electrodeposition of Cr(III). SDS was used as a surfactant to prevent the formation of polymeric oxides (olation reactions) by decreasing the number of nearby ions of Cr(III). Boric acid successfully maintained the pH as a buffer because after 2 h of the electrodeposition process, the pH values change only 0.2 units. The bath was analyzed after electrolysis to check the formation of Cr(VI) ions, and after 2 h of electrodeposition, this cation was not detected. The voltammetry results showed a very high noise with a potential of -0.8 V due to the abundant bubbles that formed and suggest a reduction in a step from Cr(III) to Cr(0). In the literature, the use of oxalate anions is explained by the reaction of exchange of ligands between these anions and the water of the first solvation sphere of Cr(III). In our study, it is postulated that electrostatic interactions of ion-ions and ion-solvents should be very present, and that oxalate and acetate anions are very likely to be in the second sphere of solvation and not in the first as other authors propose. The water molecules in the first solvation sphere are very stable and difficult to replace because they are exposed to two opposite electrostatic forces at their ends.

Determination of S_2O_3~(2-)、 SCN~- and organic acids in electroplating solution by ion choromatography

Kinetic Analysis on Anodic Polarization Behavior of Nanocrystalline Copper in Na2SO4 Solution

Electrochemical Analysis of Cathode in TSV Copper Electroplating

Determination Of Standard Value Of Sulfate Standard Solution By Ion Chromatography

DETERMINATION OF SULFITE, SULFATE RADICAL, NITRITE AND NITRATE IN THE DESULFURIZATION AND DENITRIFICATION BY-PRODUCT BY ION CHROMATOGRAPHY

Solid Phase Extraction–High-Performance Liquid Chromatography Detection of Organic Additives in Acidic Copper Baths II. Polyethylene-Glycol Based Suppressors

Determination of Trace Inorganic Anions in Anionic Surfactants by Single-Pump Column-Switching Ion Chromatography

Detection of Organic Additives in Copper Plating Bath Using Voltammetric Methods That Involve a Screen-printed Nano-Au Electrode

[Preparation of an Agglomerated Ion Chromatographic Stationary Phase with 2,3-Ionene and Its Application in SO4(2-) Analysis].

Determination of anions in the water reducing agent by ion chromatograph

New Method for Measuring Additives in Tin-Plating Solution

Ion Chromatographic Determination of Trace Anions in High Alkali Solutions

Simultaneous Determination of Organic Acids, Methanesulfonic Acid and Inorganic Anions in Aerosol and Precipitation Samples by Ion Chromatography

Quantifying thiolated chemical additives for copper electroplating process

Determination of Sulfite in Sulfuring Ginger by Anion-Exchange Chromatography

Simultaneous Determination of Peroxydisulfate and Conventional Inorganic Anions by Ion Chromatography with the Column-Switching Technique.

Determination of organic acid and inorganic anion by suppressed electric conductance ion chromatography.

Determination of betaine, choline and trimethylamine in feed additive by ion-exchange liquid chromatography/non-suppressed conductivity detection.

Investigation of plating wastewater treatment technology for chromium, nickel and copper

Determination of Inorganic Anions in Ethyl Acetate by Ion Chromatography with an Electromembrane Extraction Method

Study on the Electrodeposition of Chromium from Cr(III) Solution in the Presence of Oxalate and Acetate Anions