Cure monitoring and damage identification of CFRP using embedded piezoelectric sensors network

Xiao Liu,Jun Li,Jianjian Zhu,Yishou Wang,Xinlin Qing

DOI: https://doi.org/10.1016/j.ultras.2021.106470

IF: 4.2

2021-08-01

Ultrasonics

Abstract:<p>Because of the advantages of high specific strength and high specific stiffness, carbon fiber reinforced plastics (CFRP) have been the most ideal materials in the field of civil aviation. Cure monitoring in manufacturing process and damage identification in service stage of CFRP are always hot topics. The Semi-Analytical Finite Element (SAFE) method and micromechanical model are employed to analyse the propagation characteristics of the Lamb-like waves in a continuous flat aluminium plate attached to a viscoelastic unidirectional CFRP in semi-infinite half-space. Then the vacuum bag moulding process of prepregs is monitored using Fiber Bragg Grating (FBG) and piezoelectric sensors encapsulated in Stanford Multiactuator-Receiver Transduction (SMART) Layer. The calculated energy velocities and attenuations of guided waves show the same trends with the numerical results while curing. After the CFRP is demoulded, the damage identification experiments are carried out. By continuing to use the sensor network embedded in the manufacturing phase, the artificial damages can be precisely located. The results demonstrated that the life-cycle monitoring of CFRP can be achieved effectively by the piezoelectric sensors network.</p>

acoustics,radiology, nuclear medicine & medical imaging

What problem does this paper attempt to address?

The paper is primarily dedicated to addressing the issues of cure monitoring during the manufacturing process and damage identification during the service phase of carbon fiber reinforced plastics (CFRP). Specifically: 1. **Cure Monitoring**: During the manufacturing process of CFRP, through the vacuum bag molding process, embedded fiber Bragg grating (FBG) sensors and piezoelectric sensor networks are used to monitor the curing state of the material in real-time. Researchers employed the semi-analytical finite element method (SAFE method) to analyze the propagation characteristics of Lamb waves in viscoelastic unidirectional CFRP and experimentally validated these theoretical predictions. 2. **Damage Identification**: After the CFRP is demolded, the sensor network embedded during the manufacturing process continues to be used for damage identification experiments. By using the piezoelectric sensor network to generate and receive Lamb waves, combined with the probability diagnostic imaging algorithm (PDI), the location of artificial damage can be accurately pinpointed. The paper demonstrates through the above research that the piezoelectric sensor network can effectively monitor CFRP throughout its entire lifecycle, from manufacturing to service. This method not only allows for real-time monitoring of physical changes during the curing process but also enables the timely detection of potential structural damage during the service phase, thereby ensuring the safety and reliability of composite materials.

Cure monitoring and damage identification of CFRP using embedded piezoelectric sensors network

Real-Time Life-Cycle Monitoring of Composite Structures Using Piezoelectric-Fiber Hybrid Sensor Network

Ultrasonic Full Guided Wavefield for Damage Detection in Curved CFRP Parts

Life-Cycle Monitoring of CFRP using Piezoelectric Sensors Network

Life-cycle health monitoring of composite structures using piezoelectric sensor network

Real-time self-monitoring and smart bend recognizing of fiber-reinforced polymer composites enabled by embedded magnetic fibers

Application of piezoelectric MFC sensors and fiber Bragg grating sensors in structural health monitoring of composite materials

Computer-aided feature recognition of CFRP plates based on real-time strain fields reflected from FBG measured signals

Dynamic Feature Identification of Carbon-Fiber-Reinforced Polymer Laminates Based on Fiber Bragg Grating Sensing Technology

Tensile strain and damage self-sensing of flax FRP laminates using carbon nanofiber conductive network coupled with acoustic emission

An implantable, compatible and networkable nanocomposite piezoresistive sensor for in situ acquisition of dynamic responses of CFRPs

Damage Monitoring of Regularly Arrayed Short-Fiber-Reinforced Composite Laminates under Tensile Load Based on Acoustic Emission Technology

Self-Sensing CFRP Fabric for Structural Strengthening and Damage Detection of Reinforced Concrete Structures

Fatigue damage monitoring of composite laminates based on acoustic emission and digital image correlation techniques

Damage detection of FRP structures using the electrical resistance response of MWCNTs networks in a PDMS film substrate

Structural Nde of Cfrp Composite Materials Using Fiber Bragg Grating Sensors

Real-time in-situ process monitoring method based on the self-conductivity of carbon fiber prepreg for automated fiber placement (AFP)

Structural Health Monitoring of Fiber Reinforced Composites Using Integrated a Linear Capacitance Based Sensor

Distributed Sensing of RC Beams with HCFRP Sensors

Embedded Pt-PVDF sensor without compromising mechanical properties of GFRP for on-line sensing

Global and Local Fiber Optic Sensors for Health Monitoring of Civil Engineering Infrastructure Retrofit with FRP Materials