Abstract:Many robotic systems, like surgical robots, robotic hands, and exoskeleton robots, use cable passing through conduits to actuate remote instruments. Cable actuation simplifies the design and allows the actuator to be located at a convenient location, away from the end effector. However, nonlinear frictions between the cable and the conduit account formajor losses in tension transmission across the cable, and a model is needed to characterize their effects in order to analyze and compensate for them. Although some models have been proposed in the literature, they are lumped parameter based and restricted to the very special case of a single cable with constant conduit curvature and constant pretension across the cable only. This paper proposes a mathematically rigorous distributed parameter model for cable-conduit actuation with any curvature and initial tension profile across the cable. The model, which is described by a set of partial differential equations in the continuous time-domain, is also discretized for the effective numerical simulation of the cable motion and tension transmission across the cable. Unlike the existing lumped-parameter-based models, the resultant discretized model enables one to accurately simulate the partial-moving/partial-sticking cable motion of the cable-conduit actuation with any curvature and initial tension profile. The model is further extended to cable-conduit actuation in pull-pull configuration using a pair of cables. Various simulations results are presented to reveal the unique phenomena like backlash, cable slacking, interaction between the two cables, and other nonlinear behaviors associated with the cable conduits in pull-pull configuration. These results are verified by experiments using two dc motors coupled with a cable-conduit pair. The experimental setup has been prepared to emulate a typical cable-actuated robotic system. Experimental results are compared with the simulations and various implications are discussed.

Modeling and Experimental Verification of a Cable-Constrained Synchronous Rotating Mechanism Considering Friction Effect

Dynamics Modeling and Analysis of Cable-Driven Segmented Manipulator Considering Friction Effects

Dynamic Modeling and Experimental Verification of a Cable-Driven Continuum Manipulator with Cable-Constrained Synchronous Rotating Mechanisms

Design and modeling of motion-decoupling mechanism for cable-driven joints

An Efficient Dynamic Modeling and Simulation Method of a Cable-Constrained Synchronous Rotating Mechanism for Continuum Space Manipulator

Quasi-static modeling of a cable-driven continuum manipulator considering non-smooth cable-hole friction and experimental verification

Modeling of a closed loop cable-conduit transmission system

Dynamics modeling and performance verification of the mechanical flight control system on transport airplane

Modeling of transmission characteristics across a cable- conduit system

A Novel Friction Measuring Method and Its Application to Improve the Static Modeling Accuracy of Cable-Driven Continuum Manipulators

Learning-based Cable Coupling Effect Modeling for Robotic Manipulation of Heavy Industrial Cables

ALE formulation for dynamic modeling and simulation of cable-driven mechanisms frictions

Comprehensive kinetostatic modeling and morphology characterization of cable-driven continuum robots for in-situ aero-engine maintenance

Modeling and Verification of Cable-Hole Transmission Tension Ratio Considering the Cable Lateral Extrusion

Modeling of Viscoelastic Cable-Conduit Actuation for Mri Compatible Systems

Workspace Analysis of Cable-driven Continuum Manipulator with Cable-constrained Synchronous Rotating Mechanism

Modeling and Analysis of a Cable-pulley Actuated Lifting System

A 3D Static Modeling Method and Experimental Verification of Continuum Robots Based on Pseudo-Rigid Body Theory

Stiffness Modeling and Dynamics Co-Modeling for Space Cable-Driven Linkage Continuous Manipulators

Modeling Methods for the Long-Span Cable-Driven Parallel Robot

Kinematic models for Cable-driven Continuum Robots with multiple segments and varying cable offsets