Abstract:Many robotic systems, like surgical robots, robotic hands, and exoskeleton robots, use cable passing through conduits to actuate remote instruments. Cable actuation simplifies the design and allows the actuator to be located at a convenient location, away from the end effector. However, nonlinear frictions between the cable and the conduit account formajor losses in tension transmission across the cable, and a model is needed to characterize their effects in order to analyze and compensate for them. Although some models have been proposed in the literature, they are lumped parameter based and restricted to the very special case of a single cable with constant conduit curvature and constant pretension across the cable only. This paper proposes a mathematically rigorous distributed parameter model for cable-conduit actuation with any curvature and initial tension profile across the cable. The model, which is described by a set of partial differential equations in the continuous time-domain, is also discretized for the effective numerical simulation of the cable motion and tension transmission across the cable. Unlike the existing lumped-parameter-based models, the resultant discretized model enables one to accurately simulate the partial-moving/partial-sticking cable motion of the cable-conduit actuation with any curvature and initial tension profile. The model is further extended to cable-conduit actuation in pull-pull configuration using a pair of cables. Various simulations results are presented to reveal the unique phenomena like backlash, cable slacking, interaction between the two cables, and other nonlinear behaviors associated with the cable conduits in pull-pull configuration. These results are verified by experiments using two dc motors coupled with a cable-conduit pair. The experimental setup has been prepared to emulate a typical cable-actuated robotic system. Experimental results are compared with the simulations and various implications are discussed.

Modeling of Viscoelastic Cable-Conduit Actuation for Mri Compatible Systems

Modeling of transmission characteristics across a cable- conduit system

Modeling of a closed loop cable-conduit transmission system

Vibrations Analysis of Cable-Harnessed Plates: Continuum Modeling and Experimental Validation

Active Control of Cable Vibration Using Piezoelectric Actuators Considering Strong Electric Field Nonlinearity

A review of techniques for modeling flexible cables

Learning-based Cable Coupling Effect Modeling for Robotic Manipulation of Heavy Industrial Cables

Modeling and Experimental Verification of a Cable-Constrained Synchronous Rotating Mechanism Considering Friction Effect

Continuum Modeling and Vibration Analysis of Cable-Harnessed Plate Structures of Periodic Patterns

Design and Nonlinear Modeling of a Modular Cable Driven Soft Robotic Arm

A Planar Cable-Driven Under-Sensing Model to Measure Forces and Displacements

Quasi-static modeling of a cable-driven continuum manipulator considering non-smooth cable-hole friction and experimental verification

Design and modeling of motion-decoupling mechanism for cable-driven joints

Modeling of Cables with High and Low Tension Zones using a Hybrid Rod-Catenary Formulation

Stiffness Modeling and Dynamics Co-Modeling for Space Cable-Driven Linkage Continuous Manipulators

An Improved Static Model for Bidirectional Notched Continuum Robot Considering the Cable-tension Loss

Design and Analysis of a Novel Long-Distance Double Tendon-Sheath Transmission Device for Breast Intervention Robots under MRI Field

Laboratory Testing and Modeling of a High-Displacement Cable Bolt

Dynamic Modeling and Experimental Verification of a Cable-Driven Continuum Manipulator with Cable-Constrained Synchronous Rotating Mechanisms

Development of an Effective Modeling Method for the Mechanical Analysis of Three-Core Submarine Power Cables under Tension

Wire In The Cable-Driven System Of Surgical Robot